M-Wave M14w Wireless Bicycle Computer User Manual

1. Introduktion

The M-Wave M14w is a compact and efficient wireless bicycle computer designed to provide essential cycling data for enthusiasts and casual riders alike. Its digital transmission technology ensures a clean, wire-free installation, eliminating cable clutter. This device offers a range of functions including real-time speed, distance tracking, and a digital clock, with the flexibility of metric or English unit conversion. Engineered for durability, the M14w features an IP44 ingress protection rating, safeguarding it against splashing water and small particles, making it a reliable companion for various weather conditions. The computer is designed for easy, tool-free mounting on handlebars or stems, and comes with all necessary components, including batteries, for immediate use.

Billede 1.1: Forside view of the M-Wave M14w bicycle computer displaying speed and distance.

2. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle følgende komponenter er til stede:

• M-Wave M14w Cyclocomputer Unit
• Trådløs hastighedssensor
• Hjulmagnet
• Handlebar/Stem Mounting Bracket
• CR2032 Batteries (pre-installed or included separately)
• Zip Ties or Mounting Straps

Image 2.1: The M-Wave M14w bicycle computer shown in its retail packaging, highlighting its wireless capabilities and functions.

3. Opsætning og installation

3.1. Batteriinstallation

The M-Wave M14w computer and its wireless sensor require CR2032 batteries. Batteries are included with the product. If not pre-installed, carefully open the battery compartment on the back of the computer unit and the sensor, insert the CR2032 battery with the positive (+) side facing up, and securely close the compartment.

3.2. Montering af computerenheden

The computer unit can be mounted on your bicycle's handlebar or stem without the need for any tools.

1. Place the mounting bracket on your desired location on the handlebar or stem.
2. Secure the bracket firmly using the provided zip ties or straps, ensuring it is stable and does not rotate.
3. Slide the M14w computer unit onto the mounting bracket until it clicks securely into place.

3.3. Montering af hastighedssensor og magnet

The wireless speed sensor and wheel magnet work together to measure your speed and distance.

1. Attach the wireless speed sensor to the front fork of your bicycle using the provided zip ties or straps. Position it on the side where the wheel magnet will be installed.
2. Fastgør hjulmagneten til en eger på forhjulet.
3. Adjust the position of both the sensor and the magnet so that they are aligned and the gap between them is approximately 1-3mm when the wheel rotates. The magnet should pass directly in front of the sensor's marked detection area.

Billede 3.1: Bagside view of the M-Wave M14w computer unit, showing the battery compartment and digital transmission components, alongside the wireless speed sensor.

3.4. Indledende konfiguration

After installation, you will need to configure the computer for accurate readings.

1. Tænd: The device will automatically power on when motion is detected or a button is pressed.
2. Enhedsvalg: Press the "Mode" button to cycle through settings. Use the "Set" button to select between Metric (km/h) and English (mph) units.
3. Indstilling af hjulstørrelse: This is crucial for accurate speed and distance measurements. Refer to your bicycle tire's sidewall for its circumference in millimeters (e.g., 2070mm for a 700x23c tire). Use the "Set" and "Mode" buttons to input this value into the computer.
4. Indstilling af ur: Set the current time using the "Set" and "Mode" buttons.
5. Parring (hvis nødvendigt): The computer and sensor should automatically pair. If not, consult the troubleshooting section or perform a manual pairing sequence (often involves holding a button on the sensor or computer during initial setup).

4. Betjeningsvejledning

The M-Wave M14w features two primary buttons: "Set" and "Mode", located at the bottom of the display.

Billede 4.1: Nærbillede view of the M-Wave M14w display, showing the "Set" and "Mode" buttons for operation.

4.1. Navigationstilstande

Tryk på Mode button to cycle through the various display functions. The M14w typically displays:

• Current Speed (SPD): Your real-time riding speed.
• Gennemsnitshastighed (AVS): Your average speed for the current trip.
• Maksimal hastighed (MXS): Den højeste hastighed registreret under den aktuelle tur.
• Rejseafstand (DST): The distance covered during the current trip.
• Samlet afstand (ODO): The cumulative distance covered since the computer was reset or first used.
• Ridetid (TM): The duration of your current ride.
• Ur (CLK): Aktuel tid.
• Scanningstilstand: Automatically cycles through various functions.

4.2. Adjusting Settings and Resetting Data

To adjust settings or reset trip data:

• Indtastning af indstillinger: I urtilstand skal du trykke på og holde nede Sæt button to enter the setting menu (e.g., for wheel size, unit selection). Use Mode to change values and Sæt for at bekræfte og gå til den næste indstilling.
• Nulstilling af rejsedata: To clear current trip data (DST, AVS, MXS, TM), navigate to any of these modes and press and hold the Sæt button until the values reset to zero. The Total Distance (ODO) cannot be reset through this method.

4.3. Automatisk tænd/sluk

The M14w features an automatic power-saving function. The device will automatically power on when it detects movement from the wheel sensor or when any button is pressed. It will power off after a period of inactivity to conserve battery life.

5. Vedligeholdelse

Proper maintenance ensures the longevity and accuracy of your M-Wave M14w bicycle computer.

• Rensning: Tør computerenheden og sensoren af ​​med en blød kludamp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige displayet ellerasing.
• Vandtæthed: The M14w has an IP44 rating, meaning it is protected against splashing water from any direction. While it can withstand light rain, avoid submerging the device in water or exposing it to high-pressure water jets.
• Udskiftning af batteri: When the display becomes dim or erratic, it's time to replace the CR2032 batteries in both the computer and the sensor. Ensure correct polarity when inserting new batteries.
• Sensor- og magnetjustering: Periodically check that the speed sensor and wheel magnet remain properly aligned (1-3mm gap) and securely fastened. Vibrations from riding can sometimes cause them to shift.
• Opbevaring: If storing the bicycle computer for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage to the device.

6. Fejlfinding

If you encounter issues with your M-Wave M14w, try the following troubleshooting steps:

• Intet display / Mørkt display:
  • Kontroller om batterierne er korrekt installeret.
  • Replace batteries in both the computer unit and the sensor.
• Ingen hastigheds-/afstandsmåling:
  • Ensure the wheel magnet and speed sensor are properly aligned and the gap is within 1-3mm.
  • Check if the sensor battery is dead or low. Replace if necessary.
  • Verify that the computer and sensor are paired. If not, try re-pairing by removing and reinserting the computer battery, then spinning the wheel to activate the sensor.
  • Ensure the computer is securely seated in its mounting bracket.
• Upræcise læsninger:
  • Double-check the wheel circumference setting. An incorrect value will lead to inaccurate speed and distance.
  • Ensure the sensor and magnet are not obstructed by dirt or debris.
  • Interference from other wireless devices or strong electromagnetic fields can sometimes affect readings. Try moving away from such sources.
• Difficulty Setting / Sporadic Operation (as per user feedback):
  • If the device is difficult to set or operates sporadically, try a full reset. This often involves removing the battery for a few minutes, then reinserting it. Be aware that this will clear all settings and trip data, requiring re-configuration of wheel size and time.
  • Ensure buttons are not stuck or dirty.
• Computer Not Powering On Automatically:
  • Ensure the sensor is active and transmitting. Spin the wheel to check.
  • Kontroller sensorens batteri.

7. Specifikationer

8. Garanti og support

The M-Wave M14w Wireless Bicycle Computer comes with a 2 års producentgarantiDenne garanti dækker defekter i materialer og udførelse under normal brug. Den dækker ikke skader som følge af misbrug, ulykker, uautoriserede ændringer eller normal slitage.

For warranty claims, technical support, or further inquiries, please contact the manufacturer, Cycle Force Group, or your point of purchase. Keep your proof of purchase for warranty validation.

For more information and product updates, you may visit the official M-Wave website or the Cycle Force Group webwebsted.