Fire Sense Rectangular Convertible Gas Fire Pit Burner User Manual

Indledning

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Fire Sense Rectangular Convertible Gas Fire Pit Burner. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Fire Sense Rectangular Convertible Gas Fire Pit Burner is designed for use with both Liquefied Petroleum Gas (LPG) and Natural Gas, offering versatility for various outdoor fire pit setups. It features a durable stainless steel construction and an electronic ignition system for convenient use.

Sikkerhedsoplysninger

ADVARSEL:

• Kun til udendørs brug.
• Opbevar eller brug ikke benzin eller andre brændbare dampe og væsker i nærheden af ​​dette eller noget andet apparat.
• Forkert installation, justering, ændring, service eller vedligeholdelse kan forårsage personskade eller ejendomsskade.
• Læs installations-, betjenings- og vedligeholdelsesinstruktionerne grundigt, før du installerer eller servicerer dette udstyr.
• Keep children and pets away from the burner when in operation.
• Sørg for ordentlig ventilation.
• Always turn off the gas supply when the burner is not in use.

Reservedelsliste

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes.

• Rectangular Gas Burner Assembly (Stainless Steel)
• Elektronisk tændingssystem
• Natural Gas (NG) Orifice (for conversion)
• Flame Adjustment Control Valve
• Mounting Hardware (if applicable, typically integrated)

Image: The rectangular gas fire pit burner assembly, highlighting the electronic ignition system, NG gas orifice, and flame adjustment control valve as included components.

Opsætning og installation

This burner is designed for easy installation and is compatible with most rectangular Fire Sense fire pits. For specific compatibility questions, please contact customer service.

1. Udpakning: Tag forsigtigt alle komponenter ud af emballagen. Undersøg for eventuelle skader.
2. Placering: Ensure the fire pit enclosure is on a stable, level surface, away from combustible materials.
3. Placering af brænder: Position the rectangular burner assembly into the designated opening of your fire pit table. Ensure it sits securely.
4. Gas Connection (LPG):
   • Ensure the main gas supply valve is off.
   • Connect the LPG hose from your propane tank to the burner's gas inlet. Tighten all connections securely.
   • Check for leaks using a soapy water solution. Bubbles indicate a leak. Do not operate if a leak is detected.
5. Gas Connection (Natural Gas Conversion):
   • This unit ships LPG-ready. To convert to Natural Gas, a qualified gas technician must install the included Natural Gas (NG) orifice.
   • Ensure the main gas supply valve is off.
   • Connect the natural gas line to the burner's gas inlet. Tighten all connections securely.
   • Check for leaks using a soapy water solution. Bubbles indicate a leak. Do not operate if a leak is detected.
6. Tændingssystem: Install the required battery (not included) into the electronic ignition module.
7. Medieplacering: If using fire glass or lava rocks (not included), distribute them evenly over the burner pan, ensuring not to block the ignition pin or thermocouple.

Image: The Fire Sense rectangular gas burner, ready for installation into a compatible fire pit.

Image: The Fire Sense rectangular gas burner with key dimensions (28.5" x 14" x 2.25") highlighted, useful for ensuring compatibility with your fire pit opening.

Betjeningsvejledning

1. Før tænding: Ensure the area around the fire pit is clear of debris and flammable materials.
2. Åben gasforsyning: Slowly open the main gas supply valve on your propane tank or natural gas line.
3. Tænding:
   • Turn the flame adjustment control knob on the burner to the "LOW" position.
   • Press and hold the electronic ignition button. You should hear a clicking sound and see a spark at the ignition pin.
   • Once the flame ignites, continue to hold the knob for 5-10 seconds to allow the thermocouple to heat up and engage the safety valve.
   • Slip knappen. Hvis flammen slukker, gentag tændingsprocessen.
4. Justering af flamme: Rotate the flame adjustment control knob to increase or decrease the flame height as desired.
5. At slukke: Turn the flame adjustment control knob to the "OFF" position. Then, close the main gas supply valve on your propane tank or natural gas line.

Opretholdelse

• Rensning: Allow the burner to cool completely before cleaning. Use a soft cloth and mild detergent to clean the stainless steel surfaces. Do not use abrasive cleaners.
• Brænderporte: Periodically check burner ports for blockages (e.g., spider webs, debris). Use a soft brush or compressed air to clear them.
• Tændingssystem: Ensure the ignition pin and thermocouple are clean and free of obstructions.
• Opbevaring: When not in use for extended periods, disconnect the gas supply and cover the fire pit to protect the burner from elements.

Fejlfinding

Specifikationer

• Modelnummer: 63180
• Produktdimensioner: 28.5 x 14 x 2.25 tommer
• Varens vægt: 2 pund
• Materiale: Rustfrit stål
• Brændstoftype: Liquefied Petroleum Gas (LPG) / Natural Gas (NG) convertible
• BTU output: 55,000 BTU'er
• Antændelsestype: Battery-operated Electronic Ignition
• UPC: 690730631805
• Fabrikant: Godt rejste Living

Garanti og support

This Fire Sense product comes with a Et års begrænset garantiDenne garanti dækker materiale- og fabrikationsfejl under normal brug og service.

For warranty claims, technical support, or assistance with selecting the correct burner for your Fire Sense fire pit, please contact Fire Sense Customer Service. Please have your model number (63180) and proof of purchase available when contacting support.

For additional information and resources, you may visit the official Fire Sense store: Fire Sense Store