JOOWIN WiFi Extender 03 User Manual

1. Introduktion

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your JOOWIN WiFi Extender 03. Please read this manual carefully before using the device to ensure optimal performance and to prevent damage.

Image: The JOOWIN WiFi Extender 03, a white rectangular device with four adjustable external antennas. It features indicator lights and the JOOWIN logo on its front face, with blue arcs indicating wireless signal propagation.

2. Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

• 1x JOOWIN WiFi Extender 03
• 1x netværkskabel
• 1x Installationsvejledning

3. Opsætningsvejledning

3.1. Tænder

1. Plug the JOOWIN WiFi Extender into a standard electrical outlet.
2. Wait for the power indicator light to turn solid, indicating the device is ready.

3.2. Konfigurationstilstande

The extender supports two main modes: Repeater Mode and AP Mode.

3.2.1. Repeater Mode (Extending Existing WiFi)

1. Connect your computer or mobile device to the extender's default Wi-Fi network (e.g., "JOOWIN_XXXX"). No password is required initially.
2. Åbn a web browser og indtast standard IP-adressen (f.eks. 192.168.10.1) eller domænenavn (f.eks. it.joowin.com) i adresselinjen.
3. Log in using the default username and password (usually "admin" for both).
4. Select "Repeater Mode" from the setup wizard.
5. Scan for available Wi-Fi networks and select your home network.
6. Enter your home network's Wi-Fi password.
7. Assign a new SSID (network name) for the extended network or keep it the same as your main network.
8. Click "Apply" or "Save" and wait for the extender to restart.
9. Relocate the extender to an optimal position between your router and the desired coverage area.

3.2.2. AP-tilstand (adgangspunkt)

1. Connect the extender to your router using the provided network cable. Plug one end into the extender's RJ45 port and the other into a LAN port on your router.
2. Tilslut din computer eller mobilenhed til extenderens standard Wi-Fi-netværk.
3. Åbn a web browseren og indtast standard-IP-adressen eller domænenavnet.
4. Log ind med standardbrugernavn og -adgangskode.
5. Vælg "AP-tilstand" i opsætningsguiden.
6. Configure the new Wi-Fi network name (SSID) and password for the access point.
7. Click "Apply" or "Save" and wait for the extender to restart.

4. Betjening af enheden

4.1. Indikatorlys

The device features several indicator lights to show its status:

• Strømlys: Solid indicates power on.
• WPS Light: Blinking indicates WPS pairing in progress. Solid indicates successful connection.
• Signallys: Indicates the strength of the signal received from the main router (in Repeater Mode). More lights typically mean a stronger signal.

4.2. WPS-funktion

The WPS (Wi-Fi Protected Setup) button allows for easy connection to your main router without manual configuration:

1. Tryk på WPS-knappen på din primære router.
2. Within two minutes, press the WPS button on the JOOWIN WiFi Extender.
3. The WPS light on the extender will blink and then turn solid upon successful connection.

5. Vedligeholdelse

5.1. Firmwareopdateringer

Periodically check the JOOWIN official website for firmware updates to ensure optimal performance and security. Firmware updates can typically be installed via the web ledelsesgrænseflade.

5.2. Rensning

Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure the device is unplugged before cleaning.

5.3. Nulstilling af enheden

If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset:

• With the extender powered on, use a paperclip or a thin object to press and hold the reset button (usually located in a small pinhole) for approximately 5-10 seconds.
• Release the button when the indicator lights flash, indicating the device is resetting.
• The extender will revert to its factory default settings.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

8.1. Garantioplysninger

JOOWIN products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official JOOWIN webwebstedet for detaljerede garantivilkår og -betingelser, der er specifikke for din region.

8.2. Teknisk support

For technical assistance, troubleshooting, or further inquiries, please contact JOOWIN customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (JW-WR758AC-UKWS-02) and purchase details ready.