1. Introduktion
Thank you for choosing the PRIMO Deluxe Hot and Cold Bottled Water Dispenser, Model 676065. This appliance provides convenient access to both refreshing cold water and piping hot water for beverages and instant meals. Its compact design makes it suitable for various environments, including homes and small offices. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.
2. Vigtige sikkerhedsoplysninger
ADVARSEL: For at mindske risikoen for brand, elektrisk stød eller personskade skal du altid følge grundlæggende sikkerhedsforanstaltninger.
- Læs alle instruktioner før brug af apparatet.
- This appliance must be properly grounded. Connect only to properly grounded outlets.
- Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
- Nedsænk ikke dispenseren, ledningen eller stikket i vand eller andre væsker.
- Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af børn.
- Må ikke bruges udendørs.
- Må ikke bruges sammen med vand, der er mikrobiologisk usikkert eller af ukendt kvalitet.
- Always unplug the dispenser before cleaning or servicing.
- Exercise caution when dispensing hot water. The hot water tap features a child-resistant safety mechanism.
- Ensure adequate ventilation around the dispenser. Maintain at least 10 cm (4 inches) clearance from walls.
3. Opsætning og installation
3.1 Udpakning
- Tag forsigtigt dispenseren ud af emballagen.
- Undersøg for eventuelle forsendelsesskader. Hvis beskadiget, må du ikke bruge produktet, og kontakte kundesupport.
- Fjern alle emballagematerialer, inklusive beskyttelsesfilm eller -tape.
3.2 Placering
- Place the dispenser on a flat, level, and sturdy surface capable of supporting its weight when full.
- Ensure the dispenser is placed indoors, away from direct sunlight and heat sources.
- Allow at least 10 cm (4 inches) of clearance from the back and sides of the dispenser to a wall for proper ventilation.
- This dispenser does not require plumbing and operates as a standalone unit.
Billede: Forside view of the PRIMO Deluxe Hot and Cold Bottled Water Dispenser with a water bottle on top, a red mug under the hot water tap, and a glass under the cold water tap.
3.3 Water Bottle Installation
- This dispenser is compatible with 10L, 11L, 15L, and 18L water bottles.
- Clean the neck of the water bottle before placing it on the dispenser.
- Fjern hætten fra vandflasken.
- Carefully lift the water bottle and place it upright onto the bottle support collar on top of the dispenser. Ensure it is seated firmly.
Image: Close-up of the dispenser's side, highlighting its universal fitting for 10L, 11L, 15L, and 18L water bottles, its suitability for home and small offices, and lever faucet controls.
3.4 Initial Flushing and Power Connection
- Once the water bottle is installed, allow approximately 5 minutes for the tanks to fill.
- Place a large container under the cold water tap and dispense water until it flows steadily. Repeat for the hot water tap (if applicable, ensure power is off for this initial flush).
- Sæt netledningen i en jordet stikkontakt.
- Turn on the hot and cold water switches located on the back of the dispenser. The indicator lights on the front will illuminate.
4. Betjeningsvejledning
4.1 Tapping af koldt vand
- Place a glass or cup under the blue (cold water) tap.
- Press the blue lever faucet control to dispense cold water.
- Release the lever to stop the flow.
Image: A person's hand dispensing cold water into a glass from the dispenser.
4.2 Udlevering af varmt vand
- Place a heat-resistant cup or mug under the red (hot water) tap.
- This dispenser features a child-resistant safety hot water tap. To dispense hot water, simultaneously press the red safety button and the red lever faucet control.
- Release both the button and the lever to stop the flow.
- Allow approximately 15-20 minutes for the hot water to reach its optimal temperature after turning on the hot water switch.
Image: A person's hand dispensing hot water into a white mug from the dispenser, pressing the red safety button.
5. Vedligeholdelse
Regular maintenance ensures optimal performance and hygiene of your water dispenser.
5.1 Rengøring af drypbakken
- The drip tray is removable and dishwasher-safe for easy cleaning.
- Periodically remove the drip tray and empty any collected water.
- Wash the drip tray with mild soap and water, or place it in the dishwasher.
- Skyl grundigt og tør inden genindsætning.
Image: Close-up of the dispenser's front panel, highlighting quiet cooling and heating (≤48dB), child-resistant safety hot water tap, and removable dishwasher-safe drip tray.
5.2 Udvendig rengøring
- Tag stikket ud af dispenseren før rengøring.
- Tør de udvendige overflader af med en blød, damp klæde.
- Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen.
- The base is made of stainless steel and can be cleaned with a stainless steel cleaner if desired.
5.3 Afkalkning (anbefales årligt)
- Tag stikket ud af dispenseren og fjern vandflasken.
- Drain all water from both hot and cold tanks using the drain plugs (usually located at the back).
- Prepare a descaling solution (e.g., a mixture of white vinegar and water, or a commercial descaling agent designed for water dispensers).
- Pour the solution into the dispenser's reservoir.
- Allow the solution to sit for 30 minutes to 1 hour.
- Hæld opløsningen helt fra.
- Rinse the dispenser thoroughly by filling it with clean water and draining it several times to remove any residual descaling solution.
- Sæt aftapningspropperne i igen, monter en ny vandflaske, og sæt stikket i dispenseren.
6. Fejlfinding
Før du kontakter kundesupport, bedes du se følgende tabel for almindelige problemer og løsninger på disse.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet koldt vand | Cold water switch off; Dispenser unplugged; Empty water bottle; Cooling system malfunction. | Ensure cold water switch is ON; Check power connection; Replace water bottle; Contact customer support. |
| Intet varmt vand | Hot water switch off; Dispenser unplugged; Empty water bottle; Heating system malfunction. | Ensure hot water switch is ON; Check power connection; Replace water bottle; Contact customer support. |
| Vand lækker | Water bottle cracked or improperly seated; Drain plug loose; Internal leak. | Check water bottle for cracks and reseat it properly; Tighten drain plug; Unplug and contact customer support. |
| Water has unusual taste/odor | Old water bottle; Dispenser needs cleaning/descaling. | Replace water bottle; Perform a thorough cleaning and descaling of the dispenser. |
| Dispenseren larmer | Normal operation (compressor/heating); Dispenser not level. | Some noise is normal (≤48dB); Ensure dispenser is on a level surface. |
7. Specifikationer
Below are the technical specifications for the PRIMO Deluxe Hot and Cold Bottled Water Dispenser, Model 676065.
| Feature | Detalje |
|---|---|
| Mærke | PRIMO |
| Modelnummer | 676065 |
| Farve | Sort |
| Materiale | Stainless Steel (Base) |
| Dimensioner (L x B x H) | 30.8 x 28.4 x 93.8 cm (12.1 x 11.2 x 36.9 tommer) |
| Varens vægt | 13.18 kg (29.06 lbs) |
| Cold Tank Capacity | 3 Liters (usable volume 2.7 Liters) |
| Hot Tank Capacity | 1.02 liter |
| Chilled Temperature Range | 4°C til 10°C (39.2°F til 50°F) |
| Hot Temperature Range | 87°C til 92°C (188.5°F til 197.6°F) |
| Støjniveau | ≤48 dB (Quiet Cooling & Heating) |
| Installationstype | Frit stående |
| Placering af vandadgang | Top-loading |
| Faucet Controls | Lever Faucets |
| Strømkilde | El-ledning |
| Særlige funktioner | Child-resistant hot water tap, Removable dishwasher-safe drip tray, No plumbing required, Universal bottle fitting. |
Image: Diagram illustrating the dimensions (97cm height, 33cm width, 33cm depth) and capacities (3L cold tank, 1.02L hot tank) of the dispenser.
Image: Close-up of the dispenser's front panel, highlighting the hot temperature range (188.5°F to 197.6°F), chilled temperature range (39.2°F to 50°F), no plumbing requirement, and stainless steel base.
8. Garanti og support
For warranty information, please refer to the documentation included with your product at the time of purchase. If you require technical assistance, have questions about your product, or need to report a malfunction, please contact PRIMO customer support. You can typically find contact details on the manufacturer's official webwebstedet eller på produktemballagen.
Hav venligst dit modelnummer (676065) og købsbevis klar, når du kontakter support.