Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light

1. Introduktion

Thank you for choosing the Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light. This innovative product combines efficient ventilation with a high-fidelity Bluetooth speaker and integrated LED lighting, designed to enhance comfort and air quality in your bathroom. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your unit.

2. Sikkerhedsoplysninger

Læs og forstå alle instruktioner, før du påbegynder installation eller drift. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand, materielle skader eller personskade.

• Afbryd altid strømmen på servicepanelet, før du tilslutter eller servicerer enheden.
• All wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
• Denne enhed er kun beregnet til generel ventilation. Må ikke anvendes til udsugning af farlige eller eksplosive materialer og dampe.
• To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
• This product is UL listed for use over a bathtub or shower when connected to a GFCI-protected branch circuit (ceiling mount only).

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Ventilationsventilatorhus
• Grille Assembly with Integrated LED Light and Bluetooth Speaker
• Installationshardware
• Brugermanual

4. Specifikationer

5. Installation

This fan is designed for easy installation, fitting 2"x8" ceiling construction. A tapered, polymeric 4-inch round duct fitting ensures a positive duct connection without metallic clatter.

Generelle installationstrin:

1. Forbered området: Ensure power is disconnected at the circuit breaker. Clear the installation area in the ceiling.
2. Monter huset: Secure the fan housing to the ceiling joists. The housing dimensions are approximately 8.25" x 8" x 5.75".
3. Tilslut kanalarbejde: Attach the 4-inch round duct to the fan's duct connector. Ensure a secure and airtight connection.
4. Wire the Unit: Connect the electrical wiring according to local electrical codes. The unit requires 120V power.
5. Install Grille Assembly: Once the housing is secured and wired, attach the grille assembly, ensuring it snaps firmly into place.

6. Betjeningsvejledning

Fan and Light Operation:

The fan and LED light are typically controlled via a standard wall switch. Consult your electrician for specific wiring configurations if you desire separate control for the fan and light functions.

Betjening af Bluetooth-højttaler:

The integrated Sensonic Bluetooth speaker allows you to stream audio wirelessly from any Bluetooth-enabled device.

Parring af din enhed:

1. Ensure the fan unit has power. The Bluetooth speaker will automatically enter pairing mode when powered on.
2. Naviger til Bluetooth-indstillingerne på din smartphone eller anden Bluetooth-aktiveret enhed.
3. Look for a device named "FAN SPEAKER" (or similar, refer to your device's specific instructions if different).
4. Select "FAN SPEAKER" to pair. Once paired, you will hear an audible confirmation tone from the speaker.
5. You can now stream audio from your device to the fan's speaker.

The speaker does not require a specific application for functionality.

7. Vedligeholdelse

Regular cleaning and maintenance will ensure the long-term performance and efficiency of your ventilation fan.

Rengøring af gitteret:

1. Disconnect power to the fan at the service panel.
2. Gently pull down the grille assembly from the ceiling. It is typically held by spring clips.
3. Wipe the grille with a damp cloth using a mild, non-abrasive cleaning solution. Do not spray water directly onto the grille or electrical components.
4. Allow the grille to dry completely before reattaching.

Cleaning the Fan Motor and Housing:

Periodically, the fan motor and housing may accumulate dust and debris. This should be cleaned by a qualified service person.

• Disconnect power to the fan at the service panel.
• Remove the grille assembly.
• Carefully vacuum or wipe away any dust from the fan blades and interior of the housing. Avoid touching electrical components.
• Reattach the grille assembly and restore power.

8. Fejlfinding

If your fan is not operating correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact Broan-NuTone Customer Support.

9. Garantioplysninger

The Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light is backed by a Tre års begrænset garanti. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official warranty document included with your product or visit the Broan-NuTone webwebsted.

10. Supportoplysninger

For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone Customer Support:

• Webwebsted: Visit the official Broan-NuTone webwebsted for ofte stillede spørgsmål, produktregistrering og yderligere ressourcer.
• Telefon: Se kontaktoplysningerne på produktemballagen eller den officielle webhjemmeside for kundeservice telefonnumre.

Please have your model number (SPK80L) and purchase date available when contacting support.