Udskiftningsskruer RSAZN203546

ReplacementScrews Cam Lock Screws for IKEA Part 118331 Instruction Manual

Model: RSAZN203546

1. Produktet er slutview

These ReplacementScrews Cam Lock Screws are designed to provide a secure and reliable connection for various furniture assemblies. They serve as a direct replacement for IKEA Part #118331, ensuring compatibility with a wide range of IKEA furniture models.

The screws are engineered for durability and ease of installation, facilitating strong joints between furniture panels without the need for specialized tools or adhesives.

2. Kompatibilitet

These cam lock screws are fully compatible with IKEA part 118331. They are commonly found in popular IKEA furniture series, including but not limited to:

  • PAX wardrobes
  • SLAKT beds
  • BRIMNES furniture
  • HEMNES furniture
  • MICKE desks
  • MALM bed frames and other furniture models

Always verify the required part number for your specific furniture item to ensure correct fitment.

3. komponenter

Each cam lock screw consists of a coarse threaded end, a smooth head, and a central plastic sleeve. They are constructed from high-quality steel with a zinc-plated finish for enhanced corrosion resistance.

Two ReplacementScrews Cam Lock Screws, showing the threaded end, plastic sleeve, and flat head.

Figur 1: Overview of two ReplacementScrews Cam Lock Screws.

Side view of a single ReplacementScrews Cam Lock Screw, highlighting the plastic sleeve and screw head.

Figur 2: Sideprofile of a single cam lock screw, detailing its structure.

4. Installation

Follow these steps to install the cam lock screws:

  1. Step 1: Insert Dowel. Locate the designated threaded hole in the first furniture panel. Using a standard screwdriver, carefully screw the threaded end of the cam lock screw into this hole until it is snug. Do not overtighten.
  2. Step 2: Prepare Mating Panel. Identify the corresponding pre-drilled hole in the second furniture panel where a compatible cam lock (e.g., IKEA part 110630, 113434, or 103430) will be inserted. Ensure the cam lock is correctly oriented.
  3. Step 3: Join Panels. Align the two furniture panels so that the head of the cam lock screw from the first panel slides into the opening of the cam lock in the second panel.
  4. Step 4: Secure Connection. Once the panels are joined and the cam lock screw head is seated within the cam lock, use a screwdriver to turn the cam lock clockwise. This action will pull the two panels tightly together, creating a secure joint.

No glue or special tools are required for this installation process.

Two ReplacementScrews Cam Lock Screws crossed, illustrating their design for furniture assembly.

Figure 3: Cam lock screws ready for assembly.

5. Brug

These cam lock screws are primarily designed to create strong, secure joints between furniture panels, particularly at structural corners. The system works by threading the dowel (cam lock screw) into one panel, and then inserting a compatible cam lock into the adjoining panel. When the panels are brought together, the cam lock engages with the dowel head, and a simple turn of the cam lock draws the two pieces tightly, forming a robust connection.

6. Specifikationer

FeatureDetalje
MaterialeStål, Plast
SlutteForzinket
LængdeApproximately 45mm (1-3/4 inches)
HovedstilPande
TrådtypeCoarse, Right Hand
TråddækningFuldt gevind
FastgørelsestypeScrew (Cam Lock Dowel)
ModelnummerRSAZN203546
Varens vægt1.44 ounces (for a pack of 8)

7. Fejlfinding

7.1 Incorrect Fitment

If the cam lock screws do not fit your furniture, ensure that you have correctly identified IKEA Part #118331 as the required component. Measure the existing screws or the receiving holes to confirm the 45mm (1-3/4 inch) length and thread type are appropriate for your specific furniture model. Some IKEA models may use similar but distinct fasteners.

7.2 Løs forbindelse

If the furniture panels remain loose after installation, verify that the cam lock screw is fully threaded into the first panel and that the mating cam lock is turned clockwise until it firmly engages the screw head. Ensure no debris is obstructing the connection points.

8. Vedligeholdelse

These cam lock screws are designed for long-term durability and require minimal maintenance. Periodically inspect furniture joints for any signs of loosening. If a joint becomes loose, re-tighten the corresponding cam lock by turning it clockwise with a screwdriver. Avoid exposing the screws to excessive moisture or corrosive chemicals to preserve the zinc-plated finish.

9. Support

For further assistance, questions regarding compatibility, or to report any issues, please contact ReplacementScrews directly through their official channels. Refer to the product packaging or the retailer's webwebsted for specifikke kontaktoplysninger.