BONTEC Dual Monitor Stand Riser

Indledning

The BONTEC Dual Monitor Stand Riser is designed to enhance your workspace ergonomics and organization. This versatile stand elevates your monitors to an optimal viewing height, reducing strain on your neck and back. Its adjustable length and swivel angles allow for a customized setup, while integrated storage compartments and cable management features help maintain a tidy desk environment.

Image: The BONTEC Dual Monitor Stand Riser in a typical setup, supporting two monitors and providing under-shelf storage.

Sikkerhedsoplysninger

• Ensure all components are securely fastened before placing monitors or other items on the stand.
• Overskrid ikke den maksimale lastekapacitet på 20 kg.
• Placer stativet på en stabil, plan overflade for at forhindre, at det vælter.
• Hold små dele væk fra børn for at undgå kvælningsfare.
• Avoid exposing the stand to excessive moisture or direct sunlight.

Pakkens indhold

Kontroller venligst, at alle følgende komponenter er inkluderet i din pakke:

• Monitor Stand (Engineered Wood components)
• Monteringsskruer
• Dyvelstifter
• Skruetrækker (til montering)
• Skridsikre puder
• Cable Management Clip

Opsætning

Assembly of the BONTEC Dual Monitor Stand Riser is straightforward and typically takes about 3 minutes. Follow these steps:

1. Forbered komponenter: Lay out all wooden panels, screws, and dowel pins. Identify the main center section and the two adjustable side sections.
2. Assemble Side Sections: For each side section, insert the dowel pins into the pre-drilled holes on the bottom panel. Align the side panels with the dowel pins and screw holes. Secure the side panels to the bottom panel using the provided screws and screwdriver.


Image: Step-by-step visual guide for assembling the monitor stand sections using screws and dowel pins.

3. Forbind sektioner: Once the two side sections are assembled, position them on either side of the central section. The design allows for adjustable length and angle.
4. Apply Non-slip Pads: Attach the provided non-slip pads to the bottom of each stand section to prevent scratching your desk surface and ensure stability.


Image: Detail of the non-slip pads on the bottom of the stand, designed to protect your desk.

Videovejledning til montering

Betjening af stativet

The BONTEC Dual Monitor Stand Riser offers several features for an optimized workspace:

• Justerbar længde: The stand's length can be adjusted from 31.5 inches to 42.5 inches by sliding the side sections. This allows it to fit various desk sizes and accommodate different monitor setups.
• Drejevinkel: The two side sections can be swiveled to create a straight, angled, or V-shaped configuration, providing flexibility for your viewing preference and desk layout.
• Ergonomisk højde: By raising your monitors to eye level, the stand helps to reduce neck, back, and shoulder strain, promoting a healthier posture during long periods of use.
• Integreret opbevaring: Utilize the space underneath the stand to store your keyboard, mouse, laptop, files, or other office essentials, keeping your desktop clear and organized.
• Smartphone holder: A dedicated slot is provided to hold your smartphone upright for easy viewing og adgang.
• Kabelstyring: An opening and included clip assist in routing and organizing cables, preventing clutter and tangles.

Image: Illustrations demonstrating the adjustable length and swivel angle capabilities of the stand.

Image: Visual comparison of posture before and after using the ergonomic monitor stand.

Billede: Nærbillede views of the integrated smartphone holder and cable management system.

Produktfunktioner Video

Opretholdelse

To ensure the longevity and appearance of your BONTEC Dual Monitor Stand Riser, follow these simple maintenance guidelines:

• Rensning: Tør overfladen af ​​med en blød, damp klud. Til genstridige pletter kan en mild sæbeopløsning bruges, efterfulgt af tørring med en ren klud. Undgå slibende rengøringsmidler eller barske kemikalier.
• Støvning: Regularly dust the stand to prevent accumulation, which can dull the finish.
• Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastspændte. Efterspænd om nødvendigt.
• Undgå overbelastning: Do not place items heavier than the specified load capacity on the stand.

Image: The stand's surface is easy to clean with a damp klæde.

Fejlfinding

Hvis du støder på problemer med din skærmstander, kan du bruge følgende almindelige løsninger:

• Stativet er vakkelvornt: Ensure all assembly screws are fully tightened. Check that the stand is placed on a flat, stable surface. Verify that the non-slip pads are correctly applied to all contact points.
• Difficulty Adjusting Length/Angle: Ensure no objects are obstructing the sliding or swiveling mechanism. Apply gentle, even pressure when adjusting.
• Scratches on Desk: Confirm that the non-slip pads are properly installed and intact. If pads are worn, contact customer support for replacements.
• Items Sliding Off: Ensure the stand is level and not tilted. Do not overload the stand beyond its weight capacity.

Specifikationer

Garanti og support

BONTEC products are designed for durability and user satisfaction. For specific warranty details, please refer to the product packaging or contact BONTEC customer support.

For additional assistance, troubleshooting, or to download the full installation manual, please visit the official BONTEC webwebsted eller se det medfølgende PDF-dokument:

• Officiel brugervejledning (PDF): Download installationsmanual
• BONTEC Store: Visit the BONTEC Store on Amazon