Temank Growatt 5000W SPF 5000ES Solar Inverter User Manual

1. Produktet er slutview

The Temank Growatt 5000W SPF 5000ES Solar Inverter is an all-in-one hybrid power solution designed for off-grid applications. It converts 48V DC power to 220V AC (single phase) and features a built-in 100A MPPT solar charge controller. This inverter is compatible with various battery types, including lead-acid and lithium, and can also operate without a battery. It supports parallel operation for capacity expansion up to 30kW, allowing up to 6 units to work together, including support for three-phase equipment when batteries are connected.

Key functionalities include flexible scheduling for inverter charging and discharging, and compatibility with both mains voltage and generator power. Optional WiFi/GPRS remote monitoring is available for real-time system status updates via mobile or web.

Figure 1.1: System Diagram of the Growatt SPF 5000ES Inverter.

2. Produktfunktioner

• Pure Sine Wave Output: Giver stabil og ren strøm, der er egnet til følsom elektronik.
• Integreret MPPT-controller: Built-in 100A MPPT solar charge controller maximizes solar power harvesting.
• Høj PV-indgang: Supports a maximum PV power of 6000W and a maximum PV input VOC of 450V DC.
• Batterikompatibilitet: Works with 48V lead-acid, lithium, and user-defined battery types, or can operate without a battery.
• Parallel drift: Expandable up to 30kW by connecting up to 6 units in parallel, supporting single-phase or three-phase loads (with battery).
• Fleksible opladningstilstande: Three optional charging modes: Solar First, Solar and Utility, or Only Solar.
• Udgangsprioritetstilstande: Four available output modes: Solar First, Utility First, SBU Priority, and SUB Priority.
• Kommunikationsporte: Equipped with WIFI/GPRS, USB, CAN, and RS485 communication ports for monitoring and control.
• Omfattende beskyttelse: Inkluderer lavvolumentage, overheat, short circuit, overload, over current, and auto frequency range protection.

Figure 2.1: Growatt 5000W Solar Hybrid Inverter Features.

3. Udpakning og inspektion

Upon receiving your Growatt SPF 5000ES Solar Inverter, carefully unpack the unit and inspect its contents. Ensure all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

3.1. Pakkens indhold

Standardpakken indeholder:

• Growatt SPF 5000ES Inverter
• MPPT Controller (integrated)
• Brugermanual/Installationsvejledning
• Parallel kommunikationskabel
• Current Sharing Cable
• USB kommunikationskabel
• Software CD

Figure 3.1: Growatt SPF 5000ES Inverter Package Contents.

3.2. Unpacking Video Guide

Video 3.1: Unpacking and inspecting the Growatt SPF 5000ES inverter. This segment demonstrates how to safely open the packaging and verify the included components.

4. Appearance and Ports

Familiarize yourself with the inverter's external components and connection ports before installation.

4.1. Beskrivelse af frontpanelet

Figure 4.1: Front Panel of the Growatt SPF 5000ES Inverter.

• Statusindikator: Displays the operational status of the inverter.
• Fejlindikator: Illuminates to indicate a system fault or error.
• Opladningsindikator: Viser batteriets opladningsstatus.
• LCD skærm: Provides real-time system information and allows for configuration.
• Funktionsknapper: Bruges til at navigere i menuer og justere indstillinger.

4.2. Rear Panel and Connection Ports

Figure 4.2: Rear Panel and Connection Ports.

• AC-indgangsport: For connecting to the utility grid or a generator.
• WIFI/GPRS Communication Port: For optional remote monitoring modules.
• USB-kommunikationsport: For local monitoring and firmware updates.
• Tør kontakt port: Til eksterne styresignaler.
• PV-indgangsport: For connecting solar panel arrays.
• CAN Communication Port: For parallel communication between inverters.
• RS485 kommunikationsport: Til eksterne kommunikationsenheder.
• Tænd/sluk-knap: Hovedstrømstyring for inverteren.
• Battery Input Port: Til tilslutning til batteribanken.
• Parallel Communication Port: Til parallelforbindelse af flere invertere.
• Current Sharing Port: Til strømbalancering i parallelle systemer.
• AC udgangsport: For connecting to household loads.
• Afbryder: Provides overcurrent protection for the AC output.

5. Installationsvejledning

Proper installation is crucial for the safe and efficient operation of your Growatt inverter. Please follow these guidelines carefully.

5.1. Sikkerhedsforanstaltninger

• Monter ikke inverteren på brændbare byggematerialer.
• Ensure the mounting surface is solid and can support the inverter's weight.
• Install the inverter at eye level to easily read the LCD display.
• Omgivelsestemperaturen bør være mellem 0°C og 55°C for optimal drift.

Figure 5.1: Do not mount on flammable materials.

Figure 5.2: Mount on a solid surface.

5.2. Mounting Position and Clearance

The recommended installation position is to adhere the inverter to the wall vertically. Ensure sufficient clearance around the unit for proper heat dissipation and ease of wiring.

• Maintain at least 20 cm clearance on the sides.
• Maintain at least 50 cm clearance above and below the unit.

Figure 5.3: Recommended Installation Clearances.

5.3. Installationsvideoguide

Video 5.1: Installation presentation for the Growatt SPF 5000ES inverter, covering tools, safety, mounting, and clearances.

6. Ledningsforbindelser

All wiring should be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure all power sources are disconnected before making any connections.

6.1. Batteritilslutning

Connect the 48V battery bank to the Battery Input Port. Use 2AWG size cables for optimal performance. Ensure correct polarity (+ to + and - to -).

Figure 6.1: Battery Input Port.

6.2. AC Input Connection

Connect the utility grid or generator to the AC Input Port. Use 8AWG size cables. The inverter is designed for 220V AC single-phase input.

Figure 6.2: AC Input Port.

6.3. AC-udgangstilslutning

Connect your household loads to the AC Output Port. Use 8AWG size cables. The inverter provides 220V AC single-phase output.

Figure 6.3: AC Output Port.

6.4. Tilslutning af PV-indgang

Connect your solar panel array to the PV Input Port. Ensure the maximum PV input voltage (VOC) does not exceed 450V DC and the maximum input current is 18A. Use 10-12AWG PV wires.

Figure 6.4: PV Input Port.

6.5. Communication Module Installation

For remote monitoring, install the optional WIFI-F or GPRS-F communication module into the designated port.

Figure 6.5: Installing the WIFI-F Communication Module.

6.6. Wiring Connection Video Guide

Video 6.1: Detailed guide on connecting battery, AC input, AC output, and PV input cables to the Growatt SPF 5000ES inverter.

7. Betjening og indstillinger

This section covers basic operation and how to configure key settings using the LCD display and function buttons.

7.1. Tænd/sluk

To power on the inverter, ensure all connections are secure, then switch the Power On/Off switch to the 'ON' position.

Figure 7.1: Powering On the Inverter.

7.2. LCD Display Navigation

Use the 'ESC', 'UP', 'DOWN', and 'ENTER' buttons to navigate through the LCD display menus and adjust settings.

Figure 7.2: LCD Display and Navigation Buttons.

7.3. Key Programmable Settings

The inverter offers several programmable settings to optimize its operation for your specific setup.

• Program 01: Output Source Priority
  This setting defines the priority of power sources for your loads. Options include: Solar First (SOL), Utility First (UEI), SBU Priority (SBU), and SUB Priority (SUB).


Figure 7.3: Output Source Priority (Solar First).

• Program 05: Battery Type
  Select the type of battery connected to the inverter. Options typically include Flooded (FLD), AGM, User-defined (USE), and Lithium (LI). For lithium batteries, consult the compatibility list and set the communication protocol.


Figure 7.4: Battery Type Selection.

• Program 14: Charger Source Priority
  This setting defines the priority of charging sources for the battery. Options include: Solar First (CSO), Grid First (CUE), Solar and Grid (SNU), and Only Solar (OSO).


Figure 7.5: Charger Source Priority Modes.

• Program 19: Volumen for masseopladningtage (CV Voltage)
  Adjust the bulk charging voltage for user-defined battery types, typically ranging from 48V to 58.4V.
• Program 20: Flydende opladningsvolumentage
  Adjust the floating charging voltage for user-defined battery types, typically ranging from 48V to 58.4V.
• Program 21: Lav DC-afskæringsvolumentage
  Set the low DC cut-off voltage for user-defined battery types, typically ranging from 40V to 48V.
• Program 23: AC Output Mode (Parallel Operation)
  For parallel systems, select 'PAL' for single-phase parallel operation. For three-phase parallel operation, select '3P1' for L1 phase, '3P2' for L2 phase, and '3P3' for L3 phase.

7.4. Operation and Settings Video Guide

Video 7.1: Demonstration of navigating the LCD display and configuring various operational settings on the Growatt SPF 5000ES inverter.

8. Fejlfinding

This section provides common problems, their explanations, and recommended solutions. For more detailed troubleshooting, refer to the full user manual.

Figure 8.1: Troubleshooting Guide.

8.1. Troubleshooting Video Guide

Video 8.1: Overståetview of common troubleshooting steps and fault codes for the Growatt SPF 5000ES inverter.

9. Tekniske specifikationer

10. Garanti og support

For detailed warranty information, technical support, and service inquiries, please refer to the official documentation provided with your product or contact Temank Growatt customer service directly. Keep your purchase receipt for warranty claims.