Techage SL669W

Techage Solar Battery Powered Metal Fake Security Camera Instruction Manual

Model: SL669W | Brand: Techage

1. Produktet er slutview

The Techage Solar Battery Powered Metal Fake Security Camera is designed to provide a visual deterrent against potential intruders, mimicking the appearance and some functionalities of a real security camera. It features solar charging, motion-activated floodlights, and a realistic design to enhance your property's perceived security without the complexity or cost of a full surveillance system.

Two white Techage fake security cameras with solar panels

Image: Two white Techage fake security cameras with integrated solar panels, designed to look like real surveillance equipment.

Nøglefunktioner:

  • Realistisk udseende: Designed to closely resemble actual security cameras, complete with a dummy antenna and a flashing red LED light.
  • Motion-Activated Floodlights: Equipped with 8 LED floodlights that automatically turn on for 20 seconds when motion is detected within 28-32 feet at night, providing an 800 lumen super brightness.
  • Solcelledrevet: Features a built-in solar panel for continuous charging, eliminating the need for wiring or battery replacement.
  • Nem installation: No complex wiring required; mounts easily to walls, ceilings, or other surfaces with included screws and a drilling template.
  • Holdbar og vejrbestandig: Konstrueret med et metal casing and IP66 waterproof and dustproof performance, suitable for outdoor use in temperatures ranging from -20°F to 160°F.

2. Opsætning og installation

Follow these steps for optimal placement and installation of your Techage Fake Security Camera:

  1. Vælg placering: Select a prominent outdoor location where the camera will be visible to deter potential intruders. Ensure the solar panel receives ample direct sunlight throughout the day for efficient charging.
  2. Forberedelse til montering: Use the provided drilling template to mark the screw holes on your desired mounting surface (wall, ceiling, etc.).
  3. Bore huller: Forbor huller på de markerede steder.
  4. Fastgør base: Secure the camera's mounting base to the surface using the included screws.
  5. Juster vinkel: Adjust the camera and solar panel to the desired angle. The camera offers 360° rotation and 90° tilt, while the solar panel can be adjusted 150° for optimal sun exposure.
  6. Fastgør antenne: Screw the dummy antenna onto the designated port on either side of the camera for a more realistic appearance.
Diagram showing dimensions and components of the fake security camera, including solar panel, dummy antenna, LED lights, PIR motion sensor, and red LED light.

Image: Detailed diagram illustrating the components and dimensions of the Techage fake security camera, including the solar panel, dummy antenna, LED lights, PIR motion sensor, and red LED light.

Diagram showing adjustable angles of the fake security camera: 360 degrees rotation, 90 degrees tilt, and 150 degrees solar panel adjustment.

Image: Illustration demonstrating the adjustable angles of the camera body (360° rotation, 90° tilt) and the solar panel (150° adjustment) for flexible positioning.

Installationsvideo:

Video: Udpakning og installation overståetview of the Techage Solar Powered Floodlights Dummy Camera, demonstrating its components and ease of setup.

3. Betjeningsvejledning

The Techage Fake Security Camera operates autonomously once installed and charged. Its primary functions are to deter and illuminate.

Solopladning:

  • The integrated solar panel charges the internal battery during daylight hours. Ensure the panel is positioned to receive maximum direct sunlight.
  • No manual charging or battery replacement is typically needed under normal sunlight conditions.
Image showing a person walking towards a door at night, illuminated by an 800 lumen floodlight from the fake camera.

Image: A visual representation of the 800 lumen super brightness provided by the floodlights, illuminating a path at night.

Motion-Activated Floodlights:

  • At night, the built-in PIR motion sensor detects movement within a range of 28-32 feet.
  • Upon detection, the 8 LED floodlights will automatically activate, providing 800 lumens of bright illumination for approximately 20 seconds.
  • The floodlights will turn off automatically after 20 seconds if no further motion is detected.
Three panels illustrating the camera's operation: 1. Standby Mode with constant red light. 2. PIR Detection Mode with 800LM floodlight activating. 3. Floodlight turning off after 20 seconds when motion leaves the area.

Image: A sequence of illustrations demonstrating the camera's operational modes: standby with a red light, motion detection activating the floodlight, and the floodlight turning off after a set period.

Blinkende rød LED:

  • A small red LED light on the camera will flash continuously in standby mode, simulating the recording indicator of a real camera.

Operationsdemonstration:

Video: A short demonstration of the fake camera's motion-activated floodlight turning on at night as a person approaches.

4. Vedligeholdelse

To ensure the longevity and optimal performance of your Techage Fake Security Camera, consider the following maintenance tips:

  • Rens solpanel: Tør solpanelet regelmæssigt af med en blød kludamp en klud til at fjerne støv, snavs eller affald, der kan blokere for sollys og reducere opladningseffektiviteten.
  • Undersøg montering: Regularly check the mounting screws and bracket to ensure the camera remains securely attached, especially after severe weather conditions.
  • Vejrbestandighed: The camera is IP66 waterproof and designed to withstand various weather conditions. However, extreme conditions may still impact performance.
A white fake security camera mounted outdoors, with rain falling, demonstrating its IP66 waterproof rating.

Image: The fake security camera shown in a rainy environment, highlighting its IP66 waterproof and dustproof capabilities.

5. Fejlfinding

If you encounter any issues with your fake security camera, try the following troubleshooting steps:

  • Floodlights Not Activating:
    • Ensure the camera's solar panel is receiving sufficient direct sunlight for charging. A full day of sunlight is typically needed for optimal night operation.
    • Kontroller, at bevægelsessensoren ikke er blokeret.
    • Test the motion sensor by walking within its detection range (28-32 ft) at night.
  • Red LED Not Flashing:
    • Confirm the camera has been exposed to adequate sunlight for charging.
    • Check if the power button (if present and accessible) is in the 'on' position.
  • Camera Appears Less Realistic:
    • Ensure the dummy antenna is securely attached.
    • Clean the camera lens and body to remove any dirt or grime that might diminish its realistic appearance.

Ved vedvarende problemer henvises til supportafsnittet.

6. Specifikationer

FeatureDetalje
ModelnummerSL669W
StrømkildeSolcelledrevet, batteridrevet
Lysstyrke for projektør800 Lumens (8 LED lights)
Rækkevidde for bevægelsesdetekteringOp til 32 fod
Vandtæt vurderingIP66
Driftstemperatur-20°F til 160°F
Dimensioner (L x B x H)11.4 x 8.6 x 3.9 tommer
Varens vægt1.5 pund
Felt Af View120 grader
FabrikantTinosec
UPC777647460664

7. Garanti og support

Garantioplysninger:

Specific warranty details for the Techage Solar Battery Powered Metal Fake Security Camera should be obtained directly from the manufacturer or your point of purchase. Please retain your proof of purchase for any warranty claims.

Kundesupport:

Techage offers free technical support for their products. For assistance with installation, operation, or troubleshooting, please contact Techage customer service. You may also find useful resources and FAQs on the official Techage brand store or through the VicoHome App, which is associated with Techage products.

Icon representing free technical support

Gratis teknisk support

VicoHome App icon and smartphone showing app interface

VicoHome App Support

Relaterede dokumenter - SL669W

Preview Techage Dummy-kamera med soldrevet projektør Brugermanual
Brugermanual til Techage Dummy-kameraet med soldrevet projektør, der beskriver produktets funktioner, testprocedurer, optimal installation, tekniske specifikationer og garantioplysninger.
Preview BNT Solar Dummy Security Camera User Manual
User manual for the BNT Solar Dummy Security Camera (model IR-2600SW), detailing product information, installation tips, attention points, and customer service.
Preview Swann PRO-1080MSBPK2 Termisk sensor sikkerhedskameraer | 1080p HD, nattesyn, PIR bevægelsesdetektion
Udforsk Swanns PRO-1080MSBPK2 termosensor-sikkerhedskameraer. Med 1080p HD, avanceret PIR-bevægelsesdetektion, nattesyn på 100 meter, vejrbestandigt design og nem gør-det-selv-installation for pålidelig sikkerhed i hjemmet og virksomheden.
Preview BNI IR-2300 Solar Dummy Security Camera User Manual
Comprehensive user manual for the BNI IR-2300 Solar Dummy Security Camera. Includes product details, step-by-step mounting instructions, usage tips, safety precautions, and after-sales service contact information.
Preview Surly Dummy Rails: Installation, Safety, and Warranty Guide
Comprehensive guide to Surly Dummy Rails, covering installation steps, safety guidelines, load limits, and limited warranty information for Surly bicycle cargo systems.
Preview Camzeb Fake Solar Security Camera & LED Light User Manual
User manual for the Camzeb Fake Solar Security Camera and Solar LED Light, detailing features, installation, operation, parameters, and precautions for outdoor use.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.