FLAMMA FS06 Digital Preamp Pedal brugermanual

1. Introduktion

The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.

FLAMMA FS06 Digital Preamp Pedal, a purple guitar pedal with control knobs and a footswitch.

Image 1.1: The FLAMMA FS06 Digital Preamp Pedal.

2. Pakkens indhold

FLAMMA FS06 Digital Preamp Pedal
Hurtig guide
FLAMMA Logo Sticker

FLAMMA FS06 Digital Preamp Pedal next to its retail box, quick guide, and a FLAMMA sticker.

Image 2.1: Contents of the FLAMMA FS06 package.

3. Opsætning og forbindelser

3.1 Strømforsyning

The FS06 pedal requires a 9V DC strømforsyning with a current output of mere end 303mA. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.

3.2 Connecting Your Pedal

The FS06 can be integrated into various audio setups:

To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar amplivligere.
Direct to a Power Amplivligere: Connect the pedal's output directly to a dedicated power amplivligere.
To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.

Side view of the FLAMMA FS06 pedal showing the input jack.

Image 3.1: Input jack of the FS06 pedal.

Side view of the FLAMMA FS06 pedal showing the output jack.

Image 3.2: Output jack of the FS06 pedal.

FLAMMA FS06 pedal connected to a mixer, demonstrating its built-in cabinet simulation feature.

Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.

4. Betjening

4.1 kontroller overview

The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:

BAS: Justerer lavfrekvensresponsen.
MID: Adjusts the middle-frequency response.
TRE (Diskant): Justerer diskantresponsen.
NIVEAU: Styrer den overordnede udgangslydstyrke.
GEVINST: Justerer mængden af overdrive/forvrængning.
SAVE SELECT Button: Used to select preamp models and save presets.
Fodkontakt: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.

Close-up of the FLAMMA FS06 pedal showing the Bass, Mid, Treble, Level, and Gain knobs with their functions labeled.

Image 4.1: Control knobs and their functions.

Close-up of the FLAMMA FS06 pedal showing the footswitch and its dual functionality for on/off and channel switching.

Image 4.2: Footswitch functionality.

4.2 Præamp Modeller

The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.

Table 4.1: Preamp Modeller
Antal	Navn	Amp Model Basis
1	DELUXEBLUE	Based on Fender® Blues Deluxe
2	AC31	Based on Vox® AC30
3	CORAL REEF	Based on Two Rock® Coral
4	PLEX 50	Baseret på Marshall® Plexi 50
5	BLUE EYE 100	Based on Friedman® BE-100
6	MB 5th Gen	Based on Mesa Boogie® MARK V
7	HVE 5151	Based on EVH® 5150

Diagram showing the FLAMMA FS06 pedal and a list of its 7 preamp models with their corresponding amp model inspirations.

Billede 4.3: Overview of the 7 preamp modeller.

4.3 Lagring af forudindstillinger

Hver præamp model has two channels, allowing you to save a unique preset for each. To save your settings:

Select your desired preamp model using the SAVE SELECT button.
Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.

This allows you to recall your customized tones instantly during performance or practice.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your FLAMMA FS06 pedal, follow these maintenance guidelines:

Rensning: Brug en blød, tør klud til at rengøre pedalens yderside. Undgå slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
Opbevaring: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
Håndtering: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts.
Magt: Afbryd altid strømforsyningen, når pedalen ikke er i brug i længere perioder.

6. Fejlfinding

6.1 No Sound or Weak Signal

Tjek strømforsyningen: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
Kabelforbindelser: Verify all audio cables are securely connected to the input and output jacks.
Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your amplifier eller lydgrænseflade.
Bypass-tilstand: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.

6.2 Uventet adfærd

Power Cycle: Disconnect and reconnect the power supply to reset the pedal.
Gendan fabriksindstillinger: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.

7. Specifikationer

Feature	Specifikation
Modelnummer	FS06
Varens vægt	10.5 ounce (0.3 kilo)
Produktdimensioner	2.75 x 1.97 x 4.78 tommer (7 x 5 x 12.1 cm)
Materiale Type	Metal
Strømkilde	Elektrisk med ledning
Voltage	9 volt DC
Signalformat	Digital
Hardware-interface	1/4-tommer lyd
Preamp Modeller	7
Saveable Presets	Yes (2 channels per preamp model)
Kabinetsimulering	Indbygget

8. Garanti og support

For warranty information, technical support, or further inquiries, please visit the official FLAMMA webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

FLAMMA Officiel Webwebsted: Visit the FLAMMA Store on Amazon

FLAMMA FS06