NETUM L6 Wireless Barcode Scanner User Manual

1. Introduktion

Thank you for choosing the NETUM L6 Wireless Barcode Scanner. This device is designed for efficient and accurate 1D barcode scanning, offering wireless convenience and robust performance. This manual provides essential information for setting up, operating, and maintaining your scanner to ensure optimal functionality.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• 1 x NETUM L6 Wireless Barcode Scanner
• 1 x USB Receiver (Wireless Adapter)
• 1 x USB ladekabel
• 1 x brugermanual

Image 2.1: Contents of the NETUM L6 Wireless Barcode Scanner package.

3. Nøglefunktioner

• High-Speed Decoding: Decodes 200 times per second with superior error correction.
• Trådløs forbindelse: 2.4GHz wireless connection with a transmission range of 100-300 meters.
• Lang batterilevetid: Built-in 1600mAh lithium-ion battery provides 6-8 hours of continuous operation after a 3-hour charge.
• Plug and Play: Mini USB receiver allows for immediate use without driver installation.
• Holdbart design: Comfortable button with a service life of up to 5 million presses, resistant to 1.5-meter free fall.
• Alsidig scanning: Supports 1D barcodes including Codebar, UPC-A/E/E1, ISBN/ISSN, EAN-13/8, Code 39, Industrial 2 of 5, Interleaved 2 of 5, Matrix 2 of 5, MSI/Plessey, UK/Plessey, etc.
• Bidirectional Scan Mode: Enhances scanning flexibility.

4. Opsætningsvejledning

Follow these steps to set up your NETUM L6 Wireless Barcode Scanner:

1. Oplad scanneren: Connect the scanner to a USB power source using the provided USB charging cable. The charging indicator will illuminate. A full charge takes approximately 3 hours.
2. Tilslut USB-modtageren: Insert the mini USB receiver into an available USB port on your computer (Desktop or Laptop). The system will automatically detect and install the necessary drivers.
3. Tænd: Press the trigger button on the scanner to power it on. The scanner will automatically attempt to pair with the USB receiver.
4. Test Scanning: Open a text editor or any application that accepts text input. Scan a test barcode. The barcode data should appear in your application.

Image 4.1: Connecting the 2.4GHz USB receiver for wireless operation.

5. Betjeningsvejledning

The NETUM L6 scanner supports both manual and bidirectional scanning modes.

5.1 Grundlæggende scanning

1. Ensure the scanner is powered on and connected to your computer via the USB receiver.
2. Ret scannerens vindue mod den stregkode, du vil scanne.
3. Press and hold the trigger button. A red scan line will emit from the scanner.
4. Position the scan line across the entire barcode. A successful scan will be indicated by an audible beep and/or a visual indicator (e.g., LED flash).
5. The decoded barcode data will be transmitted to your connected device.

Image 5.1: The scanner emitting a red scan line for barcode detection.

5.2 Bidirectional Scanning

The NETUM L6 supports bidirectional scanning, meaning it can read barcodes regardless of the orientation of the scanner relative to the barcode. Simply ensure the scan line covers the entire barcode for successful decoding.

Billede 5.2: Eks.ample of the scanner successfully reading a barcode.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your NETUM L6 Barcode Scanner, follow these maintenance guidelines:

• Rensning: Brug en blød, tør klud til at rengøre scannerens yderside. Brug en rengøringsklud til linsen til scanningsvinduet for at undgå ridser. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Batteripleje: Avoid fully discharging the battery frequently. Recharge the scanner when the low battery indicator appears. If storing the scanner for an extended period, ensure it has a partial charge (around 50%) and recharge it every few months.
• Opbevaring: Opbevar scanneren et køligt og tørt sted væk fra direkte sollys, ekstreme temperaturer og ætsende materialer.
• Håndtering: While the scanner is designed to be durable, avoid dropping it from excessive heights or subjecting it to strong impacts.

7. Fejlfinding

If you encounter issues with your NETUM L6 Barcode Scanner, refer to the following common problems and solutions:

• Scanneren opretter ikke forbindelse:
  • Sørg for, at USB-modtageren er korrekt tilsluttet en fungerende USB-port.
  • Verify the scanner is powered on and has sufficient battery charge.
  • Prøv at sætte USB-modtageren i en anden USB-port.
  • Genstart din computer.
• Scanner læser ikke stregkoder:
  • Sørg for, at stregkoden er ren, ubeskadiget og tydeligt trykt.
  • Make sure the scan line fully covers the barcode.
  • Check the distance between the scanner and the barcode; the optimal scan depth is 10-800mm.
  • Verify that the barcode type is supported by the scanner (1D barcodes only).
  • Ensure there is enough ambient light, but avoid direct glare on the barcode.
• Ingen dataoutput:
  • Confirm the scanner is successfully paired with the receiver (indicated by a beep or LED).
  • Open a text editor or application to confirm data input is possible.
  • Check your computer's device manager to ensure the USB receiver is recognized.
• Kort batterilevetid:
  • Ensure the scanner is fully charged (approximately 3 hours).
  • Batteriets ydeevne kan forringes over tid ved omfattende brug.

8. Specifikationer

9. Garanti og support

The NETUM L6 Wireless Barcode Scanner comes with a 3 MÅNEDERS GARANTI fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl under normal brug.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the NETUM customer service department. Please have your purchase receipt and product model number (NETUM L6) ready when contacting support.