ANMEATE Blood Pressure Monitor

1. Sikkerhedsoplysninger

Please read this instruction manual thoroughly before using the ANMEATE Blood Pressure Monitor. Keep this manual for future reference.

• Denne enhed er kun beregnet til brug for voksne.
• Brug ikke denne enhed på spædbørn, børn eller personer, der ikke kan give deres samtykke.
• Consult your physician before using this device if you have any medical conditions, especially if you are pregnant or have a pacemaker.
• Self-measurement is not diagnosis. Always consult a healthcare professional for interpretation of results.
• Forsøg ikke selv at reparere eller ændre enheden. Overlad al service til kvalificeret personale.
• Hold apparatet og manchetten væk fra vand og ekstreme temperaturer.

2. Produktet er slutview

The ANMEATE A-30B Blood Pressure Monitor is an automatic upper arm device designed for convenient and accurate blood pressure measurement at home. It features a large LCD screen, dual user memory, and irregular heartbeat detection.

Figur 2.1: Forside view of the ANMEATE Blood Pressure Monitor with cuff.

2.1 Nøglefunktioner

• Nøjagtig måling: Provides reliable systolic, diastolic, and pulse readings.
• Stor LCD-skærm: Easy-to-read display for clear results.
• Dual User Memory: Stores 99 sets of readings for two users (total 198 records).
• Registrering af uregelmæssig hjerterytme: Alerts users to potential arrhythmia.
• Cuff Self-checking Function: Ensures proper cuff placement.
• Dobbelt strømforsyning: Operates on 4 AAA batteries or USB Type-C.

Figure 2.2: Visual representation of key features including accurate measurement, FDA approval, large LCD screen, USB power supply, date and time, arrhythmia checking, double user memory, and cuff self-checking function.

2.2 Displayindikatorer

Familiarize yourself with the symbols and information displayed on the screen:

Figure 2.3: Labeled diagram of the monitor's display, showing icons for user, inflation, deflation, memory, pulse, cuff wrapping, low battery, pressure unit, irregular heartbeat, and average value.

• SYS (mmHg): Systolic blood pressure.
• DIA (mmHg): Diastolic blood pressure.
• PULSE (/min): Hjertefrekvens i slag pr. minut.
• User Icon: Indicates which user's data is displayed (User 1 or User 2).
• Memory Icon: Vises når viewing stored readings.
• Irregular Heartbeat Icon: Indicates detection of an irregular heartbeat during measurement.
• Ikon for lavt batteri: Vises, når batterierne skal udskiftes.
• Blood Pressure Classification Bar: Visual indicator of blood pressure level (Normal, Mild High, High).

3. Opsætning

3.1 Strømforsyning

The monitor can be powered by 4 AAA batteries or a USB Type-C cable.

Figure 3.1: Illustration of the dual power supply modes: 4 AAA dry batteries and Type-C USB plug-in.

Brug af batterier:

1. Åbn batterirummets dæksel på bagsiden af ​​enheden.
2. Isæt 4 AAA-batterier, og sørg for at polerne vender korrekt (+/-).
3. Luk batterirummets dæksel forsvarligt.

Using USB Type-C:

1. Connect one end of the USB Type-C cable to the monitor's port.
2. Connect the other end to a compatible USB power adapter (not included) or a computer USB port.

Note: When using USB power, batteries are not required. Remove batteries if the device will not be used for an extended period.

3.2 Indstilling af dato og klokkeslæt

Accurate date and time settings are crucial for tracking your measurements. Refer to the device's display and buttons (SET/MEM) to navigate and adjust these settings. Typically, press the 'SET' button to enter setting mode and use 'MEM' to adjust values, then 'SET' again to confirm and move to the next setting.

4. Betjeningsvejledning

4.1 Før måling

• Undgå at spise, drikke alkohol, ryge, motionere og bade i 30 minutter før måling.
• Hvil i mindst 5 minutter, før du foretager en måling.
• Sid oprejst med ryggen støttet og fødderne fladt i gulvet. Kryds ikke benene.
• Placer din arm på et bord, så manchetten er i hjertehøjde.

4.2 Påsætning af manchetten

Figure 4.1: Step-by-step guide on how to wear the cuff correctly, close the cuff, position the arm, and start the measurement.

1. Wear the Cuff Correctly: Slide your left arm through the cuff loop. The air tube should run down the inside of your arm. The bottom edge of the cuff should be approximately 0.5 to 1 inch (1 to 2 cm) above your elbow joint.
2. Close the Cuff: Wrap the cuff snugly around your upper arm. Ensure it is not too tight or too loose. The cuff should fit comfortably.
3. Arm Placement Position: Rest your arm on a flat surface, such as a table, with your palm facing upwards. The cuff should be at the same level as your heart.

4.3 Tage en måling

1. Ensure the cuff is correctly applied and your arm is positioned as described above.
2. Press the 'ON/OFF' button to start the measurement. The cuff will automatically inflate.
3. Remain still and silent during the measurement. Do not talk or move.
4. Når målingen er færdig, vil manchetten tømmes for luft, og dine systoliske, diastoliske og pulsaflæsninger vil blive vist på skærmen.
5. Enheden gemmer automatisk aflæsningen i den valgte brugers hukommelse.

4.4 Understanding Your Results

The monitor provides a visual classification of your blood pressure readings based on standard guidelines:

Figure 4.2: Intelligent indicator showing normal, mild high pressure/hypotension, and red for high pressure readings with corresponding color codes.

• Grøn: Normal blood pressure.
• Orange: Mild high pressure or hypotension.
• Rød: Højt blodtryk.

Consult your doctor for a complete interpretation of your blood pressure readings.

4.5 Hukommelsesfunktion

The device supports two users, each with 99 memory slots. To switch between users or view tidligere aflæsninger:

Figure 4.3: Image illustrating the double user 99 sets memory feature of the blood pressure monitor.

• Press the 'MEM' button to access memory mode.
• Press 'MEM' repeatedly to scroll through past readings for the current user.
• To switch users, typically press and hold the 'SET' button while in memory mode, or refer to the specific instructions in your quick start guide.

5. Vedligeholdelse

5.1 Rengøring

• Tør monitoren og manchetten af ​​med en blød, tør klud.
• Brug om nødvendigt en let kludampened with water or a mild detergent, then wipe dry immediately.
• Do not use abrasive cleaners, alcohol, or organic solvents.

5.2 Opbevaring

• Opbevar enheden på et rent, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Hvis de ikke er i brug i længere tid, skal batterierne fjernes for at forhindre lækage.
• Do not fold the cuff too tightly or twist the air tube.

6. Fejlfinding

If you encounter issues with your ANMEATE Blood Pressure Monitor, refer to the table below for common problems and solutions.

Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte kundesupport.

7. Specifikationer

8. Garanti og support

ANMEATE products are manufactured with high-quality materials and are thoroughly inspected before shipment. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase.

For warranty claims, technical support, or any questions regarding the operation of your blood pressure monitor, please contact ANMEATE customer service through the retailer where you purchased the product or visit the official ANMEATE webwebsted for kontaktoplysninger.

Please have your model number (A-30B) and proof of purchase ready when contacting support.