Kuzco Lighting LP314308VBRC

Kuzco Lighting LP314308VBRC Salita Pendant Instruction Manual

Model: LP314308VBRC

Indledning

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Kuzco Lighting LP314308VBRC Salita Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference. This pendant features a vintage brass finish with ribbed crystal shades, designed for general purpose indoor lighting.

Sikkerhedsoplysninger

  • ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved afbryderen eller sikringsboksen før installation eller service.
  • Alle elektriske forbindelser skal være i overensstemmelse med lokale forskrifter, forordninger eller National Electric Code (NEC). Kontakt en kvalificeret elektriker, hvis du ikke er bekendt med korrekt elektrisk ledningsføring.
  • Sørg for, at monteringsfladen kan bære armaturets vægt.
  • Overskrid ikke det maksimale wattage specificeret for pærerne.
  • Håndter glaskomponenter forsigtigt for at forhindre brud.
  • Denne lampe er kun beregnet til indendørs brug.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • Monteringsbeslag
  • Canopy with wiring
  • Fixture Body (Vintage Brass)
  • Ribbed Crystal Shades (8 pieces)
  • Socket Rings (8 pieces)
  • Monteringsudstyr (skruer, trådmøtrikker)
  • Instruktionsmanual

Note: Bulbs are typically not included and must be purchased separately.

Opsætning og installation

Follow these steps for proper installation of your pendant light fixture:

  1. Sluk for strømmen: Før du starter, skal du sørge for, at strømmen til samledåsen er slukket ved afbryderen eller sikringsskabet.
  2. Forbered monteringsbeslag: Fastgør monteringsbeslaget til samledåsen med de medfølgende skruer. Sørg for, at det er sikkert fastgjort.
  3. Ledningsforbindelser:
    • Tilslut grøn eller bar kobberjordledning fra armaturet til jordledning from the junction box. Secure with a wire nut.
    • Tilslut hvid (neutral) ledning fra armaturet til hvid (neutral) ledning from the junction box. Secure with a wire nut.
    • Tilslut sort (strømførende) ledning fra armaturet til sort (strømførende) ledning from the junction box. Secure with a wire nut.
    Sørg for, at alle ledningsforbindelser er tætte og sikre.
  4. Mount Canopy: Carefully push the canopy up to the ceiling, aligning the mounting screws on the bracket with the holes in the canopy. Secure the canopy in place with the decorative nuts or screws.
  5. Saml armaturhus: If the fixture body components (e.g., horizontal bar, vertical rods) are not pre-assembled, follow the diagrams provided with the physical product to connect them.
  6. Installer glasskærme: For each light socket, place a ribbed crystal shade over the socket and secure it with a socket ring. Gently tighten the socket ring to hold the shade in place without overtightening.
  7. Installer pærer: Screw the recommended bulbs (not included) into the sockets. Do not exceed the maximum wattage på 60 watt pr. pære.
  8. Gendan strøm: Når installationen er færdig, og alle komponenter er fastgjort, skal strømmen genoprettes ved afbryderen.
Kuzco Lighting LP314308VBRC Salita Pendant installed in a kitchen

Image: The Kuzco Lighting LP314308VBRC Salita Pendant, featuring a vintage brass finish and eight ribbed crystal shades, installed above a kitchen island.

Betjeningsvejledning

The Kuzco Lighting LP314308VBRC Salita Pendant operates like any standard light fixture. Once properly installed and powered, use your wall switch to turn the light on and off.

Opretholdelse

  • Rensning: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. For the glass shades, use a mild glass cleaner on a soft cloth, then wipe dry. Avoid abrasive cleaners or solvents that may damage the finish.
  • Udskiftning af pære: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching. Unscrew old bulbs and replace with new ones of the same type and wattage (maks. 60 W pr. pære).
  • Inspektion: Kontrollér regelmæssigt alle forbindelser og monteringsudstyr for at sikre, at de forbliver fastgjorte.

Fejlfinding

ProblemMulig årsagLøsning
Lyset tænder ikkeNo power to the fixture; Loose wiring; Faulty bulb; Faulty wall switchCheck circuit breaker/fuse; Verify all wire connections are secure; Replace bulb; Test wall switch (consult electrician if needed)
Lyse flimrerLoose wiring; Incorrect bulb type; Dimmer incompatibilityCheck wire connections; Ensure bulbs are fully screwed in; Use recommended dimmable bulbs if on a dimmer circuit; Consult electrician
Brummende støjIncompatible dimmer switch; Loose componentsReplace dimmer with a compatible LED dimmer (if using LED bulbs); Ensure all fixture components are tightened

Specifikationer

  • Mærke: Kuzco belysning
  • Modelnummer: LP314308VBRC
  • Voltage: 120 volt
  • Wattage: 60 watts (per light source, max)
  • Antal lyskilder: 8
  • Materiale: Bronze, Nickel, Glass
  • Slutte: Vintage Messing
  • Skyggemateriale: Glass (Ribbed Crystal)
  • Monteringstype: Fremspringende
  • Certificering: UL-listet
  • Stil: Retro
  • Strømkilde: Elektrisk med ledning

Garanti og support

Alle købte produkter har en 30-dages reservedelspolitik for at sikre en fuldt funktionel vare. Alle produkter er dækket af en 1-års garanti ved køb på Amazon. Garantiperioden begynder den dag, produktet oprindeligt afsendes. Garantien dækker alle de varer og tilstande, der er angivet i den oprindelige producentgaranti. Nogle af de varer, der specifikt ikke er dækket af garantien, er tab og tyveri, vandskader, kundemishandling og forringelse af finishen på grund af UV- eller kyststråling.

For technical support or warranty claims, please contact Kuzco Lighting customer service or your authorized retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.