ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight User Manual

1. Introduktion

Thank you for choosing the ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference. This product complies with EN60598-1 and other specific standards.

2. Sikkerhedsinstruktioner

• Always disconnect the power supply at the main circuit breaker before installation, maintenance, or bulb replacement.
• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale el-forskrifter og -regler.
• Dette produkt er designet til kun indendørs brug. Do not install in wet or damp steder.
• Ensure the ceiling material can support the weight of the fixture.
• Overskrid ikke det maksimale wattage of 50W for the GU10 bulb.
• Avoid touching the bulb directly with bare hands, as oils can reduce bulb life.
• Hold brandfarlige materialer væk fra lysarmaturet.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1x Recessed Spotlight Housing (White Aluminum)
• Monteringshardware
• Elektrisk ledning
• Klæbepude

Image 1: Components of the ONE Light Trimless Recessed Spotlight, showing the mounting bracket and the light housing.

4. Opsætning og installation

This trimless recessed spotlight requires careful installation to achieve a seamless finish. Professional installation is recommended.

4.1 Dimensions and Preparation

Before cutting, ensure the chosen location avoids joists, pipes, or electrical wires. Refer to the dimensional diagram for precise cutout requirements.

Image 2: Dimensional diagram of the ONE Light Trimless Recessed Spotlight, indicating a 60mm diameter and 40mm height.

4.2 Installationstrin

1. Sluk for strømmen: Sørg for, at hovedstrømforsyningen til installationsområdet er afbrudt ved afbryderen.
2. Forbered loftåbning: Using the provided dimensions (60mm diameter), cut a precise hole in the ceiling. For trimless installation, additional plastering work around the fixture may be required after mounting the housing.
3. Ledningsforbindelser: Connect the electrical cord from the spotlight housing to your main electrical wiring. Ensure all connections are secure and insulated according to local electrical codes.
4. Monteringshus: Insert the spotlight housing into the ceiling opening. Use the provided mounting hardware to secure the housing firmly in place. For a trimless finish, the housing should be flush with the ceiling surface, ready for plastering.
5. Installer GU10-pære: Once the housing is securely installed and any finishing work is complete, insert a GU10 bulb (max 50W) into the lamp holder. Twist to lock it in place.
6. Afsluttende samling: Insert the inner light component into the outer housing.
7. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.

5. Betjeningsvejledning

The ONE Light 10105TR/W spotlight operates via a standard wall switch connected to its electrical circuit. This fixture is ikke dæmpbar.

5.1 Udskiftning af pære

To replace the GU10 bulb:

1. Sluk for strømmen: Always disconnect power at the circuit breaker before replacing the bulb.
2. Lad afkøle: Let the old bulb cool down completely before touching it.
3. Remove Bulb: Gently push the bulb upwards and twist it counter-clockwise to release it from the GU10 base.
4. Indsæt ny pære: Align the pins of the new GU10 bulb with the slots in the lamp holder. Push upwards and twist clockwise to secure it. Ensure the new bulb is a GU10 type and does not exceed 50W.
5. Gendan strøm: Gendan strømmen ved afbryderen.

6. Vedligeholdelse

The ONE Light 10105TR/W spotlight requires minimal maintenance.

• Rensning: Ensure the power is off and the fixture is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Ingen dele, der kan serviceres af brugeren: Other than bulb replacement, there are no user-serviceable parts inside the fixture. Do not attempt to disassemble the unit.

7. Fejlfinding

Hvis du støder på problemer med din spotlight, kan du se følgende almindelige problemer og løsninger:

• Lyset tændes ikke:
  • Check if the power supply to the fixture is on at the circuit breaker and wall switch.
  • Sørg for, at GU10-pæren er korrekt installeret og ikke defekt. Prøv at udskifte den med en pære, du ved fungerer.
  • Kontroller, at de elektriske forbindelser er sikre (kontakt en kvalificeret elektriker, hvis du er i tvivl).
• Lysflimmer:
  • Ensure the GU10 bulb is fully seated and twisted into the base.
  • The bulb may be faulty or nearing the end of its life. Replace the bulb.
  • Kontrollér for løse ledningsforbindelser (kontakt en kvalificeret elektriker).

8. Specifikationer

Image 3: EU Energy Label for the luminaire, indicating compatibility with bulbs of various energy classes from A++ to E.

9. Garanti og support

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to your seller or the ONE Light customer service department.