SOFLOW SO3 Gen 2

SOFLOW SO3 7.8 Ah Gen 2 elektrisk løbehjul brugermanual

Model: SO3 Gen 2

1. Introduktion

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your SOFLOW SO3 7.8 Ah Gen 2 Electric Scooter. Please read this manual thoroughly before using the scooter to ensure proper handling and to prevent damage or injury.

2. Sikkerhedsoplysninger

Operating an electric scooter carries inherent risks. Adhere to all local traffic laws and regulations. Always wear a helmet and appropriate safety gear. Do not ride under the influence of alcohol or drugs. Avoid riding in adverse weather conditions or on slippery surfaces. Ensure all components are securely fastened before each ride.

  • Brug altid en godkendt hjelm og beskyttelsesudstyr.
  • Overskrid ikke den maksimale bæreevne på 100 kg.
  • Hold en sikker hastighed og afstand til andre køretøjer og fodgængere.
  • Gør dig bekendt med bremsesystemet, inden du kører.
  • Undgå pludselige sving eller manøvrer ved høje hastigheder.

3. Pakkens indhold

Kontroller, at alle varer er til stede og i god stand ved udpakning:

  • SOFLOW SO3 7.8 Ah Gen 2 Electric Scooter
  • Strømadapter/oplader
  • Brugermanual
  • Monteringsværktøj (hvis påkrævet)

4. Opsætning

4.1 Unfolding and Assembly

Carefully unfold the scooter from its compact state. Secure the handlebar stem in the upright position using the locking mechanism. Attach the handlebars if they are separate, ensuring all cables are properly connected and not pinched. Refer to the diagram below for visual guidance.

SOFLOW SO3 Gen 2 Electric Scooter, unfolded and ready for use.

Figure 1: Fully assembled SOFLOW SO3 Gen 2 Electric Scooter.

4.2 Indledende opladning

Before first use, fully charge the scooter's battery. Connect the power adapter to the charging port on the scooter and then to a power outlet. The charging indicator will change when charging is complete. A full charge provides an autonomy of up to 30 km.

4.3 App-forbindelse

Download the official SOFLOW app from your device's app store. Follow the in-app instructions to pair your scooter via Bluetooth. The app allows for useful functions, including changing riding modes and viewing ride statistics.

5. Betjeningsvejledning

5.1 Tænd/sluk

Tryk og hold tænd/sluk-knappen på styrets display nede for at tænde eller slukke løbehjulet. Displayet lyser op og viser batteriniveau, hastighed og køretilstand.

Close-up of the SOFLOW SO3 Gen 2 handlebar with illuminated display and integrated turn signals.

Figure 2: Handlebar display and controls.

5.2 Ridning

To start, kick off with one foot and then gently press the accelerator. The scooter features a 450W hub motor for smooth acceleration. Maintain a balanced posture and keep both hands on the handlebars.

5.3 Bremsning

The scooter is equipped with a front disc brake for effective stopping power. Apply the brake lever gently to slow down, and firmly for emergency stops. The rear wheel also provides braking. Always anticipate stops and brake smoothly.

Close-up of the front wheel and disc brake system on the SOFLOW SO3 Gen 2.

Figure 3: Front wheel with disc brake.

5.4 Turn Signals

The SO3 Gen 2 features integrated turn signals on the handlebars. Activate them to indicate your turning intentions to others. Ensure the signal is visible to surrounding traffic.

6. Vedligeholdelse

6.1 Pleje af batterier

To prolong battery life, avoid fully discharging the battery frequently. Charge the scooter regularly, even if not in use for extended periods (at least once every 30 days). Store the scooter in a cool, dry place.

6.2 Rengøring

Rengør scooteren med annonceamp cloth. Do not use high-pressure water jets or corrosive cleaning agents. Ensure the charging port cover is securely closed during cleaning.

6.3 Tire Pressure and Brakes

Regularly check tire pressure to ensure optimal performance and range. Inspect the brake system, including the disc brake and brake pads, for wear and proper function. Adjust or replace components as necessary.

Close-up of the rear wheel and fender of the SOFLOW SO3 Gen 2.

Figure 4: Rear wheel and fender.

7. Fejlfinding

ProblemMulig årsagLøsning
Scooteren tænder ikkeLavt batteri; Løs forbindelseOplad batteriet; Kontroller alle forbindelser
Reduceret rækkeviddeUnderinflated tires; Overload; Cold weatherInflate tires to recommended pressure; Reduce load; Battery performance decreases in cold
Problemer med appforbindelseBluetooth slukket; Appen er ikke opdateretEnsure Bluetooth is enabled; Update the SOFLOW app; Restart scooter and phone
Bremserne føles svageWorn brake pads; Loose cableInspicer og udskift bremseklodser; Juster bremsekablets spænding

For persistent issues not covered here, please contact SOFLOW customer support.

8. Specifikationer

FeatureDetalje
ModelnavnSO3 Gen 2
Modelnummer300.410.03
Motorkraft450 W navmotor
Batterikapacitet7.8 Ah litium-ion
Max rækkeviddeOp til 30 km
Max belastning100 kg
Dimensioner (L x B x H)105.3 x 49 x 113.8 cm
Vægt16 kg
BremsesystemFront Disc Brake, Rear Braking
Særlige funktionerBluetooth Connectivity, Integrated Turn Signals
RammematerialeAluminium

9. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or visit the official SOFLOW website. If you require technical assistance or have questions not covered in this manual, please contact SOFLOW customer support through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.