Yanzeo SR691 UHF RFID Reader Instruction Manual

1. Produktet er slutview

The Yanzeo SR691 is a high-performance UHF RFID integrated reader designed for long-distance identification applications. It features a 9dBi antenna and supports a reading distance of 3-8 meters. The reader is built with an IP67 rating, making it suitable for outdoor environments. It offers multiple communication interfaces including RS232, RS485, and Wiegand, ensuring versatile integration into various systems. This device supports ISO18000-6C/EPC Gen2 and ISO18000-6B protocols, operating within the wide frequency band of 860-960MHz.

Figur 1: Forside view of the Yanzeo SR691 UHF RFID Reader with approximate dimensions (26cm x 26cm x 3.2cm).

2. Pakkens indhold

Før du fortsætter installationen, skal du kontrollere, at alle nedenstående varer er til stede i din pakke:

• Yanzeo SR691 UHF RFID Reader
• Strømadapter
• Monteringsbeslag og skruer
• USB to RS232/RS485 Converter Cable
• Ledningsklemmeblok

Figure 2: Included components: RFID reader, power adapter, mounting hardware, and connection cables.

3. Opsætningsvejledning

3.1. Fysisk forbindelse

1. Tilslut strøm: Connect the provided power adapter to the reader's power input port. Ensure the power source matches the reader's voltage krav.
2. Connect to Computer (for configuration): Use the USB to RS232/RS485 converter cable to connect the reader to your computer's USB port. This connection is typically used for initial setup and software configuration.
3. Montering (valgfrit): Secure the reader using the provided mounting bracket and screws in the desired location. Ensure the antenna has a clear line of sight to the area where RFID tags vil blive læst.

3.2. Driver installation

After connecting the reader to your computer, you may need to install the appropriate USB-Serial driver. This driver is usually provided on a CD with the product or can be downloaded from the manufacturer's website. Once installed, verify the assigned COM port in your computer's Device Manager.

4. Betjeningsvejledning

4.1. Softwarekonfiguration

Use the provided RFID Demo software for configuration and testing. The software interface allows you to manage reader settings and perform tag operationer.

1. Sprogvalg: In the software, navigate to the 'Language' menu and select 'English' for easier operation.
2. Portforbindelse: Go to the 'Connect' tab. Select 'Serial Interface' and choose the correct COM port identified in Device Manager (e.g., COM3). Click 'Connect' to establish communication with the reader.
3. Card Type Selection: In the 'Base Settings' or 'EPC(GEN 2) Read&Write' tab, select the appropriate 'Card Type'. Options typically include 'EPCGEN 2 Multi-Tag', 'ISO18000-6B', or 'EPCGEN 2 Single-Tag', depending on the tags du bruger.
4. Frekvensindstillinger: Adjust the hopping value based on your region. The software provides options for 'China', 'America', and 'Europe', which set the frequency range accordingly (e.g., America: 902.0 - 928.0 MHz, Europe: 860.0 - 870.0 MHz).
5. Buzzer kontrol: The buzzer can be enabled or disabled in the settings.
6. Trigger -tilstand: Select 'Low Trigger' for continuous reading or 'Close' for manual triggering.

4.2. Reading RFID Tags

Once the reader is connected and configured:

1. Navigate to the 'Read Demo' tab in the software.
2. Click 'Start Reading Tags' to begin the tag identification process.
3. Placer RFID tags within the reading range of the SR691 reader. The software will display the identified tag data (e.g., EPC, Hex Card) in a list.
4. The 'Count' and 'Sum' fields will update to show the number of unique tags and total reads, respectively.

Figur 3: Tilbage view of the RFID reader, showing the mounting points and cable entry.

5. Vedligeholdelse

To ensure optimal performance and longevity of your Yanzeo SR691 UHF RFID Reader, follow these maintenance guidelines:

• Rensning: Regularly clean the exterior of the reader with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the casing.
• Miljøbeskyttelse: Although the device has an IP67 rating for outdoor use, avoid prolonged exposure to extreme weather conditions or direct water immersion.
• Kabelinspektion: Periodically check all cables for any signs of wear, damage, or loose connections. Replace damaged cables immediately.
• Firmwareopdateringer: Tjek producentens webwebstedet for tilgængelige firmwareopdateringer. Følg de medfølgende instruktioner omhyggeligt for eventuelle opdateringsprocedurer.

6. Fejlfinding

If you encounter issues with your Yanzeo SR691 UHF RFID Reader, refer to the following common troubleshooting steps:

• Reader Not Powering On: Ensure the power adapter is securely connected to both the reader and a functional power outlet. Check the power indicator light on the reader.
• No Connection to Software: Verify that the USB-Serial driver is correctly installed and the correct COM port is selected in the software. Try restarting the software and reconnecting the USB cable.
• Kan ikke læse Tags:
  • Sikre tags are within the optimal reading range and orientation.
  • Check that the correct 'Card Type' (e.g., EPCGEN 2 Multi-Tag) is selected in the software.
  • Verify that the frequency settings match your region.
  • Confirm that the 'Trigger Mode' is set appropriately (e.g., 'Low Trigger' for continuous reading).
  • Ensure there are no metallic obstructions or sources of interference near the reader or tags.
• Inconsistent Reads: This could be due to environmental interference, incorrect power settings, or tags being too close or too far from the reader. Adjust power settings in the software if applicable.

If the issue persists after following these steps, please contact technical support.

7. Specifikationer

8. Garanti og support

The Yanzeo SR691 UHF RFID Reader comes with a 6-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.

For technical assistance, troubleshooting, or warranty claims, please contact Yanzeo customer support through the official webwebstedet eller dit købssted. Hav venligst din produktmodel og købsoplysninger klar, når du kontakter support.