Mastervolt Mass Combi Pro 24/3500-100 User Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Mastervolt Mass Combi Pro 24/3500-100 Power Inverter / Charger. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual in a safe place for future reference.

2. Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller skade på udstyret:

• Kvalificeret personale: Installation og vedligeholdelse bør kun udføres af kvalificeret personale, der er bekendt med elektriske systemer og sikkerhedsprocedurer.
• Fare for elektrisk stød: Denne enhed fungerer med høj lydstyrketagÅbn ikke c'enasing or attempt repairs unless specifically instructed by Mastervolt. Disconnect all power sources (AC and DC) before servicing.
• Ventilation: Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning. Bloker ikke ventilationsåbningerne.
• Miljø: Do not expose the unit to water, excessive moisture, or flammable liquids. Install in a dry, protected environment.
• Batterisikkerhed: When working with batteries, wear appropriate personal protective equipment. Batteries can produce explosive gases.
• Korrekt ledningsføring: Use correct wire gauges and ensure all connections are tight and secure to prevent fire hazards or poor performance.

3. Produktet er slutview

The Mastervolt Mass Combi Pro 24/3500-100 is a powerful and versatile inverter/charger combination designed for demanding applications. It integrates an advanced inverter, a robust battery charger, and a sophisticated transfer system into a single unit.

Nøglefunktioner omfatter:

• Høj effekt: Provides 3500 W of continuous inverter power.
• Advanced Charging: Features a built-in solar charge controller for optimal yield and efficient battery charging.
• Parallel and 3-Phase Operation: Capable of integration into parallel or 3-phase configurations for larger load requirements up to 35 kW (requires external switching system for larger systems).
• Effektiv teknologi: Utilizes new inverter technology for low standby consumption and a fast digital signal processor for seamless switching between power sources.
• Power Assist: Prevents power breaks and outages, even with weak power connections or small generators.
• Stille drift: Active Optima Cooling allows up to 50% of charging current or inverter capacity without fan cooling, ensuring quiet operation at lower loads.
• MasterBus Integration: Equipped with MasterBus for advanced system monitoring and control.
• Dobbelte AC-indgange: Features two separate AC inputs for generator and shore power, adapted to specific power source characteristics.

Front view of the Mastervolt Mass Combi Pro 24/3500-100, showing the grey casing with vertical fins for cooling, the 'PRO' logo, 'MASS COMBI PRO 24/3500 - 100 INVERTER / CHARGER COMBINATION' text, and a teal control panel on the right. The control panel features indicator lights for 'Gen', 'Mains', 'Out 1', 'Out 2', and battery charging states ('Float', 'Abs', 'Bulk'), along with an 'On/Off/Inverter Off' switch.

4. Opsætning og installation

Proper installation is crucial for the safe and reliable operation of the Mass Combi Pro. It is strongly recommended that installation be performed by a certified marine or electrical technician.

• Montering: Mount the unit in a dry, well-ventilated area, away from heat sources and flammable materials. Ensure sufficient clearance for airflow around the unit.
• DC ledninger: Connect the DC input to your battery bank using appropriately sized cables and fuses. Observe correct polarity.
• AC input ledninger: Connect the AC inputs (shore power and/or generator) to the designated terminals. Ensure proper grounding and circuit protection.
• AC-udgangsledninger: Tilslut dine AC-belastninger til AC-udgangsterminalerne.
• Remote Control/Monitoring: If applicable, connect any remote control panels or MasterBus communication cables.
• Indledende opstart: After all connections are secure, carefully apply DC power, then AC input power. Observe the indicator lights for normal operation.

5. Betjeningsvejledning

The Mass Combi Pro features a user-friendly control panel for basic operation and status monitoring.

5.1 Kontrolpanel overview

Refer to the product image in Section 3 for visual reference of the control panel.

• On/Off/Inverter Off Switch: This switch controls the main power and inverter function.
  • På: Activates both the inverter and charger functions.
  • Slukket: Turns off the entire unit.
  • Inverter Off: Disables the inverter function while allowing the charger to remain active (if AC input is present).
• Indikatorlys: These LEDs provide status information:
  • Gen: Indicates generator AC input is active.
  • Hovedbrandledninger: Indicates shore power AC input is active.
  • Out 1 / Out 2: Indiker AC-udgangsstatus.
  • Float / Abs / Bulk: Indicate the current stage of the battery charging process.

5.2 Grundlæggende betjening

1. Start af enheden: Set the On/Off/Inverter Off switch to 'On'. The unit will perform a self-test, and the inverter will begin supplying AC power from the batteries if no external AC input is present.
2. Opladning af batterier: When an external AC source (shore power or generator) is connected and active, the unit will automatically begin charging the batteries according to the detected charge stage (Bulk, Absorption, Float).
3. Switching AC Sources: The unit automatically switches between available AC input sources (generator, mains) and inverter power to ensure continuous AC supply to your loads.
4. Lukker ned: To turn off the unit, set the On/Off/Inverter Off switch to 'Off'.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your Mass Combi Pro.

• Rensning: Periodically clean the exterior of the unit with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
• Forbindelser: Kontrollér årligt alle elektriske forbindelser (DC og AC) for tæthed og korrosion. Løse forbindelser kan forårsage overophedning og dårlig ydeevne.
• Batteriinspektion: Regularly check your battery bank according to the battery manufacturer's recommendations.
• Firmwareopdateringer: Check the Mastervolt website for any available firmware updates for your unit. Updates may improve performance or add new features.

7. Fejlfinding

If you encounter issues with your Mass Combi Pro, refer to the following basic troubleshooting steps. For complex problems, contact Mastervolt support.

8. Specifikationer

The following table details the technical specifications for the Mastervolt Mass Combi Pro 24/3500-100.

9. Garanti og support

For warranty information, technical support, or service, please contact Mastervolt directly or refer to their official webwebsted. Hav din købskvittering og produktets serienummer ved hånden, når du kontakter support.

Mastervolt Officiel Webwebsted: www.mastervolt.com