PowMr 5000W solcelle-inverter brugermanual

Produkt overview

The Temank PowMr 5000W Solar Inverter is a pure sine wave power inverter designed for off-grid solar energy systems. It features a built-in 80A MPPT controller and supports both 48V lead-acid and lithium batteries. This versatile inverter integrates solar energy storage, AC charging, and pure sine wave output functions, offering high reliability and fast response speed.

Figure 1: PowMr 5000W Solar Inverter, a pure sine wave power inverter with built-in 80A MPPT controller.

Figure 2: Key features of the PowMr 5000W Off-Grid Solar Inverter, including 5KW AC output power, 40A Max AC Charging, 80A Max Hybrid Charging Current, and 150V Starting Voltage.

Opsætning og installation

1. Udpakning af inverteren

Når du åbner pakken, vil du finde følgende komponenter:

• PowMr 5000W solcelle-inverter
• Installationsmanual
• Installationsvejledningskort
• Garantikort
• Two Battery Terminals
• Two Battery Terminal Screws
• Four Spare Screws

Figure 3: Contents of the PowMr Solar Inverter package, including the inverter unit, manuals, and connection accessories.

For a visual guide on unboxing and initial setup, refer to the official installation video below.

2. Montering af inverteren

Ensure the installation environment is dry, temperature-appropriate, and well-ventilated. Maintain a minimum gap of 20cm on both sides of the inverter and 50cm at the top and bottom to ensure adequate air circulation and heat dissipation.

Figur 4: Bagside view of the PowMr Solar Inverter showing the mounting holes and cooling fans. Proper spacing is crucial for optimal performance.

The inverter can be fixed to a wall using recommended M5 screws. Alternatively, for temporary setups or specific mounting panels, zip ties can be used for securing the unit.

3. Wiring Preparation

Before starting the wiring process, prepare the following cables and circuit breakers according to the specifications:

• Batterikabler: Two 2AWG wires (one red for positive, one black for negative).
• AC Input/Output Cables: Three 10AWG wires for AC input (Live, Neutral, Ground) and two 10AWG wires for AC output (Live, Neutral).
• PV Input Cables: Two 12AWG wires (one red for positive, one black for negative).
• Jordingskabel: One 11AWG wire for grounding the device.

It is highly recommended to use different colored wires for positive, negative, neutral, live, and grounding connections to prevent reverse connection and other potential errors.

Figure 5: Detailed wiring diagram for the PowMr Solar Inverter, illustrating connections for generator, utility, solar panels, battery, and AC output loads.

Ensure you have the following circuit breakers:

• Two DC circuit breakers (rated at 25A and 160A)
• Two AC circuit breakers (rated at 40A)

4. Tilslutning af kablerne

Follow these steps to connect the cables:

1. Batterikabler: Remove the port cover by unscrewing the two screws. Connect the positive battery cable to the positive terminal and the negative battery cable to the negative terminal. Ensure a firm and secure connection.
2. PV Input Cables: Connect the solar panel cables to the PV input terminals.
3. AC Input/Output Cables: Connect the AC input cables (Live, Neutral, Ground) to the AC IN terminals and the AC output cables (Live, Neutral) to the AC OUT terminals.
4. Jording: Properly ground the inverter using the grounding port on the unit. Keep the grounding point as close as possible to the inverter for maximum effectiveness.

After completing all wiring steps, double-check all connections for any reversals and ensure they are firmly and securely connected. Once verified, reattach the bottom cover of the inverter using the provided screws.

5. Tænder

After all connections are secure, close the circuit breaker at the battery terminal, then close the circuit breakers at both the PV input and AC input terminals. Lastly, close the circuit breaker at the AC output terminal. Finally, flip the boat-shaped switch located at the bottom of the inverter to the "ON" position to power it on.

If both indicator lights (AC/INV and Charge) continue to flash normally, and the fault indicator light remains inactive, it indicates that the inverter has successfully entered its normal operating state.

Betjeningsvejledning

Once the inverter is running normally, you can access the system running status and real-time data via the LCD screen. You can also make related settings through the buttons (SET, UP, DOWN, ENT).

Figure 6: The LCD display and LED indicators of the PowMr Solar Inverter, providing dynamic system data and operating status.

For detailed configuration of the inverter parameters through the LCD screen, refer to the comprehensive tutorial video below:

Nøgleindstillinger inkluderer:

• Output Source Priority (Setting 01): Defines the power source priority for the load (Utility, Solar-Battery-Utility, Solar).
• Output Frequency (Setting 02): Adjusts the output frequency (50Hz/60Hz).
• AC -indgang Voltage Range (Setting 03): Sets the acceptable AC input voltage range (UPS mode for narrow range, APL mode for wide range).
• Battery Power to Utility Setpoint (Setting 04): Voltage at which the inverter switches from battery power to utility power.
• Utility to Battery Power Setpoint (Setting 05): Voltage at which the inverter switches from utility power back to battery power.
• Charger Source Priority (Setting 06): Determines the priority of charging sources (Solar-Utility-Battery, Only Solar, Solar-Utility).
• Max Charger Current (PV+AC) (Setting 07): Sets the maximum combined charging current from PV and AC sources.
• Battery Type (Setting 08): Configures the battery type (e.g., Sealed Lead Acid, GEL, Flooded, Lithium, User-defined).
• Battery Boost Charge Voltage (indstilling 09): Indstiller voltage for boost charging.
• Duration of Boost Charge (Setting 10): Sets the duration for boost charging.
• Floating Charge Voltage (indstilling 11): Indstiller voltage for float charging.
• Battery Over-Discharge Voltage (indstilling 12): Indstiller voltage at which the battery is considered over-discharged.
• Battery Over-Discharge Delay Time (Setting 13): Sets the delay time before shutdown due to over-discharge.
• Batteri Under-Voltage Alarm (Setting 14): Indstiller voltage for the under-voltage alarm.
• Batteriafladningsgrænse Voltage (indstilling 15): Indstiller voltage at which the inverter immediately shuts down due to low battery.
• Battery Equalization (Setting 16-21): Settings for battery equalization voltage, duration, extension, and frequency.
• Power-Saving Mode (Setting 22): Enables or disables power-saving mode.
• Restart When Overload (Setting 23): Enables automatic restart after an overload event.
• Restart When Over Temperature (Setting 24): Enables automatic restart after an over-temperature event.
• Alarm Function (Setting 25): Enables or disables the buzzer alarm.
• Beeps While Primary Source is Interrupted (Setting 26): Configures beeping behavior when the primary power source is interrupted.
• Bypass Output When Overload (Setting 27): Determines if bypass mode is enabled when overloaded.
• Max AC Charger Current (Setting 28): Sets the maximum AC charging current.
• Communication Address (Setting 30): Configures the communication address for host computer connection.
• Max PV Charger Current (Setting 36): Sets the maximum PV charging current.
• Battery Fully Charged Recovery Point (Setting 37): Threshold for battery to re-enter charging cycle.
• AC Output Voltage Setting (Setting 38): Sets the nominal AC output voltage.
• Stop Charging Current (Setting 57): Sets the current value for stopping the charge.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your PowMr Solar Inverter. It is recommended to:

• Hold inverteren ren og fri for støv og snavs.
• Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.
• Kontrollér regelmæssigt alle ledningsforbindelser for tæthed og tegn på slid eller korrosion.
• Monitor the LCD display for any unusual readings or fault indicators.

Fejlfinding

If the inverter is not functioning as expected, refer to the following general troubleshooting steps:

1. Kontroller indikatorlamper: Observe the AC/INV, Charge, and Fault indicator lights on the LCD display. A flashing AC/INV light indicates normal operation. A solid Fault light indicates an error.
2. Bekræft forbindelser: Ensure all battery, PV, and AC connections are secure and correctly wired.
3. Tjek maksimalafbrydere: Confirm that all associated circuit breakers are in the "ON" position.
4. Review Indstillinger: Access the LCD display settings (refer to Operating Instructions) to ensure all parameters are configured correctly for your system.
5. Se manualen: For specific error codes or persistent issues, refer to the detailed troubleshooting section in the complete User Manual (PDF).

Specifikationer

The following table outlines the key technical specifications for the PowMr 5000W Solar Inverter:

Figure 7: Detailed technical specifications for the PowMr Solar Inverter, including electrical parameters and physical dimensions.

Garanti og support

For detailed warranty information and customer support, please refer to the official product documentation or contact Temank customer service directly.

En omfattende brugermanual i PDF-format kan downloades: Brugervejledning (PDF)

Der findes også beskyttelsesplaner for udvidet dækning:

• 2-årig beskyttelsesplan
• 3-årig beskyttelsesplan
• Komplet beskyttelse (månedlig fornyelse)

For further assistance, visit the official Temank Store on Amazon: Temank Store