1. Introduktion
This manual provides essential information for the safe installation, operation, and maintenance of your Rabalux Greg LED Picture Light. Please read these instructions carefully before installation and retain them for future reference.
Billede 1.1: Forside view of the Rabalux Greg LED Picture Light.
2. Sikkerhedsinstruktioner
- Afbryd altid strømmen før installation, vedligeholdelse eller rengøring.
- Installationen bør udføres af en kvalificeret elektriker, hvis du er i tvivl.
- Produktet må ikke ændres på nogen måde. Uautoriserede ændringer kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
- Sørg for, at monteringsfladen er egnet til at bære armaturets vægt.
- Dette produkt er kun beregnet til indendørs brug (IP20-klassificering). Må ikke udsættes for fugt eller ekstreme temperaturer.
- Se ikke direkte ind i LED-lyskilden, når den er tændt.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Rabalux Greg LED Picture Light fixture (with integrated LED bulb)
- Integreret kontakt
- Monteringsudstyr (skruer, vægdyvler) - (Assumed, as typical for such fixtures)
- Instruktionsmanual
4. Produktet er slutview
The Rabalux Greg LED Picture Light is a sleek, white fixture designed to illuminate artwork or other wall-mounted items. It features an integrated LED light source providing neutral white light (4000K) and an on/off switch for convenient control.
Image 4.1: The LED picture light in its off state.
Image 4.2: The LED picture light illuminated.
Billede 4.3: Vinklet view of the illuminated LED picture light.
5. Dimensioner
The physical dimensions of the Rabalux Greg LED Picture Light are as follows:
- Bredde: 570 mm
- Højde: 20 mm
- Dybde: 30 mm
Image 5.1: Dimensional diagram of the LED picture light.
6. Installation
Follow these steps for proper installation of your LED picture light:
- Forbered monteringsoverfladen: Choose a suitable location on the wall, ensuring it is clean and dry.
- Markér borepunkter: Hold the fixture in the desired position and mark the drilling points for the mounting screws.
- Bore huller: Drill holes at the marked points. Insert wall plugs if necessary for your wall type.
- Monter armaturet: Secure the fixture to the wall using the provided screws. Ensure it is firmly attached.
- Tilslut til strøm: Connect the electric cable to a suitable power outlet. Ensure the cable is not pinched or damaged.
- Test drift: Once installed, switch on the power and test the light using the integrated switch.
Image 6.1: Installation diagram for connecting multiple units (Series 5216-5219).
Note: The diagram illustrates the possibility of connecting multiple units (models 5216, 5217, 5218, 5219) in series, up to a maximum of 10 units. Ensure total wattage does not exceed circuit limits.
7. Betjeningsvejledning
The Rabalux Greg LED Picture Light is operated using the integrated on/off switch located on the fixture. Simply toggle the switch to turn the light on or off.
- At tænde: Tryk kontakten til 'ON'-positionen.
- At slukke: Tryk kontakten til 'OFF'-positionen.
Dette armatur er ikke dæmpbar. It operates at a fixed brightness level.
8. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your LED picture light.
- Rensning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or liquids that could damage the finish or electrical components.
- LED udskiftning: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need to be replaced.
- Inspektion: Periodically check the power cable and fixture for any signs of damage. If damage is found, discontinue use and consult a qualified technician.
9. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Ingen strømforsyning Kontakten er slukket Defekt ledningsføring | Kontroller stikkontakt og afbryder Sørg for, at kontakten er i 'ON'-positionen Kontakt en kvalificeret elektriker |
| Lyse flimrer | Ustabil strømforbindelse Intern komponent problem | Kontroller strømkabelforbindelsen Afbryd brugen og kontakt support |
| Lyset er for svagt/lyst | This model is not dimmable. Brightness is fixed. | No action required. This is normal operation. |
10. Specifikationer
| Mærke | Rabalux |
| Modelnavn | Greg |
| Serie | 5216-5219 |
| ASIN | B089P2SQ64 |
| Fabrikant | Rabalux |
| Farve | Hvid |
| Materiale | Plast |
| Inkluderede komponenter | LED Bulb (integrated), Switch |
| Skygge farve | Neutral White |
| Stiktype | El-kabel |
| Installationstype | Picture Board / Wall Mount |
| Batterier påkrævet | Ingen |
| Pære type | LED (integreret) |
| Energimærke | F |
| Lysstrøm | 800 lm |
| Magt | 9 watt |
| Lys farvetemperatur | 4000 K (Neutral White) |
| Dæmpbar | Ingen |
| Beskyttelsesvurdering | IP20 (kun indendørs brug) |
| Mål (L x H x D) | 570 mm x 20 mm x 30 mm |
| Værelsestype | Living Room (Recommended) |
11. Garanti og support
Information regarding specific warranty terms and spare parts availability for this product is not provided in the available data. For warranty claims or technical support, please refer to the retailer where the product was purchased or contact Rabalux customer service directly through their official webwebsted.
- Tilgængelighed af reservedele: Oplysningerne er ikke tilgængelige.
- Softwareopdateringer: Ikke relevant for dette produkt.