MARK ADLER Manager 2.0 Office Chair Instruction Manual

1. Introduktion

Thank you for choosing the MARK ADLER Manager 2.0 Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: The MARK ADLER Manager 2.0 Office Chair in black, showcasing its mesh backrest, padded seat, and adjustable features.

2. Sikkerhedsoplysninger

For at sikre sikker drift og forhindre personskade eller beskadigelse, bedes du overholde følgende sikkerhedsretningslinjer:

• Saml altid stolen i henhold til de medfølgende instruktioner.
• Stå ikke på stolen.
• Do not use the chair if any parts are missing or damaged.
• Keep children away from the chair during assembly. Small parts may pose a choking hazard.
• Ensure all screws and bolts are tightened securely before use. Re-tighten periodically.
• Do not exceed the maximum weight capacity (consult product packaging if available).
• Use the chair on a level surface.

3. Pakkens indhold

Før montering skal du kontrollere, at alle komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.

Typiske komponenter omfatter:

• Backrest with headrest
• Sædehynde
• Armlæn (2)
• Gasløftecylinder
• Stjernebase
• Hjul (5)
• Mechanism (tilt/height control)
• Hardware (skruer, skiver, unbrakonøgle)

4. Monteringsvejledning

Follow these steps to assemble your MARK ADLER Manager 2.0 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Fastgør hjul til basen: Insert the five caster wheels into the holes at the end of each leg of the star base until they click securely into place.
2. Indsæt gasløft: Placer gasløftecylinderen i centerhullet på stjernebasen.
3. Fastgør mekanismen til sædet: Align the mechanism with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws.
4. Fastgør armlæn til sæde: Attach the armrests to the sides of the seat cushion using the provided screws. Do not overtighten initially.
5. Fastgør ryglæn til sæde/armlæn: Connect the backrest to the seat and/or armrests using the designated screws. Once all connections are made, tighten all screws securely.
6. Tilslut sædeenheden til gasliften: Placer forsigtigt det samlede sæde på gasløftecylinderen, og sørg for, at det er centreret og stabilt.

Billede 4.1: Forside og side view diagrams illustrating the dimensions of the assembled chair, including height, width, and depth measurements.

5. Betjeningsvejledning

Your MARK ADLER Manager 2.0 Office Chair features several adjustable components designed for ergonomic comfort.

5.1. Sædehøjdejustering

For at justere sædehøjden skal du finde grebet på højre side under sædet. Mens du sidder, skal du trække grebet op for at sænke sædet. For at hæve sædet skal du rejse dig lidt op og trække grebet op. Slip grebet ved den ønskede højde.

5.2. Tilt Mechanism and Lock

The chair features a TILT PLUS mechanism. To recline the backrest, pull the lever on the left side (or the same lever as height, depending on model) outwards. Lean back to the desired angle. To lock the recline position, push the lever inwards. To unlock and return to an upright position, pull the lever outwards again and lean forward slightly.

Image 5.1: Illustration demonstrating the chair's recline function up to 140 degrees and vertical height adjustment.

5.3. Justering af hovedstøtte

The headrest can be adjusted vertically to support your neck and head. Gently push or pull the headrest up or down to find your optimal position.

Image 5.2: Detail showing the vertical adjustment capability of the mesh headrest, indicated by up and down arrows.

5.4. Justering af lændestøtte

The chair features adjustable lumbar support to provide comfort to your lower back. Locate the lumbar support mechanism on the backrest and adjust it vertically to align with the natural curve of your spine.

Image 5.3: Detail illustrating the vertical adjustment of the lumbar support system on the chair's mesh backrest.

5.5. Armlæn

The armrests are designed for comfort and support. While not explicitly stated as adjustable in the product details, they are ergonomically shaped.

Billede 5.4: Et nærbillede view of the chair's fixed, ergonomically shaped armrest.

5.6. Svinghjul

The chair is equipped with durable caster wheels for smooth movement across various floor surfaces.

Image 5.5: Detail of the chair's five-star base with smooth-rolling caster wheels.

6. Vedligeholdelse

Regular maintenance will prolong the life and appearance of your office chair.

• Rensning: Rengør stolen med adamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige materialet.
• Inspektion: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Spænd efter behov.
• Flytning: When moving the chair, lift it rather than dragging it to prevent damage to the base or floor.

7. Fejlfinding

Hvis du støder på problemer med din stol, kan du se følgende almindelige problemer og løsninger:

8. Specifikationer

9. Garanti og support

Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact the retailer or MARK ADLER customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the contact information provided with your purchase or visit the official MARK ADLER webwebsted.