BRAINWAVZ UltraT Under Desk Headphone Hanger Instruction Manual

1. Introduktion

Thank you for choosing the BRAINWAVZ UltraT Under Desk Headphone Hanger. This product is designed to provide a convenient and space-saving solution for storing your headphones and managing cables. It features a robust design and uses strong adhesive for secure mounting without the need for screws. Please read this manual carefully before installation and use to ensure proper function and longevity of your hanger.

2. Sikkerhedsoplysninger

• Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
• Do not exceed the maximum recommended weight capacity of 2 kg (4.4 lbs) for the hanger.
• Avoid mounting on delicate or painted surfaces where adhesive removal might cause damage.
• Opbevares utilgængeligt for små børn for at forhindre utilsigtet indtagelse af små dele eller misbrug.
• Dette produkt er kun beregnet til indendørs brug.

3. Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

• 1 x BRAINWAVZ UltraT Under Desk Headphone Hanger
• Pre-applied 3M VHB adhesive tape

4. Opsætning og installation

The BRAINWAVZ UltraT uses strong 3M VHB adhesive tape for installation. Follow these steps carefully for a secure mount.

1. Vælg en placering: Select a flat, smooth, and clean surface under your desk or shelf. Ensure there is enough clearance for your headphones to hang freely.
2. Rengør overfladen: Thoroughly clean the chosen mounting area with an alcohol wipe or a clean cloth and rubbing alcohol. Allow the surface to dry completely. This step is critical for optimal adhesion.
3. Prepare the Hanger: The 3M VHB tape is pre-applied to the top surface of the hanger. Carefully peel off the red protective backing from the adhesive pads.
4. Position og tryk: Align the hanger in the desired position. Once aligned, firmly press the hanger against the cleaned surface for at least 30 seconds. Apply consistent pressure across the entire adhesive area.
5. Tillad hærdningstid: For maximum bond strength, allow the adhesive to cure for 24 hours before hanging any headphones. This allows the adhesive to fully set.

5. Betjening

The UltraT hanger is designed for simple and efficient use.

5.1 Hanging Headphones

• The hanger features two wide cradles, allowing you to hang up to two large headphones simultaneously.
• Place the headband of your headphones onto the curved support arms of the hanger. Ensure the headphones are balanced to prevent them from falling.

5.2 Kabelstyring

• Integrated cable hooks are located on the underside of the hanger.
• Wrap excess headphone cables around these hooks to keep your desk tidy and prevent tangles.

6. Vedligeholdelse

• Rensning: Tør bøjlen af ​​med en blød kludamp cloth to remove dust or smudges. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic material.
• Kontrol af klæbemiddel: Periodically check the adhesion to ensure it remains secure. If the hanger shows signs of loosening, remove all weight and re-apply pressure to the adhesive area.

7. Fejlfinding

7.1 Hanger is not sticking securely.

• Sørg for, at monteringsfladen er grundigt rengjort og tør inden påføring.
• Verify that sufficient pressure was applied during installation.
• Confirm that the adhesive was allowed to cure for the recommended 24 hours before use.
• The surface might be unsuitable for adhesive mounting (e.g., porous, textured, or freshly painted).

7.2 Hanger broke or cracked.

• Check if the total weight of the headphones exceeds the maximum capacity of 2 kg (4.4 lbs).
• Inspect for signs of impact or excessive force applied to the hanger.

8. Specifikationer

9. Garanti og support

BRAINWAVZ products are manufactured to high-quality standards. For information regarding warranty coverage, product support, or to contact customer service, please visit the official BRAINWAVZ website or refer to the packaging for contact details. Please retain your proof of purchase for warranty claims.