1. Introduktion
This instruction manual provides essential information for the safe and efficient use of your MMOBIEL 7.4V 2S LiPo/Li-ion Battery USB Charger Cable. Designed for a wide range of remote-controlled devices, this charger ensures reliable power delivery with built-in safety features. Please read this manual thoroughly before use.
2. Produktfunktioner
- Safe & Reliable Charging: USB to XH-3P charger cable designed for 7.4V 2S LiPo and Li-ion batteries. Built-in IC chip protects from overcharge, over-voltage, og kortslutninger.
- Smart LED-indikatorer: Charging status shown clearly: green flashing/red solid = charging, both solid = fully charged, red flashing = warning.
- Effektiv effekt: Input: 5V/2A via USB; Output: 7.4V/1000mA. Charges batteries under 1500mAh in approximately 4 hours. Ideal for daily charging needs.
- Bred kompatibilitet: Works with RC drones, boats, Skytech H100–H106, WLtoys, Sgile robots, gel blasters, quadcopters, and other RC electronics.
- Durable 2-Pack Design: Includes 2 charger cables, each 2ft long (60cm). Compact and rugged build makes them ideal for both home use and travel.
- Perfect for RC Hobbyists & DIY Projects: Essential accessory for drone pilots, RC users, robotics builders, and electronics tinkerers. Convenient, portable, and dependable.
3. Specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | MMOBIEL |
| Modelnummer | DJI |
| Input bindtage | 5 volt (DC) |
| Udgang Voltage | 7.4 volt (DC) |
| Udgangsstrøm | 1000mA (1A) |
| Connector Type | XH-3P |
| Kabellængde | 2 fod (60 cm) |
| Varens vægt | 0.95 ounce |
| Farve | Sort |
| Sikkerhedscertificeringer | CE, RoHS |
4. Opsætning og tilslutning
To begin charging your 7.4V 2S LiPo or Li-ion battery, follow these steps:
- Tilslut til strømkilde: Insert the USB-A end of the charger cable into a compatible 5V/2A USB power source (e.g., USB wall adapter, power bank, laptop USB port).
- Observer LED-indikator: Before connecting the battery, the charger's LED indicator will typically show a red solid light, indicating it is powered on but no battery is connected.
- Tilslut batteri: Carefully connect your 7.4V 2S LiPo or Li-ion battery (with XH-3P connector) to the XH-3P plug on the charger cable. Ensure the polarity is correct to avoid damage.
5. Operating Instructions (LED Indicators)
The charger features a smart LED indicator to communicate the charging status:
- Rødt fast lys: The charger is powered on, but no battery is connected.
- Green Flashing / Red Solid Light: Batteriet oplades i øjeblikket.
- Both Lights Solid (Green & Red): The battery is fully charged. Disconnect the battery from the charger.
- Rødt blinkende lys: Indicates a warning or error condition. Disconnect the battery and power source immediately and check connections.
Video: Demonstrates the charging process and LED indicator behavior for a 7.4V USB Charger Cable with XH-3Pin connector.
6. Kompatibilitet
This charger is compatible with 7.4V 2S LiPo and Li-ion batteries featuring an XH-3P connector. It is suitable for various remote-controlled devices, including but not limited to:
- RC droner
- RC Quadcopters
- RC både
- RC Cars (e.g., WLtoys models)
- Skytech H100–H106 series
- Sgile Robots
- Gel Splatter Blasters
Video: A detailed demonstration of the 7.4V 1A USB Charger Cable for 7.4V 2S LiPo and Li-ion batteries, showcasindens funktioner og anvendelse.
Video: An instructional video demonstrating the Blomiky 7.4V 2S 1A Lithium USB Charger Cable with XH-3P plug.
7. Sikkerhedsretningslinjer
For at sikre sikker drift og forlænge levetiden for din opladere og dine batterier, bedes du følge følgende sikkerhedsretningslinjer:
- Use only with compatible 7.4V 2S LiPo or Li-ion batteries with XH-3P connectors.
- Do not attempt to charge batteries with different voltage or connector types.
- Always connect the charger to the power source first, then the battery. Disconnect the battery first, then the power source.
- Efterlad aldrig opladningsbatterier uden opsyn.
- Charge batteries on a non-flammable surface, away from flammable materials.
- If the battery becomes hot, swells, or shows any signs of damage during charging, disconnect it immediately and discontinue use.
- Keep the charger and batteries away from water, moisture, and extreme temperatures.
- Opladeren må ikke skilles ad eller modificeres.
- Opbevares utilgængeligt for børn.
8. Fejlfinding
- Charger LED not lighting up: Ensure the USB-A plug is fully inserted into a working 5V/2A USB power source. Try a different USB port or power adapter.
- Battery not charging (Red light solid, Green light off): Verify that the XH-3P connector is securely attached to the battery. Ensure the battery is a compatible 7.4V 2S LiPo/Li-ion type.
- Red light flashing (Warning): Disconnect the battery and power source immediately. Check for any visible damage to the battery or charger cable. Ensure correct polarity. If the issue persists, discontinue use.
- Langsom opladning: Ensure your USB power source provides at least 5V/2A output. Lower amperage power sources will result in slower charging times. Batteries with capacities significantly larger than 1500mAh may take longer than 4 hours.
9. Garanti og support
MMOBIEL products are designed for quality and reliability. For any questions, technical support, or warranty inquiries, please contact MMOBIEL customer service through the retailer's platform where the product was purchased. Please retain your proof of purchase for warranty claims.