1. Introduktion
The Fender Tone Master Twin Reverb Guitar Amplifier is a state-of-the-art digital amplifier designed to faithfully replicate the classic tone and feel of a '60s-era all-tube Twin Reverb. This model, finished in a distinctive Blonde vinyl with an Oxblood grille, features ultralight Celestion neodymium-magnet speakers, offering significant weight savings without compromising on authentic Fender sound. It is equipped with a 5-way power attenuator for versatile wattage reduction, making it suitable for various playing environments from studio to stage.
Figur 1.1: Forside view of the Fender Tone Master Twin Reverb Guitar Amplifier in Blonde finish. The amplifier features a light blonde textured vinyl covering, a dark brown grille cloth, and chrome hardware. The control panel at the top includes various knobs and switches for sound adjustment, and the Fender logo is prominently displayed on the grille.
2. Opsætning
2.1 Udpakning og inspektion
- Fjern forsigtigt ampfjerner fra emballagen.
- Undersøg amplifier for any signs of damage that may have occurred during shipping. If damage is found, contact your dealer immediately.
- Gem de originale emballagematerialer til senere transport eller opbevaring.
2.2 Placering
Placer ampPlacer apparatet på en stabil, plan overflade. Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning. Undgå at placere amplifier near heat sources or in direct sunlight.
2.3 Strømtilslutning
- Sørg for ampstrømafbryderen er i SLUKKET position.
- Tilslut det medfølgende netkabel til amplifier's IEC power inlet on the rear panel.
- Sæt den anden ende af netledningen i en jordet stikkontakt med den korrekte lydstyrke.tage for your region. Refer to the amplifier's rear panel for voltage krav.
2.4 Instrumenttilslutning
Tilslut din guitar eller et andet instrument til INDGANG 1 or INDGANG 2 jack on the front panel using a standard 1/4-inch instrument cable. The Tone Master Twin Reverb features two channels: Normal and Vibrato.
3. Betjening
3.1 Tænd/sluk
- To power on, flip the MAGT skifte til ON position. The pilot light will illuminate.
- To power off, flip the MAGT skifte til SLUKKET position.
3.2 Betjeningselementer på frontpanelet
The front panel provides access to all primary sound shaping controls. The amplifier features two independent channels: Normal and Vibrato.
Normal Channel Controls:
- INPUT 1 & 2: 1/4-inch input jacks for connecting your instrument. Input 1 has higher sensitivity.
- BRIGHT-knap: Engages a bright tone circuit for added high-end sparkle.
- BIND: Styrer det samlede udgangsniveau for Normal-kanalen.
- DISKANT: Justerer diskantresponsen.
- I midten: Justerer frekvensresponsen i mellemområdet.
- BAS: Justerer lavfrekvensresponsen.
Vibrato Channel Controls:
- INPUT 1 & 2: 1/4-inch input jacks for connecting your instrument. Input 1 has higher sensitivity.
- BRIGHT-knap: Engages a bright tone circuit for added high-end sparkle.
- BIND: Controls the overall output level of the Vibrato channel.
- DISKANT: Justerer diskantresponsen.
- I midten: Justerer frekvensresponsen i mellemområdet.
- BAS: Justerer lavfrekvensresponsen.
- REVERB: Styrer intensiteten af den indbyggede spring reverb-effekt.
- HASTIGHED: Adjusts the rate of the vibrato effect.
- INTENSITET: Adjusts the depth of the vibrato effect.
3.3 Bagpanelfunktioner
- POWER ATTENUATOR: A 5-way switch that allows you to reduce the ampforsyningens output watttage for lower volume playing while maintaining tone. Settings typically include full power, and attenuated levels like 50W, 22W, 12W, 5W, and 1W.
- XLR LINE OUT: Balanced XLR output for connecting to a mixing console or recording interface. Includes options for cabinet simulation.
- USB-port: Til firmwareopdateringer og potentiel fremtidig funktionalitet.
- FODKONTAKT Jack: For connecting an optional footswitch to control Reverb and Vibrato effects.
4. Vedligeholdelse
4.1 Rengøring
For at rense ampBrug en blød, tør klud til at fjerne genstridigt snavs. Til genstridigt snavs, brug en let tør klud.amp cloth can be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2 Opbevaring
Når den ikke er i brug i længere perioder, skal den opbevares amplifier in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to cover the ampbeskyttelsesfilm for at beskytte den mod støv.
4.3 Speaker Care
The Celestion Neo G12 Creamback speakers are designed for durability. Avoid poking or pressing on the speaker cones, as this can cause damage. If the grille cloth becomes dirty, gently brush it with a soft brush or use a vacuum cleaner with a brush attachment.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd | Power not connected; Volume knob set to zero; Instrument cable faulty; Speaker cable disconnected (if applicable). | Check power connection and outlet; Increase volume; Test with a different instrument cable; Ensure speaker connections are secure. |
| Forvrænget lyd | Indgangssignalet er for højt; Amplifier volume too high; Faulty instrument or cable. | Reduce instrument output or amplifier input gain; Lower amplifier volume; Test with a different instrument/cable. |
| Brummen eller støj | Ground loop; Faulty cable; Interference from other electronic devices. | Try a different power outlet; Use shielded cables; Move ampfjernbetjeningen væk fra anden elektronik. |
| Effects (Reverb/Vibrato) not working | Effect level set to zero; Footswitch not connected or faulty. | Increase Reverb/Intensity/Speed knobs; Check footswitch connection and functionality. |
If the problem persists after attempting these solutions, please contact Fender customer support or an authorized service center.
6. Specifikationer
- Modelnavn: Tone Master Twin Reverb Guitar Amplifier, Blonde
- Modelnummer: 2274200982
- Serie: Tone Master
- Amplivligere Type: Digital
- Output Wattage: 200 Watts (simulated 85W tube amp power) with 5-way attenuator
- Højttalere: 2 x 12" Celestion Neo G12 Creamback
- Kanaler: To (Normal og Vibrato)
- Effekter: Reverb, Vibrato
- Skabsmateriale: Lightweight Solid Pine
- Dækker: Blonde Textured Vinyl
- Grill klud: Oxblood
- Produktdimensioner: 2 x 12 x 200 tommer
- Vægt: 33 pund (14.97 kg)
- Forbindelse: 1/4" Instrument Inputs, XLR Line Out with Impulse Response (IR) cabinet simulations, USB port for firmware updates, Footswitch jack.
7. Garanti og support
7.1 Garantioplysninger
Fender products are covered by a limited warranty. For detailed information regarding the warranty period and coverage for your Tone Master Twin Reverb amplifier, please refer to the warranty card included with your product or visit the official Fender webwebsted. Gem din købsbevis til garantikrav.
7.2 Kundesupport
For technical assistance, service, or parts, please contact Fender customer support. You can find contact information and frequently asked questions on the official Fender webwebsted:
Additionally, a PDF user manual is available for download: