MEIKEE 20W LED PIR Motion Sensor Security Floodlight User Manual

Indledning

Tak for købetasing the MEIKEE 20W LED PIR Motion Sensor Security Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlight. Please read these instructions carefully before use and retain them for future reference.

Vigtige sikkerhedsinstruktioner

• Afbryd altid strømmen før installation eller service.
• Installationen skal udføres af en kvalificeret elektriker eller i overensstemmelse med lokale el-forskrifter.
• Sørg for, at strømforsyningen voltage matches the product specifications (85-265VAC).
• Se ikke direkte ind i LED-lyskilden, når den er tændt, da det kan forårsage øjenskader.
• Do not modify the product in any way, as this will void the warranty and may pose safety risks.
• Hold emballagemateriale væk fra børn.

Pakkens indhold

Tjek venligst pakken for følgende varer:

• 1x MEIKEE 20W Motion Sensor Floodlight
• 1x Screw Package (Mounting Hardware)
• 1x Brugermanual (dette dokument)

Produkt overview

The MEIKEE 20W LED PIR Motion Sensor Security Floodlight is designed for outdoor use, featuring a sensitive motion sensor and durable, waterproof construction. It provides warm white illumination for enhanced security and convenience.

Figur 1: Front view of the MEIKEE 20W LED PIR Motion Sensor Security Floodlight, showing the main light panel, integrated motion sensor, and mounting bracket.

Nøglefunktioner:

• Wattage: 20W LED
• Lumen output: 1700 lm
• Farvetemperatur: Varm hvid
• Bevægelsessensor: PIR (Passive Infrared) with 180° detection angle and up to 12m detection distance.
• Vandtæt vurdering: IP66 for floodlight, IP65 for sensor.
• Justerbare indstillinger: Time duration and light sensitivity (LUX).
• Holdbar konstruktion: Aluminum body, nano-material front cover.

Installationsvejledning

Before installation, ensure the power supply is turned off at the main circuit breaker.

1. Vælg et monteringssted: Select a suitable location for the floodlight, ideally between 9.84ft (3m) and 16.4ft (5m) high for optimal detection range and light coverage. Consider the 120° beam angle and 12m detection distance.
   

   Figur 2: Illustration of optimal mounting height (9.84ft - 16.4ft) and detection range (max 39ft / 12m) for the floodlight, showing a 120° beam angle.
2. Markér borepunkter: Brug monteringsbeslaget som skabelon til at markere borepunkterne på væggen eller monteringsfladen.
3. Bore huller: Drill holes at the marked points and insert appropriate wall plugs (if necessary, depending on the surface).
4. Fastgør beslaget: Attach the mounting bracket to the surface using the provided screws.
5. Wire the Floodlight: Connect the floodlight's cable to your main power supply. The 1.5m cable includes three wires: Live (Brown), Neutral (Blue), and Earth (Yellow/Green). Ensure correct polarity and secure connections.
   

   Figur 3: Bag view of the floodlight, illustrating the adjustable mounting bracket and the power cable connection point.

6. Adjust Sensor Angle: The motion sensor can be rotated 360° horizontally and 270° vertically to cover the desired detection area.
   

   Figur 4: Close-up of the motion sensor showing the TIME and LUX adjustment dials protected by a waterproof soft rubber cover, and illustrations of the sensor's 360° horizontal and 270° vertical rotation capabilities.

7. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen til kredsløbet genoprettes.

Operation

The MEIKEE floodlight features two adjustable settings on the motion sensor: TIME and LUX. These settings are located under a waterproof soft rubber cover on the sensor unit.

Figur 5: Detaljeret view of the TIME and LUX adjustment dials on the motion sensor.

1. TIME Setting:

This dial controls the duration the light stays on after motion is detected and the sensor is triggered. Rotate the dial to select the desired time:

• 10s: Lyset forbliver tændt i cirka 10 sekunder.
• 45s: Lyset forbliver tændt i cirka 45 sekunder.
• 120s: Light stays on for approximately 120 seconds (2 minutes).
• 600s: Light stays on for approximately 600 seconds (10 minutes).

2. LUX Setting:

This dial determines the ambient light level at which the sensor will activate the floodlight. Rotate the dial to select the desired mode:

• "SUN" (Daylight Mode): The sensor will work continuously, activating the light both during the day and at night when motion is detected.
• "MOON" (Night Mode): The sensor will only activate the light when motion is detected during low light conditions or at night.

Note: The detection range defaults to a maximum of 12 meters (39 feet).

Opretholdelse

• Rensning: Periodically clean the floodlight and sensor lens with a soft, damp klud for at sikre optimal ydeevne. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power and have it repaired by a qualified technician.
• Ingen dele, der kan serviceres af brugeren: The LED light source and sensor unit are not user-replaceable. Do not attempt to open or repair the unit.

Fejlfinding

Specifikationer

Figur 6: Diagram showing the approximate dimensions of the floodlight: 140mm (5.51in) width, 98mm (3.82in) height, and 60mm (2.4in) depth (excluding the sensor and bracket).

For detailed product information and energy efficiency, please refer to the official EPREL database: EPREL Produktinformationsblad

Garanti og support

MEIKEE products are designed for durability and performance. For warranty information or technical support, please contact your retailer or visit the official MEIKEE webwebsted. Gem venligst din købsbevis til garantikrav.