1. Introduktion
The PoolCandy Splash Runner Motorized Pool Lounger is designed to provide a unique and relaxing experience in the water. Featuring motorized propulsion, this lounger allows for effortless movement and maneuverability in pools or calm lake environments.
Nøglefunktioner:
- Motorized pool lounger allows you to drive, spin & turn in the pool using dual 66-watt motors activated at the touch of a button.
- Newly designed propellers supply more torque for 20% increase in speed with superior maneuverability.
- Made with durable 0.35mm PVC material that holds up to 300 pounds.
- Assembles in minutes without tools.
- Fully enclosed propellers provide safety.
- Includes deluxe repair patch kit.
2. Sikkerhedsoplysninger
For safe operation of the PoolCandy Splash Runner, please adhere to the following guidelines:
- Youngsters should use the product under an adult's supervision.
- Do not use in rough waters or strong currents.
- Ensure all battery compartments are securely sealed before entering water.
- Overskrid ikke den maksimale vægtgrænse på 300 pund.
- Keep hair, loose clothing, and other objects away from propellers during operation.
3. Opsætning
Udpakning og første inspektion
Carefully remove all components from the packaging. Inspect the lounger and all parts for any signs of damage. Ensure all listed components are present.
Image: Unboxed components of the Splash Runner.
Installation af batteri
The Splash Runner requires 6 D-Cell batteries (not included). Locate the battery compartments on each motor unit. Insert 3 D-Cell batteries into each compartment, ensuring correct polarity. Securely close the battery compartment covers to ensure a watertight seal.
Image: Battery installation into the motor unit.
Inflation
Inflate the lounger using an air pump (not included). The lounger is made with durable 0.35mm PVC material. Ensure the lounger is fully inflated until firm, but do not over-inflate. Securely close all air valves.
Image: Inflated lounger ready for use.
4. Betjeningsvejledning
Kontrolelementer
The Splash Runner features dual 66-watt motors, each controlled by an independent joystick located on the armrests. Push the joystick forward for forward motion, and pull backward for reverse. The red button on top of the joystick activates the motor.
Image: Detail of the control joysticks.
Movement and Maneuvering
To move forward, push both joysticks forward. To move backward, pull both joysticks backward. For 360-degree turns, push one joystick forward and pull the other backward. The newly designed propellers offer superior maneuverability and a 20% increase in speed.
Image: Operating the lounger in the pool.
Officiel produktvideo
Video: Demonstrates the setup and operation of the PoolCandy Splash Runner Motorized Pool Lounger, showcasing its features and ease of use in a pool environment.
5. Vedligeholdelse
Rengøring og opbevaring
After each use, rinse the lounger with fresh water and allow it to air dry completely before deflating. Store the lounger in a cool, dry place away from direct sunlight and sharp objects. The durable PVC material allows for easy cleaning and compact storage.
Reparation
A deluxe repair patch kit is included with your Splash Runner. In case of a small puncture, clean the affected area, apply the patch according to the kit instructions, and allow sufficient time for it to cure before re-inflating.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren kører ikke | Low or dead batteries; Incorrect battery installation; Loose electrical connection. | Replace batteries; Ensure correct polarity; Check and secure all electrical connections. |
| Lounger deflating | Air valve not securely closed; Puncture in PVC material. | Ensure all air valves are tightly sealed; Locate puncture and use the included repair patch kit. |
| Reduceret hastighed eller kraft | Low batteries; Obstruction in propellers. | Replace batteries; Check propellers for any debris and safely remove. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Dimensioner (L x B) | 66 tommer x 43 tommer (167.6 cm x 109.2 cm) |
| Varens vægt | 14 pund (6.35 kg) |
| Materiale | 0.35mm PVC |
| Vægtgrænse | 300 pund (136 kg) |
| Motorkraft | Dual 66-watt motors |
| Batterikrav | 6 D-Cell batteries (not included) |
| Aldersinterval | Teen, Adult |
8. Garanti og support
Garantioplysninger
Dive into worry-free poolside bliss with the Splash Runner Motorized Pool Lounger with a worry-free one-year warranty, delivering unrivaled confidence in your purchase by B&D Group.
Kundesupport
For any questions, concerns, or warranty claims, please contact Poolcandy customer support through their official website or the retailer where the product was purchased. Please have your model number and purchase date available for faster service.