Jebao PU-13 Pond and Aquarium Clarifier Instruction Manual

1. Introduktion

The Jebao PU-13 Non-submersible Pond and Aquarium Clarifier is designed to help maintain clear water in ponds and aquariums. It effectively reduces green water and helps prevent unpleasant odors. This unit is suitable for new or existing water features.

Nøglefunktioner omfatter:

• Effective for ponds up to 2,000 gallons (without fish) or 1,000 gallons (with fish).
• Can be installed both vertically and horizontally.
• Includes a G23 13W light bulb.
• Comes with various hose fittings (3/4", 1", 1-1/4", and 1-1/2").
• Equipped with a 22 ft weather-resistant cord and transformer.

2. Sikkerhedsoplysninger

ADVARSEL: Ultraviolet (UV) light can cause damage to eyes and skin. Avoid looking directly at the UV light. Wear protective glasses and clothing during use or maintenance involving the UV lamp.

• Afbryd altid strømmen, før du udfører vedligeholdelse eller installation.
• This unit is designed for out-of-water use only. Do not submerge the clarifier.
• Ensure all electrical connections are dry and protected from water.
• Avoid direct sunlight exposure for the unit to maximize its lifespan.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

• Jebao PU-13 Clarifier Unit
• G23 13W UV Light Bulb (pre-installed or separate)
• Power Adapter/Transformer with 22 ft cord
• Hose Adapters (3/4", 1", 1-1/4", 1-1/2")
• O-rings/Seals
• Mounting Brackets (if applicable)
• Instruktionsmanual

Image: Jebao PU-13 Clarifier unit and its accessories, including the power adapter, various hose adapters, and the owner's manual.

4. Installation

The PU-13 clarifier is designed for non-submersible, out-of-water use. It can be installed either vertically or horizontally. Ensure the installation location is protected from direct sunlight and extreme weather conditions.

4.1 Placering

• Choose a location near your pond or aquarium filter system, but ensure it is not submerged in water.
• Mount the unit securely using the integrated mounting brackets.
• Ensure the unit is easily accessible for maintenance.

4.2 Hose Connections

• Select the appropriate hose adapters (3/4", 1", 1-1/4", or 1-1/2") for your pump and tubing.
• Connect the inlet of the clarifier to the outlet of your pond pump or filter system.
• Connect the outlet of the clarifier to the return line to your pond or aquarium.
• Ensure all connections are tight and secure to prevent leaks. Applying a small amount of silicone grease to rubber seals can aid in sealing and prevent overtightening damage.

Billede: Top-down view of the Jebao PU-13 Clarifier, showing the inlet and outlet ports with clear hose adapters attached.

Billede: Vinklet view of the Jebao PU-13 Clarifier, illustrating the clear hose adapters and the black mounting feet for secure placement.

4.3 Elektrisk tilslutning

• Connect the power adapter to the clarifier unit.
• Plug the transformer into a suitable weather-protected electrical outlet.
• Ensure the electrical outlet is equipped with a Ground Fault Circuit Interrupter (GFCI) for safety.

5. Betjening

Once installed and connected, the Jebao PU-13 Clarifier operates continuously to treat your pond or aquarium water.

• Ensure water is flowing through the unit before powering it on.
• The clarifier is designed to run 24/7 for optimal results.
• The unit is rated for ponds up to 2,000 gallons without fish, or 1,000 gallons with fish. Adjust the flow rate of your pump if necessary to ensure proper contact time with the UV light.
• A small indicator light on the unit or transformer may confirm the UV lamp er i drift.

6. Vedligeholdelse

Regular maintenance ensures the longevity and effectiveness of your clarifier.

6.1 UV Lamp Udskiftning

• The G23 13W UV light bulb has an effective lifespan of approximately 8,000 hours (about 11 months of continuous operation).
• For optimum cleaning performance, it is recommended to replace the bulb every 6 to 12 months.
• Sådan udskiftes pæren:
  1. Afbryd strømmen to the unit and pump.
  2. Lad enheden køle af.
  3. Carefully open the clarifier housing according to the specific instructions in the detailed manual (not provided here, but generally involves unscrewing end caps).
  4. Fjern den gamle UV lamp, handling it by the ceramic base to avoid touching the glass.
  5. Indsæt den nye UV lamp, ensuring it is seated correctly.
  6. Reassemble the unit, ensuring all seals and O-rings are properly seated to prevent leaks.
  7. Tilslut strømmen igen.

6.2 Quartz Sleeve Cleaning

• Periodically inspect and clean the quartz sleeve that encases the UV lamp. Algae or mineral deposits on the sleeve can reduce UV effectiveness.
• To clean the quartz sleeve:
  1. Follow steps 1-3 for UV lamp udskiftning.
  2. Fjern forsigtigt kvartsmuffen.
  3. Clean the sleeve with a soft cloth and a mild acid solution (e.g., vinegar) to remove deposits. Rinse thoroughly with clean water.
  4. Inspect the sleeve for cracks or damage. Replace if damaged.
  5. Reassemble the unit, ensuring all seals are correctly positioned.

7. Fejlfinding

8. Specifikationer

9. Garanti

The Jebao PU-13 Clarifier comes with a 180 dages garanti. This warranty specifically excludes the UV lamp, which is considered a consumable item with a limited lifespan.

Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your product or contact customer support.

10. Kundesupport

For technical assistance, replacement parts, or warranty inquiries, please contact Jebao customer support.

• Refer to the contact information provided in the original packaging or on the official Jebao webwebsted.
• When contacting support, please have your model number (PU-13) and proof of purchase readily available.