1. Introduktion
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. Opsætning
2.1. Udpakning
Fjern forsigtigt amplifier from its packaging. Retain all packaging materials for future transport or storage. Inspect the amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. Tænd og opladning
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. Connecting Instruments and Microphones
De amplifier features two independent channels:
- Channel 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- Channel 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
Sørg for, at alle forbindelser er sikre, før du tænder for amplivligere.
3. Betjeningsvejledning
3.1. Kanalkontroller
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. Bluetooth-parring
To stream audio wirelessly from a phone or tablet:
- Aktiver Bluetooth på din mobilenhed.
- Press the Bluetooth pairing button on the amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the amplivligere.
3.3. Looper-funktion
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- Afspil/stop: Press once to play the loop. Press again to stop.
- Fortryd: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
De amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. Vedligeholdelse
4.1. Rensning
For at rense ampBrug en blød, tør klud til at fjerne genstridigt snavs. Til genstridigt snavs, brug en let tør klud.amp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. Opbevaring
Opbevar amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. Batteripleje
To maximize the life of the lithium-ion battery:
- Undgå at aflade batteriet helt regelmæssigt.
- Udsæt ikke ampopvarmer til ekstrem varme eller kulde.
- Hvis amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. Fejlfinding
This section addresses common issues you might encounter with your Fender Acoustic Junior GO amplivligere.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | Volume controls are low; cables are not connected properly; instrument/microphone issue; ampLifieren er ikke tændt. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm ampLifieren er tændt og opladet. |
| Bluetooth ikke parring | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the amplivligere. |
| Looper optager/afspiller ikke | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| Forvrænget lyd | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | Acoustic Junior GO |
| Modelnummer | 2314400000 |
| Mærke | Fender |
| Output Wattage | 100 watt |
| Produktdimensioner | 16 x 20 x 16 tommer (højde x bredde x dybde) |
| Varens vægt | 20.6 pund |
| Batteritype | Genopladelig lithium-ion |
| Batterilevetid | Up to 5 hours (full volume), 12 hours (moderate volume) |
| Forbindelse | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| Looper | 90-second with Record/Dub, Play/Stop, Undo |
| Voltage | Universal voltage til global brug |
7. Garanti og support
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender webwebstedet eller kontakt Fender kundeservice. Gem din købsbevis til garantikrav.
Online support: www.fender.com/support