1. Introduktion
Thank you for choosing the FBT X-Sub 118SA Active Subwoofer. This 18-inch processed compact bass reflex subwoofer is designed to provide powerful and extended low-frequency response, making it an ideal companion for FBT X-LITE and X-PRO series loudspeakers. Featuring a 1200W RMS Class D power amplifier and 4 DSP presets, the X-Sub 118SA delivers exceptional performance for various professional audio applications.
Figure 1.1: FBT X-Sub 118SA Active Subwoofer. This image shows the front and side of the black subwoofer, highlighting its robust grille and integrated side handle.
2. Sikkerhedsoplysninger
Please read and understand all safety instructions before operating the FBT X-Sub 118SA. Retain this manual for future reference.
- Elektrisk sikkerhed: Always connect the subwoofer to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect power during lightning storms or when unused for long periods.
- Ventilation: Sørg for tilstrækkelig ventilation omkring enheden. Bloker ikke ventilationsåbningerne.
- Placering: Place the subwoofer on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
- Service: Forsøg ikke selv at udføre service på denne enhed. Overlad al service til kvalificeret servicepersonale.
- Sikringer: Replace fuses only with the same type and rating as indicated on the unit.
- Høreværn: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating at high volumes.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x FBT X-Sub 118SA 18-inch Processed Compact Bass Reflex Active Subwoofer
- 1 x strømkabel
- 1 x Brugermanual (dette dokument)
4. Nøglefunktioner
The FBT X-Sub 118SA boasts a range of features designed for optimal audio performance:
- Active bass reflex subwoofer design.
- 18mm / 0.70" birch plywood cabinet construction for durability.
- High excursion 18" woofer with a 3" voice coil.
- Powerful 1200W RMS Class D power ampLifer med skiftende strømforsyning.
- Four (4) DSP presets for versatile sound shaping (2 responses with 2 different cut-off frequencies).
- Frequency response from 38Hz to 120Hz (@-6dB).
- Maximum SPL of 136dB peak (Half Space).
- M20 top mount speaker stand socket for satellite speaker integration.
- Control panel with stereo combo XLR/jack inputs, stereo XLR HP filter outputs, level control, preset switch, 0°/180° phase reversal switch, and PRT/LMT LED indicators.
- Two FBT design aluminum handles for easy transport.
- Optional 100mm / 3.93" transport wheels available.
5. Opsætning
5.1 Fysisk placering
The X-Sub 118SA is designed for floor standing placement. Due to its omnidirectional dispersion, it can be positioned in various locations within a room or stage. For optimal bass response, consider placing the subwoofer near a wall or in a corner, which can acoustically reinforce low frequencies. Ensure the unit is stable and has sufficient space for ventilation.
5.2 Forbindelser
The rear panel of the X-Sub 118SA provides all necessary connections and controls. Refer to the diagram below for a visual guide:
Figure 5.1: FBT X-Sub 118SA Rear Control Panel. This diagram illustrates the input/output connections, voltage selector, power switch, and DSP controls on the rear of the subwoofer.
- Input (IN): Tilslut din lydkilde (f.eks. mixer, forforstærker)amplifier) to the XLR/Jack combo inputs. The unit supports stereo input.
- Link (LINK): These XLR outputs allow you to daisy-chain the audio signal to other subwoofers or full-range speakers.
- HP Filter Out (HP FILT OUT): These XLR outputs provide a high-pass filtered signal, ideal for connecting to full-range loudspeakers (e.g., FBT X-LITE or X-PRO series) to ensure proper crossover and system integration.
5.3 Power Connection and Voltage Valg
Før du tilslutter netledningen, skal du sørge for at lydstyrken er korrekt.tagVælgerkontakten på bagpanelet er indstillet til den korrekte voltage for your region (100-120V~ or 220-240V~). Incorrect voltage selection can damage the unit. Once the voltage is set, connect the supplied power cord to the IEC inlet and then to a grounded AC power outlet.
6. Betjening
6.1 Tænd/sluk
After all connections are made, flip the 'ON' switch on the rear panel to power on the subwoofer. The power indicator LED will illuminate. To power off, flip the switch back to 'OFF'.
6.2 Level Control (LEV)
The 'LEV' knob controls the overall output volume of the subwoofer. Start with the level set to minimum and gradually increase it to achieve the desired bass balance with your main speakers.
6.3 DSP-forudindstillinger
The X-Sub 118SA features 4 DSP presets to optimize its performance for different applications and acoustic environments. Use the 'PRESET' button to cycle through the available options:
- Preset 1 (ORIGINAL 80Hz): Standard response with an 80Hz low-pass filter.
- Preset 2 (ORIGINAL 120Hz): Standard response with a 120Hz low-pass filter.
- Preset 3 (PUNCH 80Hz): Enhanced punchy bass response with an 80Hz low-pass filter.
- Preset 4 (PUNCH 120Hz): Enhanced punchy bass response with a 120Hz low-pass filter.
Select the preset that best suits your audio content and desired sound profile.
6.4 Phase Reversal (PHASE 0°/180°)
The 'PHASE' switch allows you to invert the phase of the subwoofer's output by 180 degrees. This is crucial for achieving optimal acoustic alignment with your main loudspeakers. Experiment with both 0° and 180° settings to find the position that yields the strongest and most coherent bass response in your listening environment.
6.5 PRT/LMT LED Indicators
The 'PRT/LMT' LED indicates the status of the protection and limiter circuits:
- Grøn: Normal drift.
- Red (briefly): Limiter is active, indicating that the input signal is approaching or exceeding the maximum safe level. This prevents distortion and protects the speaker.
- Rød (fast): Protection circuit is active, indicating a potential fault or overheating. Reduce the input level or power off the unit and allow it to cool down.
7. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your FBT X-Sub 118SA.
- Rensning: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use abrasive cleaners, solvents, or excessive moisture.
- Opbevaring: Når subwooferen ikke er i brug i længere perioder, skal den opbevares tørt og tempereret, væk fra direkte sollys og ekstreme temperaturer.
- Inspektion: Periodically check the power cord and audio cables for any signs of damage.
8. Fejlfinding
If you encounter issues with your FBT X-Sub 118SA, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm / Enheden tænder ikke | Power cord disconnected; Incorrect voltage selection; Blown fuse; Power outlet issue. | Ensure power cord is securely connected. Verify voltage selector is set correctly. Check and replace fuse if necessary (refer to safety section). Test power outlet with another device. |
| Ingen lydudgang | Input cables disconnected or faulty; Level knob set too low; Incorrect DSP preset; Source device not playing. | Check all audio cable connections. Increase the 'LEV' knob. Cycle through DSP presets. Ensure your audio source is active and playing. |
| Forvrænget lyd | Input signal too high (clipping); Faulty cable; Damaged speaker component. | Reduce the input level from your source device. Check the PRT/LMT LED; if red, reduce level. Try different audio cables. If distortion persists, contact qualified service personnel. |
| Svag eller mudret bas | Incorrect phase setting; Subwoofer placement; DSP preset not optimal. | Toggle the 'PHASE' switch (0°/180°) to find the best acoustic alignment. Experiment with different subwoofer placements. Try different DSP presets. |
If the problem persists after attempting these solutions, please contact FBT customer support or a qualified service technician.
9. Specifikationer
Detailed technical specifications for the FBT X-Sub 118SA Active Subwoofer:
| Feature | Specifikation |
|---|---|
| Konfiguration | Basrefleks |
| Lavfrekvent bashøjttaler | 18" / 3" Voice Coil |
| Frekvensrespons | 38Hz - 120Hz (@-6dB) |
| Maximum SPL (cont/peak) | 136dB Half Space |
| Spredning | Omnidirektionel |
| Indgangsimpedans | 22 kOhm |
| Indgang tilslutning | XLR Combo (with Link) |
| Indbygget Amplivligere | 1200W RMS klasse D |
| DSP-forudindstillinger | 4 (2 responses with 2 different cut-off frequencies) |
| Skabsmateriale | 18mm / 0.70" Birch Plywood |
| Monteringstype | Floor Standing (M20 top mount speaker stand socket) |
| Farve | Sort |
| Varens vægt | 104 pund (34 kg) |
| Strømkilde | Elektrisk med ledning |
| Forbindelsesteknologi | Kablet (XLR) |
| Anbefalede anvendelser | For Surround Sound Systems, Live Sound & Stage |
9.1 Produktdimensioner
Figure 9.1: FBT X-Sub 118SA Subwoofer with Dimensions. The image shows the subwoofer with its approximate dimensions: 31 inches (Depth) x 27 inches (Width) x 32 inches (Height).
- Net Dimension (WxHxD): 510 x 655 x 630 mm
- Produktmål (omtrentlige): 31" D x 27" B x 32" H
10. Garanti
The FBT X-Sub 118SA comes with a limited warranty. For specific details regarding the terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or visit the official FBT webwebsted. Gem din købsbevis til garantikrav.
11. Support
For technical assistance, service, or further inquiries about your FBT X-Sub 118SA, please contact FBT customer support through their official website or authorized distributors. Provide your product model number and a detailed description of the issue when seeking support.