Black Box EMD2000SE-R Emerald SE DVI KVM-Over-IP Receiver User Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Black Box EMD2000SE-R Emerald SE DVI KVM-Over-IP Matrix Switch Receiver. The EMD2000SE-R is designed to extend DVI video, VUSB 2.0, serial, and audio signals over an IP network, enabling remote access to a computer from a user console. Please read this manual thoroughly before using the device to ensure proper setup and functionality.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre skader på enheden og sikre brugerens sikkerhed:

• Sørg for, at enheden er placeret på en stabil, plan overflade.
• Udsæt ikke enheden for fugt, ekstreme temperaturer eller direkte sollys.
• Brug kun den strømadapter, der følger med enheden.
• Åbn ikke enheden casing; overlad al service til kvalificeret personale.
• Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning.

3. Pakkens indhold

Bekræft, at din pakke indeholder følgende varer:

• 1 x Black Box EMD2000SE-R Emerald SE DVI KVM-Over-IP Matrix Switch Receiver
• 1 x Power Adapter (specific to region)
• 1 x Lynstartguide (ikke inkluderet i denne digitale manual)

If any items are missing or damaged, please contact Black Box technical support immediately.

4. Produktet er slutview

The Black Box EMD2000SE-R is a high-performance KVM-over-IP receiver designed for seamless desktop experience. It supports single-head Full HD DVI video, VUSB 2.0, serial, and audio signals, allowing for flexible and efficient remote access solutions.

4.1 Frontpanel

The front panel provides convenient access to essential user interfaces:

• Power knap: Used to power the unit on or off.
• USB 2.0-porte (x2): For connecting USB peripherals such as keyboards, mice, or other USB devices.
• Mikrofonindgang: 3.5 mm jackstik til tilslutning af mikrofon.
• Hovedtelefonudgang: 3.5mm jack for connecting headphones or speakers.

4.2 Rear Panel (Conceptual Description)

While not shown in the provided image, the rear panel typically houses the primary connectivity ports for the KVM receiver. These would include:

• DVI-D Output Port: For connecting to a DVI monitor.
• Ethernet-port (RJ-45): For network connection to the KVM-over-IP matrix switch or transmitter.
• USB Type-B-port: For connecting to the host computer (if applicable for local console or configuration).
• Serial Port (DB9): For connecting serial devices or for management.
• Strømindgangsstik: Til tilslutning af den eksterne strømadapter.

5. Opsætning og installation

Follow these steps to set up your Black Box EMD2000SE-R receiver:

1. Sluk alle enheder: Before making any connections, ensure that your computer, monitor, and the KVM receiver are powered off.
2. Tilslut skærm: Connect a DVI cable from the DVI-D output port on the rear of the EMD2000SE-R receiver to the DVI input on your monitor.
3. Tilslut USB-tilbehør: Connect your USB keyboard and mouse to the USB 2.0 ports on the front panel of the EMD2000SE-R.
4. Tilslut lydenheder: If using, connect your microphone to the microphone input and headphones/speakers to the headphone output on the front panel.
5. Netværks forbindelse: Connect an Ethernet cable from your network switch or router to the Ethernet port on the rear of the EMD2000SE-R. Ensure this network is configured to communicate with the corresponding KVM transmitter unit.
6. Connect Serial Device (Optional): If using a serial device, connect it to the serial port on the rear of the EMD2000SE-R.
7. Anvend strøm: Connect the supplied power adapter to the power input jack on the rear of the EMD2000SE-R, then plug the adapter into a power outlet.
8. Tænd: Press the power button on the front panel of the EMD2000SE-R. Power on your monitor and the remote computer.

The receiver should now establish a connection with the KVM-over-IP matrix switch or transmitter, providing access to the remote computer.

6. Betjeningsvejledning

Once the EMD2000SE-R is set up and powered on, it will automatically attempt to connect to the KVM-over-IP network. The exact method of selecting and switching between connected computers will depend on the KVM-over-IP matrix switch or system it is connected to.

• Accessing Remote Computers: Refer to the documentation for your Black Box KVM-over-IP matrix switch or management software for instructions on how to select and switch between connected computers.
• USB Device Functionality: Connected USB keyboards, mice, and other VUSB 2.0 devices will function as if directly connected to the remote computer.
• Lydtransmission: Audio signals from the remote computer will be output through the headphone jack, and microphone input will be transmitted to the remote computer.
• Seriel kommunikation: The serial port provides transparent pass-through for serial data communication with the remote computer.

7. Vedligeholdelse

The Black Box EMD2000SE-R is designed for reliable operation with minimal maintenance. Follow these guidelines:

• Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosol.
• Ventilation: Sørg for, at ventilationsåbningerne ikke er blokeret for at forhindre overophedning.
• Firmwareopdateringer: Periodically check the Black Box website for firmware updates for your EMD2000SE-R model. Follow the provided instructions carefully for any update procedures.

8. Fejlfinding

If you encounter issues with your EMD2000SE-R, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Black Box technical support.

9. Specifikationer

10. Garantioplysninger

Black Box products are designed for high reliability. For detailed warranty information regarding your EMD2000SE-R, please refer to the warranty statement included with your product packaging or visit the official Black Box webwebsted. Gem din købsbevis til garantikrav.

11. Teknisk support

If you require further assistance or encounter issues not covered in this manual, please contact Black Box Technical Support. Contact information can typically be found on the Black Box webwebstedet eller i dokumentationen, der følger med dit produkt.

When contacting support, please have your product model number (EMD2000SE-R) and serial number ready.