Airpulse A80
Brugermanual til Airpulse A80 aktive reolhøjttalere
Model: A80 | Mærke: Airpulse
1. Introduktion
Tak for købetasing the Airpulse A80 Powered Bookshelf Speakers. This manual provides essential information for the safe and efficient use of your new audio system. Please read it thoroughly before operation and retain it for future reference.
Pakkens indhold
- Airpulse A80 Active Speaker (Right)
- Airpulse A80 Passive Speaker (Left)
- Fjernbetjening
- Strømkabel
- Left/Right Speaker Connection Cable
- USB kabel
- Optisk kabel
- RCA-kabel
- Urethane Angle Bases (for speaker tilt)

Figur 1: Forside view of the Airpulse A80 powered bookshelf speakers.
2. Sikkerhedsinstruktioner
For at sikre sikker drift og forhindre skader, bedes du overholde følgende sikkerhedsretningslinjer:
- Strømkilde: Connect the speakers only to a power outlet with the correct voltage as indicated on the product.
- Ventilation: Sørg for tilstrækkelig ventilation omkring højttalerne. Bloker ikke ventilationsåbningerne.
- Vand og fugt: Do not expose the speakers to water, rain, or excessive moisture.
- Varmekilder: Keep speakers away from heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
- Rensning: Unplug the speakers before cleaning. Use a dry cloth only.
- Service: Forsøg ikke selv at servicere højttalerne. Overlad al service til kvalificeret servicepersonale.
3. Opsætning
3.1 Højttalerplacering
Place the speakers on a stable, level surface. For optimal stereo imaging, position the speakers equidistant from your listening position, forming an equilateral triangle. The included urethane angle bases can be used to slightly tilt the speakers upwards for better sound dispersion if placed on a lower surface.
3.2 Tilslutning af højttalere
The right speaker is the active unit containing the amplifier and controls. The left speaker is passive. Connect the left speaker to the "L SPEAKER OUT" port on the rear of the right speaker using the provided speaker connection cable.

Figure 2: Rear panel of the Airpulse A80 speakers, illustrating the connection points.
3.3 Strømtilslutning
Connect the power cable to the "AC-INPUT" port on the rear of the active (right) speaker, then plug it into a wall outlet. Ensure the power switch is in the "OFF" position before connecting to power.
3.4 Lydkildetilslutninger
The Airpulse A80 offers multiple input options:
- USB-indgang: Connect your computer to the "USB" port using the provided USB cable for high-quality digital audio playback.
- Optisk indgang: Connect devices like TVs or game consoles to the "OPT" port using an optical cable.
- RCA (AUX) indgang: Use the RCA cable to connect analog audio sources to the "AUX" ports (L/R).
- PC-indgang: Use the RCA cable to connect your PC's analog audio output to the "PC" ports (L/R).
- Bluetooth: For wireless audio streaming from Bluetooth-enabled devices. (See Section 4.2 for pairing instructions)

Figur 3: Detaljeret view of the active speaker's rear panel, showing input options and controls.
3.5 Subwooferudgang
The "SUB OUT" port allows you to connect an external active subwoofer for enhanced bass response. Connect a subwoofer cable from this port to the input of your active subwoofer.
4. Betjeningsvejledning
4.1 Tænd/sluk
Flip the "POWER" switch on the rear panel of the active speaker to "ON" to power on the system. Flip it to "OFF" to power off.
4.2 Indgangsvalg
You can select the input source using the "VOLUME / INPUT" knob on the rear panel or the input selection buttons on the remote control. Rotate the knob or press the buttons to cycle through USB, Optical, Bluetooth, AUX, and PC inputs.
4.3 Bluetooth -parring
- Select the Bluetooth input on the speakers. The indicator light will flash.
- On your Bluetooth-enabled device (e.g., smartphone, tablet), search for "Airpulse A80" in the Bluetooth settings.
- Select "Airpulse A80" to pair. Once connected, the indicator light on the speaker will glow steadily.
- To disconnect or pair with another device, press and hold the Bluetooth button on the remote control or the "VOLUME / INPUT" knob for a few seconds until the indicator light flashes again.
4.4 Volume, Bass, and Treble Controls
Adjust the overall volume using the "VOLUME / INPUT" knob on the rear panel or the volume buttons on the remote control. The "BASS" and "TREBLE" knobs on the rear panel allow you to fine-tune the low and high frequencies, respectively, from -6dB to +6dB.
4.5 Fjernbetjeningsfunktioner
Den medfølgende fjernbetjening giver nem adgang til forskellige funktioner:
- Tænd/sluk
- Lydstyrke op/ned
- Stum
- Input Selection (USB, Optical, Bluetooth, AUX, PC)
- Bluetooth Disconnect/Pairing
- Playback Controls (Play/Pause, Next/Previous Track - for Bluetooth/USB)
5. Vedligeholdelse
5.1 Rengøring
To clean the speakers, first unplug them from the power outlet. Use a soft, dry cloth to wipe the surfaces. Do not use liquid cleaners, aerosols, or abrasive materials, as these may damage the finish or internal components.
5.2 Opbevaring
If storing the speakers for an extended period, ensure they are powered off and unplugged. Store them in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power cable not connected; Power switch off; Wall outlet not active. | Ensure power cable is securely connected. Turn power switch to "ON". Check wall outlet with another device. |
| Ingen lyd | Incorrect input selected; Volume too low; Mute activated; Cables loose. | Select correct input. Increase volume. Deactivate mute. Check all audio cables for secure connection. |
| Bluetooth ikke parring | Højttalere er ikke i parringstilstand; Enhed for langt væk; Interferens. | Ensure speakers are in Bluetooth input and indicator is flashing. Move device closer. Avoid other wireless devices. |
| Lydforvrængning | Volume too high; Source audio quality poor; Bass/Treble settings too extreme. | Reduce volume. Check source audio. Adjust Bass/Treble knobs to neutral or lower settings. |
| Kun én højttaler har lyd | Left speaker cable loose or disconnected; Source audio issue. | Check the connection of the left speaker cable to the active speaker. Test with a different audio source. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Model | AP-A80 |
| Højttaler type | Powered Bookshelf Speaker System with Subwoofer Output |
| Amplivligere magt | Woofer: 40W x 2 | Tweeter: 10W x 2 (Total 100W RMS) |
| Indgange | USB, Optical, Bluetooth 5.0, RCA (AUX), PC |
| Udgange | Subwoofer udgang |
| Forbindelsesteknologi | Bluetooth, USB |
| Woofer størrelse | 4.5 tommer (11.5 cm) |
| Produktmål (B x D x H) | 14 cm x 24 cm x 25.5 cm (per speaker, including protrusions) |
| Produktets vægt | 4.8 kg (pr. højttaler) |
| Kontrolmetode | Remote Control, On-board Knobs |
| Lydudgangstilstand | Stereoanlæg |
| Monteringstype | Bordplademontering |

Figur 4: Eksploderet view of a speaker driver, illustrating its internal components.
8. Garanti og support
Airpulse products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Airpulse webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
For further assistance, please contact your local dealer or Airpulse customer service.