1. Introduktion
Welcome to the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This manual provides essential information for the safe and efficient operation of your inverter. The IPower-Plus series is designed to convert 12V DC battery power into 230V AC pure sine wave electricity, suitable for various applications including off-grid home emergency lighting and vehicle-mounted systems.
Key features include a 180-degree rotatable LCD display, compatibility with lithium batteries, and a USB output port. The inverter incorporates surge current suppression technology to protect lithium battery cells and the Battery Management System (BMS) from damage caused by high inrush currents. It also features low idle loss and a sleep mode for enhanced energy efficiency.
2. Sikkerhedsinstruktioner
WARNING: Failure to follow these safety instructions may result in serious injury, death, or damage to the inverter and other equipment.
- Read this entire manual before installation and operation.
- Installation skal udføres af kvalificeret personale.
- Sørg for korrekt ventilation omkring inverteren for at forhindre overophedning.
- Do not expose the inverter to water, rain, snow, or any liquids.
- Connect the inverter to a battery bank with the correct voltage (12V DC).
- Observe correct polarity when connecting DC input cables (+ to + and - to -). Reverse polarity will cause damage.
- Sørg for, at alle forbindelser er stramme og sikre for at forhindre løse forbindelser og buedannelse.
- Do not connect the inverter to an AC utility grid or other AC power sources.
- Avoid short-circuiting the AC output.
- Keep flammable materials away from the inverter.
- Åbn ikke inverteren casing; der er ingen dele indeni, som kan serviceres af brugeren.
- Afbryd altid strømmen, før du udfører vedligeholdelse eller rengøring.
3. Produktet er slutview
3.1 Funktioner
- Pure Sine Wave Output: Leverer vekselstrøm af høj kvalitet, der er egnet til følsom elektronik.
- 180-Degree Rotatable LCD Display: Giver mulighed for fleksibel viewing angles of operational data.
- Kompatibilitet med litiumbatterier: Designed to work effectively with lithium battery systems.
- USB-udgang: Integrated 5VDC / Max.1A USB port for charging small devices.
- Surge Current Suppression: Protects battery cells and BMS from high inrush currents.
- Low Idle Loss / Sleep Mode: Minimizes power consumption when no load or light load is present.
- Isolated RS485 Communication Interface: (Optional) Enables remote monitoring, management, and settings adjustment via PC software or mobile app.
3.2 Komponenter
The EPEVER IPower-Plus Series IP3000-12 Plus inverter includes the main unit and necessary connection accessories.
Figur 1: Forside view of the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This image shows the main body of the inverter with its LCD display and branding.
Figure 2: Rear panel of the EPEVER IPower-Plus Series IP3000-12 Plus inverter. This view highlights the DC input terminals, AC output terminals, USB port, and RS485 communication port.
Figur 3: Nederst view of the EPEVER IPower-Plus Series IP3000-12 Plus inverter, showing the integrated cooling fans for thermal management.
Inkluderede komponenter:
- Inverter enhed
- RS485 Communication Port (integrated)
- USB Output (integrated)
- Jordkabel
- DC indgangskabel
- AC udgangskabel
4. Opsætning
4.1 Udpakning og inspektion
- Carefully unpack the inverter and all accessories.
- Inspect the unit for any visible damage that may have occurred during shipping. Contact your supplier if any damage is found.
- Kontroller, at alle komponenterne, der er anført i afsnit 3.2, er til stede.
4.2 Montering
- Choose a dry, well-ventilated location away from direct sunlight, heat sources, and moisture.
- Sørg for, at der er tilstrækkelig plads omkring inverteren for korrekt luftstrøm, især omkring køleventilatorerne.
- Mount the inverter securely to a stable surface using appropriate fasteners. The mounting dimensions are 532 x 145mm.
4.3 Ledningsforbindelser
CAUTION: Before making any connections, ensure the inverter is switched OFF and the battery bank is disconnected or fused.
- Jording: Connect the ground terminal of the inverter to an earth ground point using the provided ground cable. This is crucial for safety.
- DC-indgangsforbindelse:
- Connect the positive (+) terminal of your 12V DC battery bank to the positive (+) DC input terminal on the inverter.
- Connect the negative (-) terminal of your 12V DC battery bank to the negative (-) DC input terminal on the inverter.
- Use appropriate cable gauge for the DC input to minimize voltage drop og sørg for sikker drift.
- AC-udgangstilslutning:
- Connect your AC loads (appliances) to the AC output terminals of the inverter.
- Ensure the total power consumption of your AC loads does not exceed the inverter's continuous power rating (3000W).
- Valgfrie tilslutninger (RS485 og USB):
- If using the RS485 communication feature, connect the RS485 cable to the designated port for remote monitoring.
- The USB port can be used to charge compatible 5VDC devices.
5. Betjeningsvejledning
5.1 Tænd for inverteren
- After all connections are securely made and verified, connect the battery bank (if not already connected).
- Switch on the DC input breaker or fuse, if installed.
- Press the power button on the inverter. The LCD display will illuminate, indicating the inverter is operational.
- The inverter will begin converting DC power to AC power.
5.2 Slukning af inverteren
- Turn off all connected AC loads.
- Press and hold the power button on the inverter until the display turns off.
- Switch off the DC input breaker or fuse, and disconnect the battery bank if the inverter will not be used for an extended period.
5.3 LCD-skærm
The LCD display provides real-time operational data. It can be rotated 180 degrees for optimal viewing. Information typically displayed includes:
- Indgang DC Voltage
- Udgang AC Voltage
- Udgangseffekt (watt)
- Udgangsfrekvens (Hz)
- Batteristatus
- Fejlkoder (hvis nogen)
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din inverters levetid og optimale ydeevne.
- Rensning: Periodically clean the exterior of the inverter with a dry cloth to remove dust and debris. Ensure cooling vents are clear. Do not use liquid cleaners.
- Tilslutningstjek: Annually inspect all electrical connections (DC input, AC output, ground) to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
- Ventilation: Ensure the area around the inverter remains clear and well-ventilated. Check that the cooling fans are operating correctly when the inverter is under load.
- Batterivedligeholdelse: Follow the manufacturer's guidelines for your specific battery type. Ensure batteries are properly charged and maintained to prolong their lifespan and ensure stable power supply to the inverter.
7. Fejlfinding
This section outlines common issues and their potential solutions. If the problem persists, contact customer support.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen AC-udgang / Inverteren tænder ikke | Lavt batteri voltage Løse DC-forbindelser Inverter-sluk Blown DC fuse/breaker | Charge battery or check battery health Check and tighten all DC connections Tænd for inverterkontakten Check and replace fuse/reset breaker |
| Overload Alarm / Shutdown | Connected load exceeds inverter rating High inrush current from inductive loads | Reduce total connected load Start inductive loads one at a time; consider a higher capacity inverter if frequent |
| Overheating Alarm / Shutdown | Dårlig ventilation For høj omgivelsestemperatur Continuous high load | Ensure clear airflow around inverter Relocate inverter to a cooler environment Reduce load or operate intermittently |
| Abnormal AC Output Voltage/Frekvens | Lav DC input voltage Faulty inverter | Tjek batterivolumentage og forbindelser Kontakt kundesupport |
| USB-porten virker ikke | Overload on USB port Faulty USB device | Disconnect and reconnect USB device Try a different USB device |
7.1 Beskyttelsesfunktioner
The inverter is equipped with extensive protection features:
- Omvendt polaritetsbeskyttelse: Prevents damage from incorrect DC input wiring.
- Over-voltage Beskyttelse: Shuts down if DC input voltage overskrider sikre grænser.
- Under-voltage Beskyttelse: Shuts down to protect batteries from over-discharge.
- Overbelastningsbeskyttelse: Shuts down if AC output load exceeds rated capacity.
- Kortslutningsbeskyttelse: Protects against damage from AC output short circuits.
- Overtemperaturbeskyttelse: Shuts down if internal temperature becomes too high.
8. Specifikationer
| Parameter | Værdi |
|---|---|
| Systembatteriets volumtage | 12V DC |
| Kontinuerlig kraft | 3000W |
| Surge Power (5s) | 6000W |
| Udgang AC Voltage | 220VAC (±3%); 230VAC (-7% ~ +3%) |
| Udgangsfrekvens | 50 / 60Hz ±0.2% |
| Maksimal effektivitet | >94% (30% belastning) |
| Ingen belastning strøm | <1.6A |
| USB udgang | 5VDC / Max.1A |
| RS485-grænsefladeudgang | 5VDC / 200mA |
| Beskyttelsesklasse | IP20 |
| Dimensioner (L x B x H) | 557 × 231.5 × 123 mm |
| Monteringsdimensioner | 532 x 145 mm |
| Nettovægt | 10.5 kg |
| Output bølgeform | Ren Sine Wave |
| Certificeringer | CE, RoHS |
9. Garanti og support
9.1 Garantioplysninger
The EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter comes with a 2 års producentgaranti fra købsdatoen. Denne garanti dækker materiale- og fabrikationsfejl under normal brug og service.
Garantien dækker ikke:
- Skader forårsaget af forkert installation eller ledningsføring.
- Skader forårsaget af uautoriserede reparationer eller modifikationer.
- Damage caused by natural disasters, accidents, or misuse.
- Damage from operating the inverter outside its specified environmental limits.
9.2 Teknisk support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your EPEVER dealer or the official EPEVER customer support channel. Please have your product model number and purchase information ready when contacting support.