Hansong A-white With Bluetooth-32x23in

Hansong Vanity Mirror with Lights and Bluetooth

Model: A-white With Bluetooth-32x23in

Brand: Hansong

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Hansong Vanity Mirror with Lights and Bluetooth. This extra-large Hollywood-style makeup mirror features 18 LED bulbs, three color lighting modes, USB charging capabilities, and integrated Bluetooth speakers for an enhanced user experience. Please read this manual thoroughly before use to ensure proper functionality and safety.

Sikkerhedsoplysninger

Image showing a comparison between ordinary glass shattering and tempered glass remaining intact, highlighting the safety feature of the Hansong mirror.

Figure 1: Tempered Glass for Enhanced Safety

Pakkens indhold

Kontroller, at alle komponenter er til stede og i god stand, når du åbner pakken:

Opsætning

Installation af bordplader

  1. Carefully remove the mirror from its packaging.
  2. Locate the screws at the bottom of the mirror frame. Unscrew them if they are pre-installed.
  3. Align the holes in the detachable base with the corresponding holes at the bottom of the mirror.
  4. Insert and tighten the screws to secure the base firmly to the mirror.
  5. Placer det samlede spejl på en stabil, plan overflade.
  6. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.
Diagram showing three steps for tabletop mirror assembly: unscrewing, aligning base, and tightening screws.

Figure 2: Tabletop Installation Steps

Vægmontering

The mirror is designed with two back holes for wall mounting. Ensure the wall can support the mirror's weight (approximately 18.08 pounds). Professional installation is recommended for wall mounting.

  1. Identify the desired location on the wall. Ensure it is a sturdy surface.
  2. Measure the distance between the two mounting holes on the back of the mirror.
  3. Mark the corresponding points on the wall using a pencil and a level to ensure horizontal alignment.
  4. Drill pilot holes at the marked locations. Insert wall anchors if necessary (e.g., for drywall).
  5. Screw the provided mounting hardware (screws) into the wall, leaving a small portion protruding to hang the mirror.
  6. Carefully lift the mirror and align the back holes with the screws on the wall. Gently lower the mirror until it is securely seated.
  7. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.
Diagram showing mirror dimensions and options for tabletop stand or wall mount installation.

Figure 3: Mirror Dimensions and Installation Options

Betjeningsvejledning

1. Power On/Off and Lighting Modes

The mirror features touch-sensitive controls located on the mirror surface.

Image showing the three color lighting modes: Cold Light, Natural Light, and Warm Light, with examples of suitable makeup types.

Figure 4: Three Color Lighting Modes

Image demonstrating dimmable lights with a slider from 'Sofe light' to 'Cold light' and touch controls on the mirror.

Figur 5: Lysstyrkejustering

2. Bluetooth-forbindelse

The mirror is equipped with two Bluetooth speakers and a microphone, allowing you to play music and answer calls.

  1. Ensure the mirror is powered on.
  2. Activate Bluetooth on your smartphone or other Bluetooth-enabled device.
  3. Søg efter available Bluetooth devices. The mirror will appear as "Hansong Mirror" or similar.
  4. Select the mirror from the list to pair. A confirmation sound will indicate successful pairing.
  5. Once paired, you can play audio through the mirror's speakers and use the integrated microphone for calls.
Image showing a hand pointing to a Bluetooth icon on the mirror, with a smartphone displaying music playback, indicating connection to the mirror's speakers.

Figure 6: Connecting to Bluetooth Speakers

3. USB -opladningsport

A USB output charging port is located on the side of the mirror, allowing you to charge your phone or other USB-powered devices.

Close-up image of the mirror's side showing a USB port with a charging cable connected to a smartphone.

Figure 7: USB Output Charging Port

4. 10X Magnifying Mirror

The included 10X magnifying mirror is detachable and features suction cups for easy attachment to the main mirror or any smooth surface. It is useful for detailed tasks such as eyebrow plucking or precise eye and lip makeup application.

Image showing the 10X magnifying mirror with suction cups, alongside close-ups of eye and lip makeup application.

Figure 8: 10X Magnifying Mirror

Opretholdelse

Fejlfinding

ProblemMulig årsagLøsning
Spejllysene tændes ikke.
  • Netledningen er ikke sat ordentligt i.
  • Stikkontakten fungerer ikke.
  • Touch sensor not responding.
  • Ensure the power cord is fully inserted into both the mirror and the wall outlet.
  • Test stikkontakten med en anden enhed.
  • Gently tap the touch sensor. If unresponsive, unplug and re-plug the mirror.
Bluetooth will not connect.
  • Bluetooth på enheden er slået fra.
  • Mirror is not in pairing mode or already connected to another device.
  • Device is too far from the mirror.
  • Sørg for, at Bluetooth er aktiveret på din enhed.
  • Turn the mirror off and on again. Disconnect from other devices if necessary.
  • Move your device closer to the mirror (within 30 feet/10 meters).
USB-opladning virker ikke.
  • Mirror is not powered on.
  • USB-kablet er defekt.
  • Device is not compatible or drawing too much power.
  • Ensure the mirror is plugged in and powered on.
  • Prøv et andet USB-kabel.
  • Sørg for, at din enhed er kompatibel med standard USB-opladning.

Specifikationer

MærkeHansong
ModelA-white With Bluetooth-32x23in
Produktdimensioner23 cm L x 32 cm B
RammematerialeMetal
MonteringstypeBord-/vægmontering
Særlige funktionerLighted, Touch Sensor, USB Charging, Bluetooth Speakers
Belysningstilstande3 Color (Warm, Cool, Natural)
Forstørrelse10X (detachable mirror)
Varens vægt18.08 pund
UPC194230337378

Garanti og support

Hansong is committed to providing high-quality products. While the mirror is designed for durability with tempered glass, unforeseen issues may occur.

For any product-related inquiries, technical support, or warranty claims, please contact Hansong customer service directly. Please have your purchase details and model information ready when contacting support.

Contact information can typically be found on the Hansong official webwebstedet eller gennem dit købssted.

Relaterede dokumenter - A-white With Bluetooth-32x23in

Preview LED Hollywood-spejl i brugsanvisning
Brugsanvisning til LED Hollywood-spejlet med detaljerede oplysninger om funktioner, betjening, sikkerhedsforanstaltninger og FCC-overholdelse. Inkluderer trådløs opladning og Bluetooth-forbindelse.
Preview Hvidt makeup-bord med oplyst spejl og glasplade, monteringsvejledning
Omfattende samlevejledning til DIYSET White Makeup Vanity Desk med oplyst spejl, glasplade og 3-farvet LED-lys. Indeholder trinvise instruktioner, hardwareliste og sikkerhedstips til model dfse1000 / NGSZT009.
Preview KEONJINN Hollywood Vanity Mirror installationsvejledning og funktioner
Omfattende installationsvejledning og nøglefunktioner til KEONJINN Hollywood Vanity Mirror, inklusive modeloplysninger, funktionsbeskrivelser og monteringsvejledninger.
Preview DRIPEX DP364-A Makeupspejl Brugermanual
Brugermanual til DRIPEX DP364-A makeupspejl, der dækker montering, betjening, sikkerhedsadvarsler, vedligeholdelse og FCC-overholdelsesoplysninger.
Preview FAMAPY Sminkebord med Spejl og Lys - Samlevejledning
Omfattende samlevejledning til FAMAPY Vanity Desk med spejl og lys, inklusive stykliste, trinvis vejledning og vigtige sikkerhedsadvarsler. Denne vejledning dækker KF210096-01-modellen.