Indledning
The JJC BR-E1 Wireless Bluetooth Remote Control is designed for select Canon cameras, offering convenient remote operation. This remote functions as a replacement for the Canon BR-E1 wireless remote control, providing various shooting modes and camera control from a distance.
This manual provides essential information for the proper setup, operation, and maintenance of your JJC BR-E1 remote control.
Produktegenskaber
- Trådløs Bluetooth-forbindelse: Operates via 2.4 GHz GFSK transmission for reliable connection.
- Multifunktionskontrol: Supports instant shooting, 2-second delayed shooting, video recording, autofocus (AF), and zoom functions.
- Driftsafstand: Effective range of approximately 10 meters (32.8 feet) in any direction.
- Strømkilde: Powered by one CR2032 battery (included).
- Kompakt og bærbar: Designet til nem transport og opbevaring.

Kompatibilitet
The JJC BR-E1 remote control is compatible with the following Canon camera models:
- Canon EOS R1, R100, R8, R50, R6 Mark II, R10, R7, R5C, R3, R5, R6, R, RP
- Canon EOS M50 Mark II, M6 Mark II, M50, M200
- Canon EOS 6D Mark II, 90D, 77D, 850D, 800D, 200D II, 200D
- Canon PowerShot V10, G5 X Mark II, G7 X Mark III, SX70 HS
Vigtige bemærkninger om kompatibilitet:
- The zoom function of the remote is not available on the PowerShot V10.
- For EOS R5C, the remote can only be used in photo mode. Ensure Bluetooth is enabled on your camera.
- Power zoom lenses can be zoomed directly by pressing the zoom button on the remote control.
- Some lenses may require a Power Zoom Adapter (not included) to utilize the zoom buttons on the remote.
- Under viewfinder shooting, the lens cannot be zoomed via the remote's zoom button.

Opsætning
Installation af batteri
- Find batterirummet på bagsiden af fjernbetjeningen (se figur 1).
- Use a small coin or tool to twist the battery cover counter-clockwise to open.
- Isæt et CR2032-batteri med den positive (+) side opad.
- Sæt batteridækslet på igen, og drej det med uret for at fastgøre det.
Pairing the Remote with Your Camera
Follow these steps to pair the JJC BR-E1 remote control with your compatible Canon camera:
- On your camera, navigate to the menu and enable Bluetooth.
- Select the "Pairing" option within the camera's Bluetooth settings.
- Tryk på og hold samtidigt nede W og T buttons on the remote control for more than 3 seconds. The indicator lamp on the remote will flash.
- On the camera screen, confirm the pairing by pressing "OK" when prompted. The pairing process is complete when the camera indicates a successful connection.
Betjeningsvejledning
Before operating, ensure your camera's drive mode is set to "remote mode" or a self-timer mode that supports remote control (e.g., 10 sec/remote).
For Photos:
- Instant Shot: Set the remote to 'S' mode (Single Shot) using the function switching button, then press the shutter release button.
- 2-Second Delayed Shot: Set the remote to '2S' mode (2-Second Delay) using the function switching button, then press the shutter release button.
- Long Exposure (Bulb Mode): Set your camera to Bulb mode. Press the shutter release button on the remote to start the exposure, and press it again to stop.
- Autofokus: Tryk på AF button to initiate autofocus.
- Zoom: Brug W (Wide-Angle) and T (Telephoto) buttons to zoom in or out with compatible power zoom lenses.
For Videos:
To start or stop video recording, ensure your camera is set to video mode. Then, press the shutter release button on the remote control.


Opretholdelse
- Keep the remote control dry. Do not expose it to moisture or rain.
- Rengør fjernbetjeningen med en blød, tør klud. Undgå at bruge skrappe kemikalier eller slibende materialer.
- Opbevar fjernbetjeningen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- If the remote will not be used for an extended period, remove the CR2032 battery to prevent leakage.

Fejlfinding
- Fjernbetjeningen svarer ikke:
- Kontroller, om batteriet er korrekt installeret og har tilstrækkelig strøm. Udskift det om nødvendigt.
- Ensure the remote is within the operating distance (approx. 10m/32.8').
- Re-pair the remote with your camera following the pairing instructions in the Setup section.
- Verify that the camera's Bluetooth is enabled and the drive mode is set correctly.
- Zoomfunktionen virker ikke:
- Confirm that your lens is a power zoom lens or that you are using a compatible Power Zoom Adapter (if required).
- The zoom function is not available during viewfinder shooting. Use Live View or screen shooting.
- The zoom function is not supported on the PowerShot V10.
- Video recording not starting/stopping:
- Ensure your camera is set to video mode before attempting to record.
Specifikationer
| Modelnavn | BR-E1 |
| Transmissionsmetode | 2.4 GHz, GFSK modulation |
| Driftsafstand | Ca. 10 m / 32.8 fod |
| Strømkilde | CR2032 batteri (medfølger) |
| Dimensioner | Ca. 91.5 x 30.8 x 12.7 mm (3.6 x 1.2 x 0.5 tommer) |
| Vægt | Ca. 14 g |


Garanti og support
Information regarding warranty coverage and customer support for the JJC BR-E1 Wireless Bluetooth Remote Control was not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for specific warranty terms and support contact details.