Moukey Ultra-Low Noise 8-Channel Line Stereo Audio Mixer

1. Introduktion

Tak for købetasing the Moukey MAMX3 Ultra-Low Noise 8-Channel Line Stereo Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Figure 1: Moukey MAMX3 8-Channel Line Stereo Audio Mixer

2. Sikkerhedsinstruktioner

• Udsæt ikke denne enhed for regn eller fugt for at undgå brand eller elektrisk stød.
• Åbn ikke c'enasing. Der er ingen dele indeni, som kan serviceres af brugeren. Overlad al service til kvalificeret personale.
• Sørg for, at strømforsyningen voltage opfylder de krav, der er angivet på enheden.
• Undgå at placere enheden i nærheden af ​​varmekilder eller i direkte sollys.
• Clean only with a dry cloth. Do not use liquid cleaners.
• Opbevares utilgængeligt for børn.

3. Produktfunktioner

• 8-kanals input: Mix up to eight independent audio signals.
• Stereo/Mono Switching: Flexible input/output configuration for both stereo and mono signals. For stereo, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables. For mono, eight mono signal inputs are mixed into one mono signal output.
• Uafhængig lydstyrkekontrol: Each input channel features a dedicated volume knob for precise level adjustment.
• Ultralav støjsvag drift: Designed for minimal distortion and excellent audio performance.
• Kompakt og bærbar: Space-saving design for easy transport and setup.
• DC 5V strømforsyning: Powered via DC 5V, offering versatile power options (e.g., USB port, power bank, 5V phone plug).
• Holdbar konstruktion: Robust metal casing ensures longevity.

4. Produktet er slutview

The Moukey MAMX3 mixer features a straightforward layout for easy operation. Below are diagrams illustrating the controls and input/output ports.

Figur 2: Betjeningselementer på øverste panel

• Input 1-8 Level Knobs: Adjust the volume for each individual input channel.
• Mono/Stereo Switches: Select between mono or stereo operation for input channels.
• Channel Output Mix L-R Switch: Combines channels 1-4 and 5-8 into a single stereo output.
• Output A/B Level Knobs: Adjust the overall output volume for Output A and Output B.

Figure 3: Rear Panel Input/Output Ports

• INPUT 1-8 (1/4" TRS/TS): Connect your audio sources here.
• OUTPUT A (1/4" TRS): Primær lydudgang.
• OUTPUT B A/B L-R (1/4" TRS): Secondary audio output, can be configured for A/B or Left/Right stereo.
• DC 5V (USB-C): Strømindgangsport.
• Pow Indicator: Lyser, når enheden er tændt.

Figur 4: Produktmål

5. Opsætning

5.1 Strømtilslutning

1. Locate the DC 5V USB-C port on the rear panel of the mixer.
2. Connect the provided USB cable to the mixer and to a compatible 5V power source (e.g., computer USB port, power bank, or 5V phone charger).
3. The 'Pow' indicator light will illuminate, indicating the mixer is receiving power.

Figur 5: Strømforsyningsmuligheder

5.2 Lydindgangsforbindelser

1. Connect your audio sources (e.g., microphones, guitars, bass, keyboards, media players) to the INPUT 1-8 jacks using 1/4-inch TRS or TS cables.
2. For stereo input, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables and ensure the corresponding Mono/Stereo switch is set to 'Stereo'.
3. For mono input, use 1/4-inch TS cables and ensure the corresponding Mono/Stereo switch is set to 'Mono'.

5.3 Lydudgangsforbindelser

1. Tilslut OUTPUT A- og/eller OUTPUT B-stikkene til din amplifier, powered speakers, or recording device using 1/4-inch TRS cables.
2. Sørg for, at alle forbindelser er sikre, før du fortsætter med driften.

6. Betjeningsvejledning

6.1 Tænd/sluk

The mixer powers on automatically when connected to a 5V power source. Disconnect the power cable to turn off the unit.

6.2 Adjusting Channel Levels

1. Turn all LEVEL knobs (1-8) and OUTPUT A/B knobs to their minimum position before playing any audio.
2. Start afspilning af lyd fra din tilsluttede kilde.
3. Slowly increase the LEVEL knob for the corresponding input channel until the desired volume is achieved.
4. Adjust the OUTPUT A/B knobs to control the overall master volume.

6.3 Valg af stereo/mono-tilstand

Use the Mono/Stereo switches above each channel to select the desired mode. For stereo operation, ensure you are using TRS cables for both input and output and the switch is set to 'Stereo'. For mono operation, set the switch to 'Mono'.

6.4 Mixing Multiple Sources

The MAMX3 allows you to mix up to eight line-level signals. Adjust each channel's LEVEL knob independently to create your desired mix. The Channel Output Mix L-R switch can combine channels 1-4 and 5-8 into a single stereo output for simplified routing.

Figure 6: Mixer in a typical setup

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the exterior of the mixer. Do not use abrasive cleaners, solvents, or waxes.
• Opbevaring: Når mixeren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
• Kabelpleje: Always handle cables by the connector, not the wire. Avoid bending or crimping cables excessively.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

This Moukey MAMX3 mixer comes with a 12 måneders garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og udførelse under normal brug.

Garantien dækker ikke skader forårsaget af:

• Forkert installation eller betjening.
• Uautoriserede ændringer eller reparationer.
• Accidents, misuse, or neglect.
• Natural disasters or power surges.

For technical support, warranty claims, or any questions regarding your Moukey MAMX3 mixer, please contact our customer service team through the retailer where you purchased the product or visit the official Moukey webwebsted for kontaktoplysninger.

Note: Ingen officiel produktvideo URL (m3u8 format) was provided in the product data. Therefore, no video is embedded in this manual.