VIVOTEK ND9323P H.265 8-Channel Embedded PoE NVR User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of the VIVOTEK ND9323P H.265 8-Channel Embedded PoE Network Video Recorder (NVR). Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

2. Sikkerhedsoplysninger

Observe the following safety precautions to prevent damage to the NVR and to ensure user safety:

• Strømforsyning: Use only the power adapter supplied with the NVR. Ensure the power source matches the NVR's voltage krav.
• Ventilation: Bloker ikke ventilationsåbninger. Installer NVR'en i et godt ventileret område for at forhindre overophedning.
• Miljø: Avoid exposing the NVR to water, moisture, extreme temperatures, or direct sunlight. Do not place heavy objects on the NVR.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
• Håndtering: Handle the NVR with care. Avoid dropping or subjecting it to strong impacts.

3. Pakkens indhold

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact your vendor immediately.

• VIVOTEK ND9323P NVR Unit
• Strømadapter
• USB-mus
• Hurtig installationsvejledning
• Accessory Pack (Screws for HDD installation, Ethernet cable)
• Case (referring to the NVR enclosure itself)

Figure 3.1: VIVOTEK ND9323P NVR unit. This image shows the front panel of the NVR, typically featuring status indicators and USB ports.

4. Produktet er slutview

The VIVOTEK ND9323P is an 8-channel embedded Network Video Recorder designed for IP surveillance systems. It supports H.265 video compression for efficient storage and bandwidth usage. With its integrated Power over Ethernet (PoE) ports, it simplifies camera installation by providing both power and data connectivity through a single Ethernet cable.

4.1 Nøglefunktioner

• 8-Channel Video Input
• H.265/H.264 Video Compression
• 8 x 802.3at/af PoE Ports
• Local Display Output (HDMI/VGA)
• Remote Access via VIVOTEK VIVOCloud App or VMS
• Supports up to 16TB HDD storage (HDD not included)

4.2 For- og bagpaneler

Refer to the Quick Installation Guide for detailed diagrams of the front and rear panels, indicating ports and indicators.

• Frontpanel: Power LED, HDD LED, Network LED, USB ports.
• Bagside: Power input, LAN port, PoE ports (1-8), HDMI output, VGA output, Audio I/O, USB ports.

5. Opsætning

5.1 Installation af harddisk (valgfrit)

The NVR does not typically include a pre-installed hard drive. Follow these steps to install a 3.5-inch SATA hard drive:

1. Unscrew and remove the NVR's top cover.
2. Tilslut SATA-data- og strømkablerne fra NVR'en til harddisken.
3. Fastgør harddisken til NVR-kabinettet med de medfølgende skruer.
4. Sæt topdækslet på igen, og fastgør det med skruer.

Note: Ensure the NVR is powered off and unplugged before installing or removing a hard drive.

5.2 Fysiske forbindelser

1. Tilslut kameraer: Connect your IP cameras to the NVR's PoE ports (1-8) using Ethernet cables. The NVR will provide power and network connectivity to the cameras.
2. Opret forbindelse til netværk: Connect the NVR's LAN port to your local network router or switch using an Ethernet cable.
3. Tilslut skærm: Tilslut en skærm til NVR'ens HDMI- eller VGA-udgangsport.
4. Tilslut mus: Sæt USB-musen i en af ​​NVR'ens USB-porte.
5. Tænd: Tilslut strømadapteren til NVR'ens strømindgang, og sæt den derefter i en stikkontakt. NVR'en tænder automatisk.

5.3 Indledende konfiguration

Upon first boot, the NVR will guide you through a setup wizard on the connected monitor:

1. Sprogvalg: Vælg dit foretrukne sprog.
2. Adgangskodeopsætning: Create a strong password for the administrator account. This is crucial for security.
3. Netværksindstillinger: Configure network settings (DHCP or Static IP). DHCP is recommended for most home users.
4. Tid og dato: Indstil den korrekte tidszone, dato og klokkeslæt.
5. Harddiskinitialisering: If you installed a new hard drive, the NVR will prompt you to format it. Confirm to proceed. Advarsel: Formatting will erase all data on the drive.
6. Kamerasøgning og tilføj: The NVR will automatically search for connected VIVOTEK cameras. Select and add them to the NVR.
7. Slutte: Complete the wizard to access the NVR's live view.

6. Betjening af NVR'en

6.1 Accessing the NVR

You can access and manage the NVR through various methods:

• Lokal skærm: Directly via the connected monitor and USB mouse.
• Web Browser: Enter the NVR's IP address into a web browser på en computer, der er tilsluttet det samme netværk.
• VIVOTEK VIVOCloud App: Download the mobile app for remote viewing og ledelse.
• VIVOTEK VAST 2 VMS: For advanced management and multi-NVR systems.

6.2 Live View

Live view displays real-time video feeds from all connected cameras. You can switch between single-camera view, multikameragitter view, and customize the display layout.

6.3 Optagelsesindstillinger

Configure recording schedules and modes for each camera:

• Kontinuerlig optagelse: Optagelser 24/7.
• Optagelse af bevægelsesdetektering: Optager kun, når der registreres bevægelse.
• Planlagt optagelse: Optegnelser i bestemte tidsperioder.
• Hændelsesoptagelse: Records based on external triggers or alarms.

Access these settings through the NVR's main menu: Configuration > Recording > Schedule.

6.4 Afspilning

Til review optaget footage:

1. Fra hovedmenuen skal du vælge Afspilning.
2. Choose the camera(s) and the date/time range you wish to review.
3. Use the timeline and playback controls (play, pause, fast forward, rewind) to navigate through the footage.

6.5 Event Management and Notifications

Configure the NVR to respond to events such as motion detection, camera tampering, or network disconnection. The NVR can send email notifications, trigger alarms, or start recording.

Access these settings via: Configuration > Event.

7. Vedligeholdelse

7.1 firmwareopdateringer

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware can be updated via the NVR's web interface or local display menu: Configuration > System > Firmware Upgrade.

Forsigtighed: Do not power off the NVR during a firmware upgrade. This can cause permanent damage.

7.2 Harddiskstyring

Monitor the health of your hard drive(s) and ensure sufficient storage space. The NVR will automatically overwrite the oldest recordings when the disk is full, based on your settings.

Access HDD status and settings via: Configuration > Storage > HDD Management.

7.3 Rengøring

Keep the NVR unit clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.

8. Fejlfinding

This section addresses common issues you might encounter with your VIVOTEK ND9323P NVR.

8.1 Ingen videovisning på skærmen

• Tjek kabler: Sørg for, at HDMI/VGA-kablet er korrekt tilsluttet til både NVR'en og skærmen.
• Monitorinput: Verify the monitor is set to the correct input source (HDMI/VGA).
• NVR Power: Confirm the NVR is powered on and its power LED is illuminated.

8.2 Cameras Not Showing Up / No Image

• PoE-forbindelse: Ensure cameras are properly connected to the NVR's PoE ports. Check if the PoE port LEDs on the NVR are active.
• Kamerastrøm: If not using PoE, ensure cameras are receiving power from their own power adapters.
• Netværksforbindelse: Verify the NVR and cameras are on the same network segment if not directly connected via PoE.
• Kamerastatus: Check the camera's own status indicators.
• NVR Camera Management: Gå til Configuration > Camera > Camera Management to ensure cameras are added and enabled. Try rescanning for cameras.

8.3 Cannot Access NVR via Web Browser

• IP-adresse: Confirm the NVR's IP address is correct and that your computer is on the same network.
• Netværkskabel: Ensure the NVR's LAN port is connected to your network.
• Firewall: Temporarily disable your computer's firewall to check if it's blocking access.
• Browserkompatibilitet: Use a recommended web browser (f.eks. Chrome, Firefox).

8.4 Glemt adgangskode

If you forget the administrator password, you may need to perform a factory reset. Refer to the VIVOTEK support website or contact technical support for the specific procedure for your model, as this often involves a physical reset button or a specific utility.

9. Specifikationer

The following table lists the key specifications for the VIVOTEK ND9323P NVR:

10. Garanti og support

VIVOTEK products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK webwebsted.

For technical support, product registration, or to download the latest firmware and software, please visit the VIVOTEK support portal:

VIVOTEK Official Support Webwebsted

When contacting support, please have your NVR's model number (ND9323P) and serial number ready.