EGLO 75555

EGLO Palmaves 1 LED Ceiling Light User Manual

Model: 75555

Indledning

This manual provides instructions for the safe installation, operation, and maintenance of your EGLO Palmaves 1 LED Ceiling Light. Please read these instructions carefully before installation and retain them for future reference. This LED ceiling light features dimmable functionality, adjustable color temperature from warm white to cool white, RGB color options, a night light mode, and is controlled via an included remote.

EGLO Palmaves 1 LED Ceiling Light installed in a modern room

Image: The EGLO Palmaves 1 LED Ceiling Light, featuring two interconnected rings, installed on a ceiling in a modern living space.

Opsætning og installation

Installation should be performed by a qualified electrician in accordance with local wiring regulations. Always ensure the main power supply is disconnected before commencing any electrical work.

Pakkeindhold:

  • EGLO Palmaves 1 LED Ceiling Light fixture
  • Fjernbetjening
  • Monteringsudstyr (skruer, vægdyvler)
  • Monteringsvejledning (dette dokument)

Montering af armaturet:

  1. Sikkerhed først: Sluk for strømmen ved hovedafbryderen før installation.
  2. Forbered monteringsoverfladen: Mark the drilling points on the ceiling using the fixture's mounting bracket as a template.
  3. Bore huller: Bor huller på de markerede punkter, og isæt passende vægdyvler.
  4. Tilslut ledninger: Connect the household electrical wires to the fixture's terminal block. Ensure correct polarity (Live, Neutral, Earth).
  5. Sikker armatur: Attach the mounting bracket to the ceiling using screws. Secure the light fixture to the mounting bracket.
  6. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved hovedafbryderen.

Installation af fjernbetjeningsbatteri:

The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.

Betjeningsvejledning

The EGLO Palmaves 1 LED Ceiling Light is controlled using the provided 2.4G RF remote control. Ensure the remote has fresh batteries and is within range of the light fixture.

EGLO Palmaves 1 LED Ceiling Light Remote Control

Image: The white remote control for the EGLO Palmaves 1 LED Ceiling Light, showing buttons for power, brightness, color temperature, night light, and timer functions.

Fjernbetjeningsfunktioner:

  • TIL/FRA: Tryk for at tænde eller slukke lyset.
  • B- / B+: Adjust brightness levels. B- decreases brightness, B+ increases brightness.
  • WW (varm hvid): Adjusts the color temperature towards warmer tones (e.g., 3000 Kelvin).
  • CW (Cool White): Adjusts the color temperature towards cooler tones (e.g., 6500 Kelvin).
  • Natlys -tilstand: Activates a low-brightness setting (approximately 10% intensity) suitable for night use.
  • Timer: Activates a 30-minute auto-off function. The light will turn off automatically after 30 minutes.
  • RGB: This model supports RGB color changing. Specific buttons or combinations on the remote will cycle through or select various RGB colors. Refer to the remote's markings for exact RGB control.

Pleje og vedligeholdelse

Proper care ensures the longevity and optimal performance of your EGLO Palmaves 1 LED Ceiling Light.

  • Rensning: Afbryd strømmen før rengøring. Brug en blød, tør eller let fugtet klud.amp cloth to wipe the surface of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
  • lysdioder: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light fixture to replace LEDs.
  • Generel inspektion: Kontrollér regelmæssigt armaturet for tegn på skader eller løse forbindelser. Hvis der findes problemer, skal strømmen afbrydes og en kvalificeret elektriker kontaktes.

Fejlfinding

If you encounter issues with your EGLO Palmaves 1 LED Ceiling Light, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Lyset tændes ikke.Ingen strømforsyning.
Fjernbetjeningens batterier er døde.
Fjernbetjeningen er ikke parret.
Kontroller afbryderen og vægafbryderen.
Replace remote control batteries (2 AAA).
Refer to remote control pairing instructions (if applicable, usually involves turning light on/off and pressing a button on remote within seconds).
Lyset reagerer ikke på fjernbetjeningen.Remote control batteries are low/dead.
Forhindring mellem fjernbetjening og lys.
Fjernbetjeningen er ikke parret.
Udskift fjernbetjeningens batterier.
Ensure clear line of sight to the light fixture.
Re-pair the remote control with the light.
Light flickers or has inconsistent brightness.Ustabil strømforsyning.
Løs ledningsforbindelse.
Consult a qualified electrician to check the electrical supply.
Disconnect power and check wiring connections (only by a qualified person).

Specifikationer

Detailed technical specifications for the EGLO Palmaves 1 LED Ceiling Light.

Diagram showing dimensions of EGLO Palmaves 1 LED Ceiling Light

Image: A technical diagram illustrating the dimensions of the EGLO Palmaves 1 LED Ceiling Light, showing diameters of 29 cm and 39 cm, and a height of 7 cm.

FeatureDetalje
Modelnummer75555
Dimensioner (L x B x H)45 x 30 x 12 cm (overall); Large element: Ø 39 cm; Small element: Ø 29 cm; Height: 7 cm
Vægt994 gram
StrømkildeAC Power (240 Volts)
Wattage21.6 watt (maks.)
Lysstrøm2940 Lumen (maks.)
Farvetemperatur3000K (Warm White) - 6500K (Cool White), RGB
DæmpbarJa
KontrolmetodeRemote Control (2 AAA batteries required)
MaterialeAluminum, Alloy Steel, Plastic
ArmaturformRundt loftslampe
InstallationstypeFlush Mount
Indendørs/Udendørs brugKun indendørs
EnergiklasseE
OprindelseslandKina

Garantioplysninger

The EGLO Palmaves 1 LED Ceiling Light comes with a limited warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty documentation provided with your purchase or contact EGLO customer service. Keep your proof of purchase for warranty claims.

Kundesupport

If you require further assistance, have questions not covered in this manual, or need to report a defect, please contact EGLO customer service. Contact information can typically be found on the EGLO webwebstedet eller på din produktemballage.

Webwebsted: www.eglo.com

Relaterede dokumenter - 75555

Preview EGLO GIANELLA LED loftlampe Lamp - Installations- og betjeningsvejledning
Detaljerede instruktioner til installation og betjening af EGLO GIANELLA LED loftlampeamp, inklusive ledningsdiagrammer, monteringstrin og dæmpningsfunktioner. Artikelnummer 900947.
Preview EGLO GIRON-TW LED loftlampe installations- og fjernbetjeningsvejledning (Art.Nr. 75507, 31048)
Omfattende vejledning til installation af EGLO GIRON-TW LED-loftlampen (artikelnumre 75507, 31048) og betjening af dens ET3386 IR-fjernbetjening til justering af lysstyrke og farvetemperatur.
Preview EGLO HOVLEY 35253 Ceiling Fan - Installation, Operation, and Maintenance Manual
This document provides comprehensive instructions for the EGLO HOVLEY 35253 ceiling fan, including safety guidelines, installation steps, operation details via remote control, technical specifications, and maintenance procedures. It ensures compliance with European directives and highlights energy efficiency.
Preview EGLO 39685A LEMORIETA pendellampe installationsvejledning
Detaljeret installationsvejledning til EGLO 39685A LEMORIETA pendellampen, inklusive sikkerhedsforanstaltninger, ledningsføring og instruktioner til højdejustering.
Preview EGLO CUITE 390063A/390064A Bord Lamp Instruktioner
Officiel monterings- og brugsanvisning til EGLO CUITE bordet lamp, modellerne 390063A og 390064A. Lær, hvordan du installerer pæren, monterer skærmen og tilslutter strømmen.
Preview EGLO 204553A Broyles Chandelier Installation Guide
Official installation instructions for the EGLO 204553A Broyles chandelier. Includes safety precautions and assembly steps for this lighting fixture.