ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire User Manual

Indledning

Tak for købetasing the ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire. This manual provides essential information for the safe installation, operation, and maintenance of your new LED light fixture. Please read these instructions carefully before installation and retain them for future reference.

Sikkerhedsinstruktioner

• Elektrisk sikkerhed: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter. Sørg for, at hovedstrømforsyningen er afbrudt ved afbryderen, før installations- eller vedligeholdelsesarbejde påbegyndes.
• Voltage: This luminaire is designed for operation with a 100-240V AC power supply. Verify your supply voltage opfylder dette krav.
• Montering: Ensure the mounting surface is structurally sound and capable of supporting the weight of the luminaire.
• IP54-klassificering: This product is rated IP54, indicating protection against dust ingress and splashing water from any direction. It is suitable for both indoor and outdoor use, but not for submersion.
• LED lyskilde: LED lamps are built-in and cannot be changed. Do not attempt to open or modify the LED module.
• Varme: The luminaire may become warm during operation. Avoid touching the surface directly after extended use.

Pakkens indhold

Kontroller venligst, at alle komponenter er til stede og ubeskadigede før installation:

• ONE Light 67384/AN/W LED Luminaire (1 unit)
• Monteringsudstyr (skruer, vægdyvler)
• Instruktionsmanual (dette dokument)

Opsætning og installation

Følg disse trin for sikker og korrekt installation:

1. Forberedelse: Switch off the main power supply at the circuit breaker. Ensure the installation area is clean and dry.
2. Monteringssted: Select a suitable wall or ceiling location for the luminaire. Consider the desired light distribution and accessibility for future maintenance.
3. Mærkning: Use the luminaire's mounting bracket as a template to mark the drilling points on the surface.
4. Boring: Bor huller på de markerede punkter med et passende bor til dit vægmateriale. Indsæt rawlplugs om nødvendigt.
5. Ledningsføring: Connect the electrical wires from your power supply to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) as indicated on the luminaire. Secure all connections tightly.
6. Mounting the Luminaire: Secure the luminaire to the mounting surface using the provided screws. Ensure it is firmly attached and stable.
7. Endelig kontrol: Double-check all connections and ensure the luminaire is securely mounted. Restore power at the circuit breaker.

Image: The ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire, showcasing its sleek, round design suitable for modern indoor and outdoor environments.

Image: Technical drawing illustrating the dimensions of the luminaire: 340mm diameter and 50mm height.

Betjeningsvejledning

The ONE Light 67384/AN/W luminaire is designed for simple operation.

• Tænd/sluk: Control the luminaire using a standard wall switch (push button controller type). Flip the switch to turn the light on or off.
• Lyskilde: This luminaire features a built-in LED light source that provides warm white (WW) illumination. The LEDs are non-removable and designed for long-term use.

Opretholdelse

Regular maintenance ensures optimal performance and longevity of your luminaire.

• Rensning: Before cleaning, ensure the power supply to the luminaire is switched off. Use a soft, damp cloth to wipe the exterior surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Lamp Udskiftning: LED lamps in this luminaire are built-in and cannot be replaced. If the LED light source fails, the entire luminaire must be replaced by a qualified professional.
• Inspektion: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, switch off the power and consult a qualified electrician.

Image: EU Energy Label for the luminaire, indicating it contains built-in LED lamps that cannot be changed, in compliance with regulation 874/2012.

Fejlfinding

If you encounter issues with your luminaire, refer to the following common problems and solutions:

• Lyset tænder ikke:
  • Kontroller om hovedstrømforsyningen er tændt.
  • Kontroller, at vægkontakten er i 'ON'-positionen.
  • Inspect electrical connections for looseness or damage (ensure power is off before inspection).
  • Check the circuit breaker for a tripped fuse.
• Lys flimrer:
  • Sørg for, at alle elektriske forbindelser er sikre.
  • Bekræft strømforsyningen voltage is stable and within the specified range (100-240V).
• Reduceret lysstyrke:
  • Clean the luminaire's surface to remove any dust or dirt accumulation.
  • LEDs have a long lifespan, but gradual degradation can occur over many years.

If the problem persists after attempting these solutions, contact a qualified electrician or the retailer for assistance. Do not attempt to repair the luminaire yourself.

Specifikationer

Garanti og support

For garantioplysninger henvises til de vilkår og betingelser, som din forhandler oplyste på købstidspunktet. Gem din købsbevis til eventuelle garantikrav.

If you require technical support or have questions not covered in this manual, please contact the retailer where you purchased the product or visit the official ONE Light webwebsted for kontaktoplysninger.