Tsurumi Pump 12PN Dykbar Dam- og Vandfaldspumpe Brugsanvisning

1. Introduktion

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Tsurumi Pump 12PN submersible pond and waterfall pump. Please read this manual thoroughly before using the pump to ensure proper function and longevity. Retain this manual for future reference.

Billede 1.1: The Tsurumi 12PN pump is suitable for various water features, including fountains, waterfalls, and ponds.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af pumpen:

• Elektrisk sikkerhed: Sørg for, at strømforsyningen passer til pumpens volumentage (115V). Always connect to a grounded outlet. Do not operate the pump with a damaged power cord. Never handle the pump or power cord with wet hands.
• Nedsænkning: Denne pumpe er kun beregnet til brug under vand. Må ikke anvendes uden vand.
• Installation: Securely install the pump to prevent movement. Ensure the discharge hose is properly connected.
• Opretholdelse: Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
• Børn og kæledyr: Hold børn og kæledyr væk fra pumpen og vandfunktionen under drift.

3. Produktet er slutview og funktioner

The Tsurumi Pump 12PN is a robust submersible pump engineered for pond and waterfall applications. It features durable construction and efficient performance.

Billede 3.1: The Tsurumi 12PN Submersible Pump.

Nøglefunktioner:

• Holdbar konstruktion: Features a stainless-steel housing and fiberglass-reinforced plastic impeller, volute, and top cover for corrosion resistance and durability.
• Eco-Friendly Lubrication: Utilizes white mineral oil in the oil chamber, creating a safe environment for aquatic ecosystems.
• Høj ydeevne: Capable of pumping up to 11,500 gallons per hour with a maximum head of 23 feet.
• Håndtering af faste stoffer: Can manage solids up to 1.4 inches in diameter.
• Advanced Sealing: Equipped with a dual inside mechanical seal with silicon carbide faces to prevent leakage and extend pump life.
• Lang strømledning: Comes standard with a 20-foot power cord.

Billede 3.2: Key features of the Tsurumi 12PN pump.

4. Specifikationer

Billede 4.1: Performance curve for the Tsurumi 12PN pump.

5. Opsætning

Follow these steps for proper installation of your Tsurumi 12PN pump:

1. Placering: Position the pump on a stable, level surface within the pond or water feature. Ensure it is fully submerged and not resting directly on soft sediment. Using a pump stand or elevated platform is recommended to prevent clogging from debris.
2. Afladningsforbindelse: Connect a suitable discharge hose or pipe to the pump's 3-inch discharge port. Ensure all connections are secure and watertight to prevent leaks and maintain optimal flow.
3. Elektrisk tilslutning: Route the 20-foot power cord safely, avoiding kinks or damage. Connect the pump to a dedicated 115V, grounded electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords unless absolutely necessary and ensure they are rated for outdoor use and the pump's power requirements.
4. Indledende kontrol: Before powering on, verify that the pump is fully submerged and all connections are tight.

Billede 5.1: The Tsurumi 12PN pump installed in a water environment.

6. Betjeningsvejledning

Når pumpen er korrekt installeret og nedsænket, er betjeningen ligetil:

1. Tænd: Plug the pump's power cord into the GFCI-protected 115V outlet. The pump should start immediately.
2. Overvåg flow: Observe the water flow from the discharge. Ensure it is consistent and free of air bubbles, which could indicate an airlock or insufficient water level.
3. Kontinuerlig drift: The Tsurumi 12PN is designed for continuous operation in submerged conditions.
4. Sluk: For at stoppe pumpen skal du blot tage stikket ud af stikkontakten.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger pumpens levetid:

• Afbryd strømmen: Tag altid stikket ud af pumpen, inden du udfører nogen form for vedligeholdelse.
• Clean Impeller and Volute: Periodically remove the pump from the water and inspect the impeller and volute for debris (leaves, algae, small stones). Clean thoroughly with water and a soft brush.
• Tjek strømledningen: Undersøg netledningen for tegn på skader, snit eller flosning. Udskift den, hvis den er beskadiget.
• Vinterisering: In freezing climates, remove the pump from the water before temperatures drop below freezing. Clean it thoroughly and store it in a dry, frost-free location.
• Oil Chamber: The pump's oil chamber contains white mineral oil for lubrication. This is a sealed unit and typically does not require user intervention. If leakage is suspected, contact Tsurumi Pump support.

8. Fejlfinding

Se følgende tabel for almindelige problemer og løsninger på disse:

9. Garanti og support

The Tsurumi Pump 12PN comes with a 2 ÅRS GARANTI. The product is UL & CSA certified, ensuring compliance with safety and quality standards.

For any questions, concerns, or warranty claims, please contact Tsurumi (America), Inc. customer support.

10. Kontaktoplysninger

Tsurumi (America), Inc.
For technical assistance, parts, or service inquiries, please visit the official Tsurumi Pump website or refer to your purchase documentation for direct contact details.