ETA Falco Smart Robot Vacuum Cleaner with Mopping Function User Manual

1. Introduktion

Thank you for choosing the ETA Falco Smart Robot Vacuum Cleaner with Mopping Function. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before using the product and keep it for future reference.

Vigtige sikkerhedsoplysninger

• Always ensure the robot is placed on a stable, level surface.
• Hold enheden væk fra vand og fugt.
• Do not allow children or unauthorized persons to operate the robot.
• Use only the original charging adapter and accessories provided.
• Before cleaning or maintenance, ensure the robot is powered off and unplugged from the charging station.
• Avoid operating the robot near open flames or flammable materials.

2. Produktet er slutview

Komponenter og kontroller

Familiarize yourself with the main parts and controls of your ETA Falco Smart robot vacuum cleaner.

Billede 2.1: Top panel controls. This image shows the main control panel on the top of the robot, including buttons for power, scheduling, and return to charging station, along with a digital display.

Billede 2.2: Underside view. This image displays the bottom of the robot, highlighting the main brush, two side brushes, and the mop attachment.

Billede 2.3: Underside diagram. This diagram labels the key components on the robot's underside, including the side brushes, main brush, and mop attachment.

3. Pakkens indhold

Sørg for, at alle følgende ting er til stede ved udpakning:

• ETA Falco Smart Robot Vacuum Cleaner
• Opladning Station
• Opladningsadapter
• Fjernbetjening
• 2x Spare Side Brushes
• Special Rotary and Lamella Brush
• 2x Cleaning Cloths (Mop Pads)
• Ekstra HEPA-filter
• Mop Attachment with 300 ml Water Tank
• Virtuel væg

4. Opsætning

4.1 Indledende opladning

1. Placer ladestationen op ad en væg i et åbent område, og sørg for, at der ikke er forhindringer inden for 1 meter til siderne og 2 meter foran.
2. Connect the charging adapter to the charging station and plug it into a power outlet.
3. Place the robot vacuum cleaner on the charging station. Ensure the charging contacts align. The robot will begin charging automatically. A full charge takes approximately 5 hours.

4.2 Montering af sidebørster

Attach the side brushes to the designated posts on the underside of the robot by pressing them down until they click into place. Ensure the 'L' and 'R' markings on the brushes match the corresponding markings on the robot.

4.3 Connecting to the ETA SMART App

The ETA SMART app enhances the functionality of your robot. Download the app from your smartphone's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network and pair it with the app.

4.4 Setting up the Virtual Wall

The virtual wall creates an invisible barrier to restrict the robot's access to certain areas. Place the virtual wall device on the floor where you want to create a boundary. Ensure the infrared beam is directed towards the area you wish to block. The robot will detect this beam and avoid crossing it.

Billede 4.1: Robot with charging station and virtual wall. This image shows the robot positioned near its charging station, with a virtual wall device placed nearby to illustrate its function.

5. Betjeningsvejledning

5.1 Rengøringstilstande

The ETA Falco Smart offers four distinct cleaning modes:

• SMART: General cleaning mode for optimal coverage.
• KLASSISK: Standard rengøringsmønster.
• KANT: Rengør langs vægge og møbelkanter.
• FÅ ØJE PÅ: Koncentreret rengøring i et specifikt område.

You can select these modes via the ETA SMART app or the remote control.

5.2 Planlægning af rengøring

Use the ETA SMART app to set a cleaning schedule for your robot. You can program specific times and days for the robot to automatically start cleaning.

5.3 Manuel kontrol

You can manually control the robot's movement and functions using the remote control or the ETA SMART app. The app also allows you to monitor cleaning activity, battery charge, and view cleaning routes.

Billede 5.1: ETA Smart App features. This image displays the ETA Smart App interface on a smartphone, highlighting features such as remote control, cleaning history, activity monitoring, battery status, cleaning modes (SMART, CLASSIC, EDGE, SPOT), cleaning schedule, mopping intensity control, and suction power adjustment.

5.4 Moppefunktion

1. Fill the 300 ml water tank with clean water. Do not use detergents or cleaning solutions that are not approved for robot vacuums.
2. Attach a clean mop pad to the mop attachment.
3. Slide the mop attachment into the designated slot on the underside of the robot.
4. Start en rengøringscyklus. Robotten vil støvsuge og moppe samtidigt.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din robotstøvsuger.

6.1 Rengøring af støvbeholder og filter

1. Tryk på udløserknappen til støvbeholderen, og fjern støvbeholderen.
2. Åbn støvbeholderen, og tøm dens indhold i en skraldespand.
3. Remove the HEPA filter and primary filter. Tap them gently to remove dust. If washable, rinse under running water and allow to air dry completely before reinserting.
4. Wipe the inside of the dust bin with a dry cloth.
5. Reassemble the filters and dust bin, then reinsert into the robot.

6.2 Rengøring af hovedbørsten

1. Vend robotten om.
2. Remove the main brush cover by pressing the release tabs.
3. Løft hovedbørsten ud.
4. Use the cleaning tool (if provided) or scissors to remove hair and debris tangled around the brush.
5. Clean the brush compartment.
6. Sæt hovedbørsten i igen, og fastgør dækslet.

6.3 Rengøring af sidebørster

Periodically check the side brushes for tangled hair or debris. If necessary, remove them by gently pulling upwards and clean them. Replace worn or damaged brushes with the spare ones provided.

6.4 Rengøring af moppepude og vandtank

After each mopping session, remove the mop pad and wash it thoroughly. Empty any remaining water from the water tank and rinse it. Allow both to air dry completely before storing or reusing.

6.5 Rengøring af sensorer

Wipe the anti-drop sensors, bumper sensors, and charging contacts on the robot and charging station with a clean, dry cloth to ensure proper function.

7. Fejlfinding

Hvis din robotstøvsuger støder på et problem, kan du se følgende almindelige problemer og løsninger:

Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte kundesupport.

8. Specifikationer

Technical specifications for the ETA Falco Smart Robot Vacuum Cleaner (Model ETA251590000):

9. Garanti og support

For warranty information, product support, or to inquire about spare parts, please refer to the warranty card included with your purchase or visit the official ETA webwebsted. Gem din købsbevis til garantikrav.