COMISO X26L Waterproof Bluetooth Speaker Instruction Manual

1. Produktet er slutview

The COMISO X26L is a portable, waterproof Bluetooth speaker designed for high-quality audio playback in various environments. It features a robust design, long battery life, and advanced connectivity options.

Figure 1: COMISO X26L speaker demonstrating its waterproof design.

Nøglefunktioner:

• Krystalklar lyd: Equipped with two precision acoustic drivers for distinct mids and highs, and a proprietary passive bass radiator for enhanced bass.
• IPX7 vandtæt bedømmelse: Can be fully submerged up to 1 meter for 30 minutes, suitable for outdoor and indoor activities including showers, pool parties, hiking, and camping.
• True Wireless Stereo (TWS) funktion: Pair two COMISO X26L speakers for a true wireless stereo experience with double enhanced sound.
• Forlænget spilletid: Built-in 6000mAh rechargeable battery provides up to 36 hours of continuous playtime.
• Bluetooth 5.0-forbindelse: Ensures quick, low-latency, and stable connections within a 10-meter (33-foot) range.
• Indbygget mikrofon: Giver mulighed for håndfri opkald.

2. Opsætning

2.1 Hvad er der i æsken

• COMISO X26L Bluetooth Speaker
• USB-C ladekabel
• 3.5 mm lydkabel
• Brugermanual

2.2 Opladning af højttaleren

Before first use, fully charge the speaker. The charging port is located at the base of the unit, protected by a rubber flap.

1. Open the rubber flap at the base of the speaker.
2. Tilslut det medfølgende USB-C-opladerkabel til højttalerens opladningsport.
3. Tilslut den anden ende af USB-C-kablet til en kompatibel USB-strømadapter (medfølger ikke).
4. A blue LED indicator ring around the top control panel will illuminate during charging.
5. Charging typically takes approximately 3 hours. The LED indicator will change or turn off once fully charged.

2.3 Tænd/sluk

The power button is located in the center of the top control panel.

• For at tænde: Press and hold the power button for a few seconds until you hear an audio prompt and the blue LED indicator ring illuminates.
• For at slukke: Press and hold the power button for a few seconds until you hear an audio prompt and the blue LED indicator ring turns off.

2.4 Bluetooth -parring

The speaker uses Bluetooth 5.0 for stable wireless connections.

1. Ensure the speaker is powered on and the blue LED indicator ring is flashing, indicating it's in pairing mode.
2. Aktiver Bluetooth på din enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
3. Select 'COMISO X26L' from the list of devices.
4. Once connected, you will hear an audio confirmation, and the blue LED indicator will stop flashing and remain solid.
5. Højttaleren genopretter automatisk forbindelsen til den sidst parrede enhed, når den tændes, hvis den er inden for rækkevidde.

Figure 2: Bluetooth connectivity and True Wireless Stereo setup.

2.5 Ægte trådløs stereo (TWS) parring

To achieve a stereo sound experience, you can pair two COMISO X26L speakers together.

1. Ensure both COMISO X26L speakers are powered on and not connected to any other Bluetooth device.
2. On one speaker (this will be your master speaker), press the middle power button twice quickly. You will hear a prompt indicating TWS pairing mode.
3. The two speakers will automatically search for and connect to each other. Once connected, you will hear an audio confirmation.
4. Now, connect your device to the master speaker via Bluetooth as described in section 2.4. The audio will play in sync on both speakers, providing a stereo sound.
5. To disconnect TWS, simply power off either speaker.

3. Betjening af højttaleren

3.1 Kontrolpanelfunktioner

The top control panel features intuitive buttons for managing playback and volume.

• Tænd/sluk-knap (midt): Press and hold to power on/off. Press once to play/pause music. Double-press for TWS pairing.
• Lydstyrke op (+) / Næste nummer: Press once to increase volume. Press and hold to skip to the next track.
• Lydstyrke ned (-) / Forrige nummer: Tryk én gang for at sænke lydstyrken. Tryk og hold nede for at gå til forrige nummer.
• Play/Pause Button (Triangle): Tryk én gang for at afspille eller sætte musik på pause.

3.2 Kablet tilslutning

For devices without Bluetooth or to conserve battery, use the 3.5mm audio jack.

1. Open the rubber flap at the base of the speaker.
2. Connect the provided 3.5mm audio cable to the AUX port on the speaker.
3. Connect the other end of the audio cable to your audio source.
4. Højttaleren skifter automatisk til AUX-tilstand.

3.3 Vandtæthed (IPX7)

The COMISO X26L is IPX7 rated, meaning it can be submerged in water up to 1 meter (3 feet) for 30 minutes. This makes it ideal for use in wet environments.

• Sørg for, at gummiklappen, der dækker opladnings- og AUX-portene, er forsvarligt lukket, før højttaleren udsættes for vand.
• Undgå længerevarende nedsænkning ud over den angivne dybde og tid.
• Do not expose the speaker to saltwater or other chemicals, as this may damage the device.

Figure 3: The COMISO X26L is IPX7 waterproof.

4. Vedligeholdelse

4.1 Rengøring

• Tør højttaleren af ​​med en blød, damp klæde.
• Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Ensure all ports are dry before charging or connecting cables after exposure to water.

4.2 Opbevaring

• Opbevar højttaleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Hvis batteriet opbevares i længere tid, skal det oplades til cirka 50% for at forlænge dets levetid.

5. Fejlfinding

5.1 Højttaleren tænder ikke

• Sørg for, at batteriet er opladet. Tilslut højttaleren til en strømkilde med USB-C-kablet.
• Tryk og hold tænd/sluk-knappen nede i et par sekunder.

5.2 Kan ikke parres via Bluetooth

• Sørg for, at højttaleren er i parringstilstand (blinkende blå LED).
• Make sure the speaker is within the 10-meter (33-foot) Bluetooth range of your device.
• Slå Bluetooth fra og til på din enhed, og prøv derefter at søge igen.
• If previously paired, try 'forgetting' the device on your phone's Bluetooth settings and re-pairing.
• Sørg for, at der ikke er andre enheder tilsluttet højttaleren i øjeblikket.

5.3 Ingen lyd eller lav lydstyrke

• Skru op for lydstyrken på både højttaleren og din tilsluttede enhed.
• Ensure the speaker is properly paired via Bluetooth or connected via the 3.5mm audio cable.
• Kontroller, om lydkilden afspilles korrekt.

5.4 TWS-parring mislykkes

• Ensure both speakers are COMISO X26L models.
• Make sure neither speaker is connected to any other Bluetooth device before attempting TWS pairing.
• Power off both speakers, then power them on and try the TWS pairing process again.

6. Specifikationer

7. Garanti og support

7.1 Garantioplysninger

Dette produkt leveres med en Begrænset garanti. Please refer to the warranty card included in your product packaging for specific terms and conditions. Keep your purchase receipt as proof of purchase.

7.2 Kundesupport

For any questions, technical assistance, or warranty claims, please contact COMISO customer support through the retailer where you purchased the product or visit the official COMISO webwebsted for kontaktoplysninger.