1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of the Eltako FD62NPN-230V Flush-Mounted Dimmer Actuator. This universal wireless dimmer is designed for controlling various dimmable light sources, including 230V LED, incandescent, and halogen lamps. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
2. Sikkerhedsoplysninger
ADVARSEL: Electrical installation should only be performed by a qualified electrician. Failure to follow these instructions can result in electric shock, fire, or serious injury.
- Afbryd altid strømmen ved hovedafbryderen, før du installerer eller servicerer enheden.
- Sørg for, at forsyningen voltage matches the device's specifications (230V AC, 50Hz).
- Overskrid ikke den maksimale belastningskapacitet på 300 W.
- Do not use with inductive transformers (wound).
- Neon lamp strøm er ikke tilladt.
- Beskyt enheden mod fugt, støv og ekstreme temperaturer.
- Opbevares utilgængeligt for børn.
Figure 1: Eltako FD62NPN-230V Dimmer Actuator. This image shows the compact blue housing, terminal connections, and key technical specifications printed on the device, including model number, voltage, maximum load, and EnOcean ID.
3. Produktet er slutview
The Eltako FD62NPN-230V is a compact, flush-mounted universal dimmer actuator designed for seamless integration into your electrical system. It utilizes EnOcean wireless technology for control and offers robust dimming capabilities for various lighting types.
Nøglefunktioner:
- Universal Dimming: Compatible with 230V LED (phase cut-off/cut-in), incandescent, and halogen lamps.
- Power MOSFET Technology: Ensures efficient and reliable dimming.
- Trådløs kontrol: Supports up to 32 EnOcean wireless buttons, directional buttons, central control buttons, and motion sensors.
- Lokal kontrol: Can also be controlled by a conventional 230V push-button switch.
- Hukommelsesfunktion: Retains the last set brightness level upon power off.
- Blød ON/OFF: Provides gentle illumination transitions.
- Nul-gennemgangskobling: Enhances lamp life and reduces interference.
- Sikkerhedsfunktioner: Automatic electronic overload protection and overheating shutdown.
- Kompakt design: Flush-mounted, dimensions 49 x 51 mm, 20 mm depth.
- Low Standby Loss: Only 0.5W.
- Repeaterfunktion: Extends the range of EnOcean signals.
4. Opsætning og installation
4.1 Montering
The FD62NPN-230V is designed for flush-mounted installation. Its compact size (49 x 51 mm, 20 mm depth) allows it to fit into standard electrical boxes. Ensure adequate ventilation around the device, especially when operating at higher loads, to prevent overheating.
4.2 Ledningsforbindelser
Before making any connections, ensure the main power supply is disconnected. The device features plug-in terminals suitable for conductor cross-sections from 0.2 mm² to 2.5 mm². Strip wires to 8mm before insertion.
Refer to the wiring diagram on the device and below for correct connections:
- N: Neutral conductor input.
- L: Live conductor input (230V AC, 50Hz).
- L with circle: Switched live output to the lamp.
- E': Input for local conventional 230V push-button switch (optional).
- N (second): Neutral conductor output (if applicable for local switch).
Figur 2: Nærbillede view of the wiring terminals on the Eltako FD62NPN-230V. Labels N, L, and the switched output are visible, along with the 8mm wire stripping guide.
4.3 Learning-in Wireless Transmitters (EnOcean)
The dimmer actuator can learn up to 32 wireless transmitters (buttons, sensors). The learning process typically involves a specific sequence of pressing the local control button (if connected) or a dedicated learning button on the device (refer to the full Eltako documentation for exact steps, as this device image does not show a dedicated learning button, implying local button or power cycle method). Once in learning mode, activate the desired wireless transmitter to pair it with the dimmer.
The EnOcean ID (EnOID 0424EB6F) and reference number (Ref 000469 42/22) are printed on the device for identification during advanced configuration or troubleshooting.
5. Betjening
5.1 Dæmpningskontrol
Once installed and paired, the dimmer can be controlled via connected wireless transmitters or a local conventional push-button switch.
- Kort tryk: Toggles the light ON/OFF with a soft transition.
- Langt tryk: Dims the light up or down. Releasing and pressing again will reverse the dimming direction.
5.2 Hukommelsesfunktion
The dimmer actuator features a memory function. The last set brightness level is automatically saved and restored when the light is turned back on, even after a power outage. In case of a power failure, the device will default to a defined state (usually OFF or a low brightness level) upon restoration, then recall the last setting.
5.3 Load Type Selection (Automatic)
The FD62NPN-230V automatically detects the connected load type (R, L, C, ESL for LED) and adjusts its dimming curve accordingly. For 230V LED lamps, it operates in phase cut-off mode up to 300W or phase cut-in mode up to 100W, depending on the specific LED lamp and ventilation conditions. For incandescent and halogen lamps, it supports up to 300W.
6. Tekniske specifikationer
| Model | FD62NPN-230V (Part No. 30100535) |
| Mærke | Eltako |
| Forsyning Voltage | 230V AC 50Hz |
| Max. Load (LED, phase cut-off) | Up to 300W (depending on ventilation) |
| Max. Load (LED, phase cut-in) | Up to 100W (depending on ventilation) |
| Max. Load (Incandescent/Halogen) | Up to 300W (depending on ventilation) |
| Minimumsbelastning | Ingen |
| Standby tab | 0.5W |
| Dimensioner (H x B x D) | Ca. 49 x 51 x 20 mm |
| Tilslutningsterminaler | Plug-in, 0.2 mm² to 2.5 mm² |
| Trådløs teknologi | EnOcean |
| EnOcean ID | 0424EB6F |
| Materiale | Plast |
7. Vedligeholdelse
The Eltako FD62NPN-230V dimmer actuator is designed for maintenance-free operation. No regular servicing is required.
- Ensure the device remains free from dust and moisture.
- Do not attempt to open or repair the device yourself. This will void the warranty and may pose a safety risk.
- If cleaning is necessary, disconnect power and wipe with a dry, soft cloth. Do not use liquid cleaners.
8. Fejlfinding
If you experience issues with your Eltako FD62NPN-230V, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Light does not turn ON/OFF or dim. | Ingen strømforsyning. Forkert ledningsføring. Wireless transmitter not paired. Overbelastningsbeskyttelse aktiveret. | Tjek afbryderen. Bekræft ledningsføringen i henhold til diagrammet. Perform learning-in procedure for wireless transmitter. Reduce load; device may reset automatically after cooling. |
| Light flickers or dims unevenly. | Uforenelig lamp type. Load too low or too high. Poor quality LED lamps. | Sørg for lamps are dimmable and compatible with phase cut-off/cut-in. Check total wattage af tilsluttet lamps against specifications. Try different brand/model of dimmable LED lamps. |
| Wireless control range is poor. | Obstructions (metal, concrete walls). Afstanden er for stor. | Relocate wireless transmitter or use the repeater function of the dimmer actuator. |
| Device is hot to the touch. | Overbelaste. Utilstrækkelig ventilation. | Reduce connected load. Ensure proper air circulation around the device. The device has overheating protection and will shut down if necessary. |
If the problem persists after attempting these solutions, contact Eltako customer support or a qualified electrician.
9. Garanti og support
Eltako products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Eltako webhjemmeside for detaljerede garantivilkår.
For technical support, product inquiries, or service, please contact Eltako customer service:
- Webwebsted: www.eltako.com
- Adresse: Eltako GmbH, Hofener Str. 54, 70736 Fellbach, Germany