Fender 0147372370

Fender Player Plus Jazz Bass Brugsanvisning

Model: 0147372370

Indledning

The Fender Player Plus Jazz Bass is a versatile instrument designed for clarity and powerful tone. It features Player Plus Noiseless Jazz Bass pickups and a 3-band active EQ for precise sound shaping. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your instrument.

Nøglefunktioner omfatter:

  • Player Plus Noiseless Jazz Bass pickups
  • Three-band active EQ with active/passive toggle
  • Four-saddle HiMass bridge for sustain and intonation
  • 12-inch radius fingerboard with rolled edges for comfortable playability
  • Modern "C" neck shape
Fender Player Plus Jazz Bass, Aged Candy Apple Red, front angled view

Billede: Vinklet front view of the Fender Player Plus Jazz Bass in Aged Candy Apple Red with a maple fingerboard and tortoise shell pickguard.

Opsætning

1. Udpakning og inspektion

Carefully remove the bass from its packaging. Inspect the instrument for any visible damage. Retain all packaging materials for future transport or storage.

Fuld front view of Fender Player Plus Jazz Bass

Billede: Fuld front view of the Fender Player Plus Jazz Bass, showcasing the body, neck, and headstock.

2. String Installation and Tuning

The bass comes with strings installed. For optimal performance, ensure they are properly seated in the bridge saddles and nut slots. Tune the bass to standard E-A-D-G using an electronic tuner. Gently stretch new strings to help them settle and hold tune.

Close-up of Fender Jazz Bass headstock and tuning machines

Billede: Nærbillede view of the headstock, showing the tuning machines and Fender logo.

Close-up of Fender Jazz Bass bridge and pickups

Billede: Nærbillede view of the four-saddle HiMass bridge and Player Plus Noiseless Jazz Bass pickups.

3. Forbindelse til en Amplivligere

Use a standard 1/4-inch instrument cable to connect the output jack on the bass to the input of your bass amplifier. Sørg for amplifier's volume is set to a low level before powering it on.

4. Battery Installation (for Active Electronics)

The Player Plus Jazz Bass features active electronics requiring a 9V alkaline battery. The battery compartment is located on the back of the instrument. To install or replace the battery:

  1. Locate the battery compartment cover on the back of the bass.
  2. Åbn låget.
  3. Insert a fresh 9V alkaline battery, observing correct polarity (+/-).
  4. Luk dækslet forsvarligt.
Tilbage view of Fender Jazz Bass showing battery compartment

Billede: Bagside view of the bass body, highlighting the battery compartment for the active electronics.

Operating Your Bass

Kontrol overview

The Player Plus Jazz Bass features a control layout designed for intuitive tone shaping.

Close-up of Fender Jazz Bass control knobs

Image: Close-up of the control plate showing the knobs and active/passive toggle switch.

  • Lydstyrkeknap: Controls the overall output level of the instrument.
  • Pan/Blend Knob: Blends the output between the neck and bridge pickups. Turning it clockwise favors the bridge pickup, counter-clockwise favors the neck pickup.
  • 3-Band Active EQ Knobs:
    • Diskant: Justerer høje frekvenser.
    • Mid: Justerer mellemfrekvenser.
    • Bas: Justerer lave frekvenser.
    These controls are active only when the bass is in active mode.
  • Active/Passive Toggle Switch: This switch allows you to select between active (powered by battery, utilizing the 3-band EQ) and passive (traditional tone, no battery required for basic function, EQ knobs are bypassed) modes.

Playing in Active Mode

In active mode, the 3-band EQ provides significant tonal flexibility. Experiment with the Treble, Mid, and Bass controls to shape your sound. This mode requires a 9V battery to function.

Playing in Passive Mode

Flipping the toggle switch to passive mode bypasses the active EQ circuit. In this mode, the bass operates like a traditional passive Jazz Bass, and the EQ knobs will not affect the tone. The volume and blend controls remain functional.

Opretholdelse

1. Rensning

  • Krop og hals: Use a soft, lint-free cloth to wipe down the body and neck after each use to remove sweat and fingerprints. For deeper cleaning, use a guitar-specific polish or cleaner sparingly.
  • gribebræt: For maple fingerboards, a damp cloth can be used to remove grime. Avoid excessive moisture. Periodically, a specialized fretboard cleaner can be applied.
  • Hardware: Wipe down bridge, tuners, and control knobs with a dry cloth.

2. Udskiftning af strenge

Strings should be replaced regularly, depending on playing frequency and personal preference. Old strings can lose their tone and intonation. Replace one string at a time to maintain neck tension.

3. Udskiftning af batteri

If the sound becomes weak or distorted in active mode, or if there is no sound at all, the 9V battery likely needs replacement. Refer to the "Battery Installation" section under Setup for instructions. Always remove the battery if the instrument will not be used for an extended period to prevent leakage.

4. Opbevaring

Store your bass in a climate-controlled environment, ideally in a gig bag or hard case, to protect it from temperature and humidity fluctuations, which can affect the wood and finish.

Fuld back view of Fender Player Plus Jazz Bass

Billede: Fuld bagende view of the Fender Player Plus Jazz Bass, showing the neck and body from behind.

Fejlfinding

ProblemMulig årsagLøsning
Ingen lyd eller svagt signal
  • Cable faulty or not fully inserted
  • Ampvæske slukket eller lydstyrken er for lav
  • Bass volume knob turned down
  • Dead 9V battery (in active mode)
  • Active/Passive switch in passive mode with no battery
  • Check and replace cable
  • Sikre amplifier is on and volume is up
  • Turn up bass volume
  • Udskift 9V batteri
  • Switch to active mode or replace battery
Summende eller brummende lyd
  • Dårlig jordforbindelse
  • Interferens fra anden elektronik
  • Defekt kabel
  • Single-coil hum (less likely with noiseless pickups, but possible)
  • Kontroller kabelforbindelser
  • Move away from fluorescent lights or computer monitors
  • Prøv et andet kabel
  • Ensure proper shielding (consult a technician if persistent)
Dårlig intonation
  • Old or worn strings
  • Bridge saddle adjustment needed
  • Replace strings
  • Adjust bridge saddles (professional setup recommended)

Specifikationer

  • Mærke: Fender
  • Model: Player Plus Jazz Bass
  • Modelnummer: 0147372370
  • Farve: Aged Candy Apple Red
  • Kropsmateriale: Alder
  • Hals materiale: Ahorn
  • Gribebræt materiale: Ahorn
  • Gribebræt radius: 12 inches (with rolled edges)
  • Halsform: Modern "C"
  • Afhentninger: Player Plus Noiseless Jazz Bass (S-S configuration)
  • Elektronik: 3-band active EQ with active/passive toggle switch
  • Bro: Four-saddle HiMass bridge (Hard Tail)
  • Antal strenge: 4
  • Strengmateriale: Nikkel
  • Udfør type: Satin Finish (neck)
  • Batteritype: 9V Alkaline (for active electronics)
  • Varens vægt: 12.65 pund
  • Produktdimensioner: 45 x 15 x 4.6 tommer

Garanti og support

Fender instruments typically come with a limited warranty covering manufacturing defects. For specific warranty terms and conditions applicable to your Player Plus Jazz Bass, please refer to the warranty card included with your purchase or visit the official Fender webwebsted.

For technical support, service, or parts inquiries, please contact Fender customer service through their official website or authorized service centers. When contacting support, have your model number (0147372370) and serial number ready.

Fender Officiel Webwebsted: www.fender.com

© 2025 Fender Musical Instruments Corporation. Alle rettigheder forbeholdes.

This manual is for informational purposes only. Fender reserves the right to change specifications without notice.