ColorKey TrussPar Quad 3 GO User Manual

Indledning

The ColorKey TrussPar Quad 3 GO is a battery-powered LED lighting fixture designed for professional stage and event lighting. Its compact, triangular design allows for versatile placement, including fitting inside truss legs for uplighting effects. This manual provides detailed instructions for setup, operation, and maintenance of your TrussPar Quad 3 GO.

Billede: Forside view of the ColorKey TrussPar Quad 3 GO, showcasing the digital display and control buttons.

Hvad er der i æsken

• TrussPar Quad 3 GO Light Fixture
• IR fjernbetjening
• Strømkabler

Nøglefunktioner

• Battery-powered LED tri-par truss warming fixture.
• Up to 15 hours of battery life on a single color, or 6 hours with all colors.
• Equipped with 3x10W 4-in-1 RGBW LEDs (Red, Green, Blue, White).
• Features a 16° beam angle for focused lighting.
• Supports 5 or 9 DMX channels for advanced control.
• Control options include DMX 512, Master/Slave, Auto, and Sound to Dimmer Mode.
• Includes an IR Remote for convenient operation.
• Integrated digital dimmer and strobe effects.

Produktkomponenter

Frontpanel

Billede: Forside view of the fixture, showing the LED display and navigation buttons (MENU, UP, DN, ENTER) for accessing settings and modes.

• LED display: Viser aktuel tilstand, DMX-adresse og andre indstillinger.
• Kontrolknapper: MENU, UP, DN, ENTER for navigating and selecting options.

Bagpanel

Billede: Bagside view of the fixture, highlighting the Power In, Power Out, Power switch, Charge switch, and Battery switch.

• STRØM IND: IEC power input for connecting to mains power.
• Sluk: IEC power output for daisy-chaining power to other fixtures.
• Afbryderen: Tænder eller slukker for enheden.
• CHARGE Switch: Activates or deactivates battery charging.
• BATTERY Switch: Engages or disengages battery power.

Sidepanel

Billede: Side view of the fixture, showing the 3-pin DMX In and DMX Out connectors for DMX control.

• DMX IN: 3-pin XLR input for DMX signal.
• DMX UD: 3-pin XLR output for daisy-chaining DMX signal to other fixtures.

Truss Placement

Image: The triangular fixture positioned inside a metal truss, demonstrating its intended use for uplighting within stage structures.

Opsætningsinstruktioner

1. Udpakning: Carefully remove the fixture and all accessories from the packaging. Inspect for any damage.
2. Strømtilslutning:
   • For continuous operation or charging, connect the supplied power cable to the POWER IN port and a suitable AC power outlet (AC100-240V; 50-60Hz).
   • Ensure the POWER switch is in the "ON" position.
   • To charge the battery, ensure the CHARGE switch is in the "ON" position. The fixture can be charged while in use.
3. Batteridrift: To operate solely on battery power, ensure the BATTERY switch is in the "ON" position and the power cable is disconnected or the POWER switch is off.
4. Montering: The triangular design allows for placement inside truss legs. Use the 10mm thread for C-clamp mounting if desired. Ensure the fixture is securely mounted to prevent accidental falls.
5. Første gang tændt: Once connected to power or using battery, turn on the POWER switch. The LED display will illuminate.

Driftstilstande

The TrussPar Quad 3 GO offers several operating modes, accessible via the on-board menu display or the included IR remote.

1. Manual Control (On-board Menu)

Use the MENU, UP, DN, and ENTER buttons to navigate through the display options. You can adjust settings such as DMX address, operating mode, color mixing, and strobe speed.

Image: The LED display of the fixture, showing menu options for configuration.

2. IR fjernbetjening

The included IR remote provides convenient wireless control for basic functions and color selection without DMX. Point the remote directly at the IR sensor on the fixture.

Billede: En eksample of an IR remote control, similar to the one included, used to change colors and modes.

3. DMX 512 Control

For advanced control, connect the fixture to a DMX controller using 3-pin XLR cables. Set the DMX address and channel mode (5 or 9 channels) via the on-board menu. Refer to the DMX Channel Chart in the Specifications section for detailed channel assignments.

4. Master/Slave-tilstand

Link multiple TrussPar Quad 3 GO fixtures together. Set one unit as the "Master" and others as "Slave" units. The slave units will mirror the master's operation, allowing for synchronized lighting effects without a DMX controller.

5. Auto-tilstand

The fixture has several built-in automatic programs, including fade and chase effects. Select "Auto" mode from the menu and choose your desired program.

6. Sound to Dimmer Mode

In this unique mode, the fixture's digital dimmer responds to the beat of the music, creating dynamic lighting synchronized with audio. Select "Sound to Dimmer" from the menu to activate.

Opretholdelse

• Rensning: Rengør regelmæssigt linsen og huset med en blød, fnugfri klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Når armaturet ikke er i brug, skal det opbevares tørt og støvfrit.
• Batteripleje: For optimal battery life, fully charge the unit before long-term storage and recharge every 3 months.
• Inspektion: Periodically check power cables and DMX connections for wear or damage.

Fejlfinding

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries, please contact ColorKey customer service or visit the official ColorKey webwebsted. Gem din købsbevis til garantikrav.

Fabrikant: ColorKey

Modelnummer: CKU-2060

UPC: 702706437462