Infinity Reference-6001A Mono Amplivligere brugervejledning

1. Introduktion

The Infinity Reference-6001A is a high-performance 600-watt mono subwoofer amplifier designed to enhance your vehicle's audio system. This amplifier delivers robust bass output with minimal strain on your vehicle's electrical system, thanks to its Class D design. It features versatile input options and precise tuning controls to optimize subwoofer performance.

Figur 1: Øverst view of the Infinity Reference-6001A Mono Ampløfter, showcasing its compact design and Infinity logo.

2. Nøglefunktioner

• Kompakt design: Har en lav-profile chassis and small footprint for installation in vehicles with limited space.
• Variable Electronic Crossovers and Bass Boost: Allows for precise system tuning and optimized subwoofer performance.
• Balanced Differential Inputs: Engineered to ensure low noise and distortion, even at high output levels, and reduces susceptibility to line-induced engine noise.
• On-board Protection Circuitry: Beskytter amplifier from shorts, high-temperature, overvoltage, og undervoltage conditions. An LED indicator signals when these conditions occur.
• RBC Wired Remote: Provides convenient volume adjustment for the subwoofer from the driver's seat.
• High and Low-Level Inputs: Compatible with both aftermarket and factory car stereo systems.

3. Opsætning og installation

Korrekt installation er afgørende for optimal ydeevne og sikkerhed. Det anbefales, at installationen udføres af en kvalificeret fagmand.

3.1 Montering af Amplivligere

Select a mounting location that is dry, well-ventilated, and secure. The compact size of the Reference-6001A allows for flexible placement in various vehicles. Ensure adequate airflow around the ampfor at forhindre overophedning.

3.2 Ledningsforbindelser

Refer to the diagram below for typical wiring connections. Always disconnect the vehicle's battery before making any power connections.

Figur 2: Bagside view af amplifier showing power, ground, remote, speaker, and RCA input terminals.

• Strøm (+12V): Connect to the positive terminal of the vehicle's battery using a fuse-protected power cable.
• Jord (GND): Tilslut til en ren, umalet metaloverflade på køretøjets chassis.
• Fjernbetjening (REM): Tilslut til fjernbetjeningens tændingsudgang på din hovedenhed.
• Speaker Output (SUB): Connect your subwoofer(s) to these terminals. Ensure correct polarity.
• Indgang (RCA eller højttalerniveau): Use RCA cables for low-level inputs from an aftermarket head unit or speaker-level inputs for factory radios.
• Remote Control (RBC): Connect the wired remote bass knob to the designated port for convenient bass level adjustment.

4. Betjening af Amplivligere

Når den er installeret, skal du justere amplifier settings to match your audio system and personal preferences.

4.1 Forstærkningsjustering

Set the gain control to match the output voltage på din hovedenhed. Start med minimumsforstærkningen og øg den langsomt, indtil den ønskede lydstyrke opnås uden forvrængning.

4.2 Low-Pass Filter (LPF)

The LPF controls the upper frequency limit of the audio signal sent to the subwoofer. Adjust this to blend the subwoofer's output seamlessly with your full-range speakers.

4.3 basforstærkning

The variable bass boost allows you to increase the bass output at a specific frequency. Use this sparingly to avoid distortion and potential damage to your subwoofer.

4.4-fasekontakt

The phase switch (0°/180°) helps ensure that the subwoofer's output is in phase with the rest of your speakers, providing a more cohesive and impactful bass response.

4.5 RBC Wired Remote

Use the wired remote to conveniently adjust the subwoofer's output level from your driving position.

5. Vedligeholdelse

The Infinity Reference-6001A amplifier requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they are secure and free from corrosion. Do not use harsh chemicals or abrasive cleaners.

6. Fejlfinding

Hvis du oplever problemer med din amplifier, consult the following guide before seeking professional service.

6.1 Protection LED Indicator

De amplifier features an LED indicator that illuminates when the on-board protection circuitry is activated due to shorts, high temperature, overvoltage, eller undervoltage. If the LED is lit, check the following:

• Kortslutning: Inspect speaker wiring for any shorts to ground or between positive and negative terminals.
• Overophedning: Sørg for amplifier has adequate ventilation. Allow the unit to cool down.
• Voltage-problemer: Kontroller køretøjets batterivolumentage is within the operating range (typically 11V-16V).

6.2 Fælles problemer

• Ingen strøm: Check the main fuse, power cable connection, ground connection, and remote turn-on wire.
• Ingen lyd: Verify input signal connections (RCA or speaker level), speaker connections, and amplifier gain settings. Check head unit output.
• Forvrænget lyd: Reduce gain setting, check speaker impedance, and ensure bass boost is not set too high.

Figur 3: Nederst view af amplifier, showing the model and serial number label.

7. Specifikationer

8. Garantioplysninger

Infinity products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Infinity webwebstedet for detaljerede garantioplysninger.

9. Kundesupport

For technical assistance, troubleshooting, or warranty claims, please contact Infinity customer support. You can find contact information on the official Infinity webhjemmeside eller gennem din autoriserede forhandler.

Webwebsted: www.infinityspeakers.com