REBEL RB-0003

REBEL RB-0003 3-in-1 Detector User Manual

Model: RB-0003

1. Introduktion

Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.

The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.

2. Sikkerhedsoplysninger

  • Always exercise caution when working near detected objects.
  • Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
  • Hold enheden tør og ren. Udsæt den ikke for fugt eller ekstreme temperaturer.
  • Forsøg ikke at åbne eller ændre enheden. Reparationer bør kun udføres af kvalificeret personale.
  • Fjern batterierne, hvis enheden ikke skal bruges i en længere periode.

3. Produktet er slutview

Familiarize yourself with the components of your REBEL RB-0003 detector:

REBEL RB-0003 3-in-1 Detector in its retail packaging, showing the front of the device with its display and 'SELECT' button.

Figur 1: Forside view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.

Back of the REBEL RB-0003 3-in-1 Detector, showing the battery compartment cover and product label with model number MIE-RB-0003.

Figur 2: Bagside view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.

  • Skærm: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
  • SELECT -knap: Used to switch between detection modes (Metal, Wood, AC Cable).
  • Sensorområde: Located on the back of the device, this area must be flush against the surface for accurate readings.
  • Batterirum: Placeret på bagsiden, til installation af batteri.

4. Opsætning

4.1. Batteriinstallation

  1. Open the battery compartment cover on the back of the device (refer to Figure 2).
  2. Insert the required batteries, ensuring correct polarity (+/-). The device requires batteries for operation.
  3. Luk batterirummets dæksel forsvarligt.

The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.

5. Betjeningsvejledning

5.1. Generel drift

  1. Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
  2. Tryk på VÆLGE button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
  3. Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
  4. Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.

5.2. Metaldetektion

In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.

  • Select the Metal detection mode.
  • Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
  • A distinct audio alert or visual indicator will confirm the presence of metal.

5.3. Wood Detection

The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.

  • Switch to Wood detection mode.
  • Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
  • Mark the detected areas for reference.

5.4. AC Cable Detection

The RB-0003 is capable of detecting live AC 90-250V cables.

  • Select the AC Cable detection mode.
  • Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage er opdaget.
  • Forsigtighed: Always assume wires are live until confirmed otherwise by a qualified electrician.

6. Vedligeholdelse

  • Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
  • Opbevaring: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
  • Udskiftning af batteri: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.

7. Fejlfinding

Problem Mulig årsag Løsning
Enheden tændes ikke. Døde eller forkert installerede batterier. Kontroller batteripolariteten, eller udskift batterierne.
Upræcise aflæsninger. Low battery, improper contact with surface, or environmental interference. Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields.
No detection in AC mode. Wires are not live, or too deep. Ensure power is on to the circuit. Scan slowly and thoroughly.

8. Specifikationer

Feature Detalje
Modelnummer RB-0003 (MIE-RB-0003)
Mærke REBEL
Metaldetektionsdybde Op til 30 mm
Trædetektionsdybde Up to 18 mm (for 30x30 mm profiles)
AC Cable Detection 90-250V
Skærmstørrelse 51 x 25 mm
Indikator for lavt batteri Ja
Strømkilde Batteridrevet
Produktdimensioner 15.5 x 5.4 x 2.7 cm
Varens vægt 157 gram
International Protection Rating IP66

9. Garanti og support

REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webwebsted.

For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webwebsted.

© 2023 REBEL. All rights reserved.