1. Produktet er slutview
This product provides a pack of six (6) replacement T-Joint pins designed for specific Coleman Swim Vista and Bestway Power Steel Deluxe above-ground swimming pools. These pins are essential components for maintaining the structural integrity of your pool's metal frame, ensuring secure connections at the T-joints. Each pin includes a gasket for a proper fit and seal.
Image 1: A pack of six brown replacement T-joint pins, showing their full length and design, ready for installation.
2. Produktindhold
- 6 x Replacement T-Joint Pins (Brown)
- 6 x Pin Gaskets (Pre-attached or included with each pin)
3. Kompatibilitet
These replacement pins are specifically designed for:
- Coleman Power Steel Pool 18 ft x 48 in (Round)
- Bestway Power Steel Deluxe Pools (Verify dimensions for exact fit)
Please verify your pool's model and dimensions to ensure proper fitment before installation. The pins measure approximately 3 1/8 inches (7.94 cm) in length and 3/8 inches (0.95 cm) in width.
4. Opsætning og installation
Follow these steps to replace a damaged or missing T-Joint pin:
- Sikkerhed først: Ensure the pool area is clear. If the pin to be replaced is under water, it may be necessary to partially drain the pool to access the T-joint safely and prevent water spillage.
- Identify the T-Joint: Locate the T-joint on the pool frame where the horizontal top rail connects to the vertical leg. The pin secures these two components.
- Remove Old Pin: Carefully push or pull out the old, damaged, or broken pin from the T-joint. If the pin is stuck, gently wiggle it while pulling. Avoid excessive force that could damage the pool frame.
- Prepare New Pin: Ensure the new replacement pin has its gasket properly seated around the base, just below the head of the pin. This gasket helps create a snug fit and prevents water ingress.
- Indsæt ny pinkode: Align the new pin with the holes in the T-joint and the frame components. Gently push the pin through until it is fully seated and the gasket is flush against the joint. You may hear a slight click as it locks into place.
- Bekræft sikkerhed: Once inserted, gently tug on the connected frame parts to ensure the pin is securely in place and the joint is stable.
Billede 2: Et nærbillede view of the pin's head and the integrated gasket, which ensures a secure and tight fit within the pool frame's T-joint.
Billede 3: En detaljeret view of the slotted end of the pin, designed for easy insertion and secure locking within the pool frame's T-joint.
5. Vedligeholdelse
To prolong the life of your pool frame and its components, including these pins:
- Regelmæssig inspektion: Periodically inspect all T-joints and pins for signs of wear, cracking, or damage, especially before and during the swimming season.
- Renhed: Keep the pool frame and joints free from dirt, debris, and chemical residue that could degrade the plastic over time.
- Korrekt opbevaring: If disassembling the pool for off-season storage, ensure pins are removed carefully, cleaned, and stored in a dry, protected environment away from extreme temperatures and direct sunlight.
6. Fejlfinding
- Stiften passer ikke:
- Double-check your pool model and dimensions against the compatibility information in Section 3. These pins are specific to certain Coleman/Bestway Power Steel models.
- Ensure there is no debris or obstruction in the T-joint holes.
- Pin Breaks Easily:
- Inspect the T-joint itself for any deformities or damage that might be putting undue stress on the pin.
- Ensure the pool frame is assembled on a level surface to prevent uneven stress distribution.
- Avoid excessive force during installation.
7. Specifikationer
| Attribut | Værdi |
|---|---|
| Produktdimensioner | 3.18 x 0.38 x 0.38 inches (approx. 7.94 cm L x 0.95 cm W) |
| Varens vægt (pr. pakke) | 4 ounce (ca. 113 gram) |
| Mængde | 6 pins per pack |
| Farve | Brun |
| Fabrikant | Generisk |
| Oprindelsesland | Kina |
8. Garanti og support
As this product is a replacement part from a generic manufacturer, specific warranty information may not be provided. For any issues or questions regarding the product, please refer to the seller or retailer from whom the purchase was made. Always ensure you are purchasing genuine or compatible replacement parts for your pool model.
