tectake 402450 Foldable Work Trestle Instruction Manual

1. Introduktion

Thank you for choosing the tectake 402450 Foldable Work Trestle. This manual provides important information for the safe assembly, operation, and maintenance of your new work trestles. Please read these instructions carefully before use and keep them for future reference. Proper use ensures safety and extends the product's lifespan.

Sikkerhedsoplysninger

• Always ensure the work trestles are placed on a stable, level surface.
• Do not exceed the maximum load capacity of 220 kg per trestle.
• Ensure all safety pins and plank catches are securely engaged before placing any load.
• Keep hands and fingers clear of moving parts during assembly and height adjustment.
• Inspect the trestles for damage before each use. Do not use if damaged.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede ved udpakning.

• 2 x tectake 402450 Foldable Work Trestles
• Assembly materials (pre-installed or minor assembly required)

3. Opsætning og montering

The tectake work trestles are designed for quick setup. Minor assembly of certain components may be required, typically involving securing pre-drilled parts with provided fasteners.

Unfolding the Work Trestle

1. Place the folded trestle on a flat surface.
2. Carefully extend the legs outwards until they are fully open and stable.
3. Ensure all locking mechanisms for the legs are engaged to prevent accidental folding.

Image: The work trestle in its folded state, ready for storage or transport.

Image: The work trestle fully unfolded, showing its stable A-frame structure.

Justering af højden

The work trestle features a 7-position height adjustment mechanism.

1. Locate the height adjustment pins on the vertical supports.
2. Pull out the safety pin and slide the upper section to the desired height.
3. Align the holes and re-insert the safety pin completely through both sides of the support to lock the height.
4. Ensure the pin is fully seated and secure before applying any load.

Image: Detail of the height adjustment mechanism, showing the safety pin and chain for secure locking.

Using the Plank Safety Catches

The foldable plank safety catches prevent workpieces or planks from slipping off the trestle.

1. Once the trestle is set to the desired height, flip up the plank safety catches located on the top bar.
2. Place your plank or workpiece between these catches.
3. Ensure the catches are upright and securely holding the material.

Billede: Et nærbillede view of the plank safety catch, demonstrating how it secures a wooden plank on the trestle.

4. Betjeningsvejledning

The tectake work trestles are designed for supporting various materials during construction, DIY, or workshop tasks.

• Belastningskapacitet: Each trestle can support up to 220 kg. When using two trestles, distribute the load evenly.
• Arbejdshøjde: Adjust the height to a comfortable and safe level for your task, ensuring the safety pins are fully engaged. The adjustable height range is 79.5 cm to 130 cm.
• Stabilitet: Always use two trestles for long or heavy items to ensure stability and prevent tipping.
• Opbevaring: When not in use, fold the trestles for compact storage.

Image: Two tectake work trestles in use, supporting a wooden plank and a power tool, demonstrating a typical application.

5. Vedligeholdelse

Regular maintenance ensures the longevity and safe operation of your work trestles.

• Rensning: Tør stålrammen af ​​med reklameamp klud til at fjerne støv, snavs eller affald. Undgå slibende rengøringsmidler.
• Inspektion: Periodically check all bolts, nuts, and locking mechanisms for tightness and wear. Tighten any loose fasteners.
• Smøring: Apply a light lubricant to the height adjustment mechanism if it becomes stiff.
• Opbevaring: Store the trestles in a dry environment to prevent rust, especially if they are powder-coated steel.

6. Fejlfinding

If you encounter issues with your work trestles, consider the following:

• Trestle feels unstable: Ensure all legs are fully extended and locked, and the trestle is on a firm, level surface. Verify that height adjustment pins are fully engaged.
• Vanskeligheder med at justere højden: Check for debris in the adjustment holes. Apply a small amount of lubricant if the mechanism is stiff. Ensure the safety pin is fully removed before attempting to adjust.
• Plank slipping: Confirm that the plank safety catches are flipped up and properly positioned to secure the workpiece.

For issues not resolved by these steps, please contact tectake customer support.

7. Specifikationer

8. Garanti og support

tectake products are manufactured to high-quality standards. For information regarding warranty terms, product support, or spare parts, please refer to the purchase documentation or contact tectake customer service directly. Keep your proof of purchase for any warranty claims.