IROAD NX7 Dash Cam brugermanual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• IROAD NX7 Main Unit (Front Camera)
• Bagkamera
• Tilslutningskabel til bagkamera
• OBD-II Power Cable (for general and hybrid vehicles)
• 16 GB MicroSD-kort
• Brugervejledning (dette dokument)
• Selvklæbende monteringer
• Ladekabel
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Produkt overview

Gør dig bekendt med komponenterne og deres funktioner.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Forreste kameraobjektiv: Optager view through the front windshield.
• Sikkerheds-LED: Indicates recording status and acts as a security deterrent.
• Drifts-LED: Shows the device's operational status.
• 3-inch Touch Panel Display: For viewi live footage, playback, and accessing settings.
• MicroSD -kortplads: Insert the provided MicroSD card for video storage.
• Afbryderen: For at tænde eller slukke for enheden.
• DC-IN strømterminal: Tilsluttes strømkablet.
• GPS-terminal: Connects to the optional GPS antenna for location and speed data.
• Terminal for bagkamera: Tilslutter kablet til bagkameraet.

Bagkamera

• Bagkameraobjektiv: Optager view through the rear windshield.
• Drifts-LED: Indicates the rear camera's operational status.

Opsætning

1. Indsættelse af microSD-kort

1. Sørg for, at dashcam'et er slukket.
2. Find MicroSD-kortstikket på siden af ​​hovedenheden.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Montering af bakkamera

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Locate your vehicle's OBD-II port (usually under the dashboard on the driver's side).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Før strømkablet pænt for at undgå interferens med kørebetjeningen.

5. GPS-antennetilslutning (valgfrit)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Monter GPS-antennen på et sted med frit view af himlen, typisk på instrumentbrættet eller i nærheden af ​​forruden.

Betjeningsvejledning

Tænd/sluk

• Tænd: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Sluk: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Optagelsestilstande

The IROAD NX7 supports various recording modes:

• Kontinuerlig optagelse: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Hændelsesoptagelse (påvirkningsoptagelse): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage as an event file, hvilket forhindrer den i at blive overskrevet.
• Parking Surveillance (24-hour Recording):
  • Bevægelsesdetektion: Records automatically when motion is detected around the vehicle while parked.
  • Optagelse af påvirkning: Registrerer, når der registreres et sammenstød under parkering.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Berøringspanelbetjening

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewi optagelser

• På enheden: Access the playback menu on the touch screen to view recorded videos directly.
• På en computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webwebsted) til view og administrere optagelser.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Opretholdelse

Administration af MicroSD-kort

• Almindelig formatering: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Vieweh software.
• Kortets levetid: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Rengøring af enheden

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Do not use abrasive cleaners or solvents, as they may damage the device.
• Ensure the lenses are clean and free of smudges for clear video quality.

Fejlfinding

Specifikationer

Garanti og support

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.