LEPOTEC 54-LED Motion Sensor Cabinet Light Instruction Manual (Model L54-2-warm)

Indledning

Thank you for choosing the LEPOTEC 54-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting solution. Please read this manual thoroughly before use and retain it for future reference.

Pakkens indhold

2 x LEPOTEC 54-LED Motion Sensor Cabinet Lights
2 x Iron Sheets (for magnetic mounting)
1 x USB ladekabel
2 x klæbebånd
1 x brugermanual

Produkt overview

The LEPOTEC 54-LED Motion Sensor Cabinet Light features 54 lamp beads for bright, soft, and non-glare illumination. Constructed from aluminum alloy, it boasts a slim profile and versatile functionality.

LEPOTEC 54-LED Motion Sensor Cabinet Light with dimensions and charging details — **Billede:** Overview of the LEPOTEC 54-LED Motion Sensor Cabinet Light, showing its dimensions (12.5"L x 1.6"W x 0.4"H), 2500mAh battery capacity, quick charge capability (fully charged in 3 hours), and charging status indicators (red for charging, green for fully charged). It also highlights that it's rechargeable, eliminating the need for frequent battery exchange.

Installation

The light features a built-in magnet for easy attachment and removal. Follow these steps for installation:

Magnetisk fastgørelse: The light has a built-in magnet. It can be directly absorbed onto any ironwork surface.
Klæbende montering: For non-iron surfaces, use the included adhesive tape to attach the iron sheet to your desired location. Once the iron sheet is secured, the light can be magnetically attached to it.
Fjernelse: When charging or relocating, simply detach the light from the magnetic strip or ironwork.

Installation steps for the LEPOTEC Motion Sensor Cabinet Light — **Billede:** Step-by-step guide illustrating the installation process. It shows attaching the iron piece to the desired surface using adhesive tape, then magnetically securing the light to the iron piece. This method allows for easy removal for charging or repositioning.

Driftstilstande

The light features a 3-mode switch (On-Off-G) to adjust its operation:

TIL-tilstand: Lyset forbliver tændt konstant.
FRA -tilstand: Lyset er slukket.
G (Motion Sensor) Mode: In dark environments, the light automatically senses human motion within a 10ft/120° range and turns off after 20 seconds of no movement.

LEPOTEC Motion Sensor Cabinet Light 3-mode switch — **Billede:** Close-up of the light's control panel, highlighting the Type-C charging port, charging indicator, and the 3-mode switch (G, OFF, ON) for motion sensing, no light, and continuously lighting modes.

Motion Sensor Conditions

Under G (Motion Sensor) Mode, the sensor is only activated in low-light conditions. It will not turn on if sufficient ambient light is detected.

Auto-induction condition for LEPOTEC Motion Sensor Cabinet Light — **Billede:** Illustration of the auto-induction condition. In a bright light environment (daytime), the inductor will not be triggered, and the light will remain off. In a low light environment (night), it turns on automatically if motion is sensed within a 10ft/120° range and extinguishes after 20 seconds of no movement.

Opladning

The light features a built-in 2500mAh high-capacity rechargeable battery. It is easily charged via the included USB cable.

Opladningstid: Cirka 3 timer for en fuld opladning.
Batterilevetid: About 3 hours in ON mode, and 2-4 weeks in G (Motion Sensor) mode (activating 10 times a day).
Opladningsindikator: A red light indicates charging, and a green light indicates a full charge.

Brugsscenarier

This versatile light can be used in various indoor locations to provide convenient illumination:

Various usage scenarios for LEPOTEC Motion Sensor Cabinet Light — **Billede:** Examples of where the light can be used, including handheld, in a car trunk, on stairs, and in a children's room. Icons also suggest use in children's rooms, washrooms, kitchens, cupboards, stairs, car trunks, garages, and outdoors.

Fejlfinding

Light not turning on in G Mode: Ensure the environment is dark enough. The sensor will not activate if sufficient ambient light is detected.
Interference between lights: Do not place two motion-activated LED night lights too close to each other, as they can interact and cause one or both products to malfunction.

Specifikationer

Feature	Detalje
Mærke	LEPOTEC
Modelnummer	L54-2-warm
Farve	Silver-warm White Light
Materiale	Aluminium
Produktdimensioner	12.5 cm L x 1.6 cm B x 0.4 cm H
Strømkilde	Batteridrevet (USB genopladelig)
Batteritype	Lithium Polymer (2500mAh)
Lyskildetype	LED (54 l)amp perler)
Lysstyrke	300 lumen
Farvetemperatur	3500 Kelvin (Warm White Light)
Speciel funktion	Bevægelsessensor
Installationstype	Surface Mount (Magnetic/Adhesive)
Indendørs/Udendørs brug	Indendørs
Varens vægt	13.3 ounce

Kundesupport

For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official LEPOTEC webwebsted.

LEPOTEC L54-2-warm

LEPOTEC 54-LED Motion Sensor Cabinet Light

Model: L54-2-warm