Peak Design Travel Tripod (Aluminum) Instruction Manual

1. Introduktion

This manual provides essential information for the safe and effective use of your Peak Design Travel Tripod (Aluminum). Please read these instructions carefully before using the product to ensure optimal performance and longevity. This compact and portable tripod is engineered for professional-level stability and quick deployment, making it ideal for various photography and videography needs.

2. Nøglefunktioner

• Compact Travel Design: Reimagined for pro-level stability and features in a form that packs down to the diameter of a water bottle.
• Speedy Setup: Unique leg design allows for deployment and locking in seconds with quick-release levers.
• Professionel ydeevne: Supports up to 20 lbs (9.1 kg), suitable for full-frame DSLRs with telephoto lenses.
• Streamlined Precision: Omnidirectional ball head with a single adjustment ring for intuitive control.
• Integrated Mobile Mount: A built-in mobile mount pops out of the center column for phone photography.
• Alsidig skydning: Capable of low-angle shots, inverted setups, and enhanced stability with an integrated hook for hanging weight.

3. Hvad er der i æsken

Figure 3.1: Included components with the Peak Design Travel Tripod.

• Peak Design Travel Tripod (Aluminum Legs & Compact Ball Head)
• Integrated Mobile Mount
• Bushing Removal Tool
• 4MM and 2.5MM Hex Wrench
• ARCA Compatible Standard Plate
• Weatherproof Soft Case

4. Opsætning

4.1 Udfoldning af stativbenene

1. Hold the tripod firmly with the legs folded.
2. Locate the quick-release levers on each leg.
3. Flip open the levers and extend each leg section downwards until fully deployed.
4. Close the quick-release levers to lock the leg sections in place.

Figure 4.1: Operating the leg cams for quick setup.

4.2 Montering af dit kamera

1. Ensure the ARCA compatible standard plate is securely attached to your camera's tripod mount.
2. Align the camera plate with the quick-release receiver on the ball head.
3. Slide the camera into the receiver until it clicks securely into place.
4. Verify the camera is firmly attached by gently tugging on it.

Figure 4.2: Quick, single-handed camera attachment.

4.3 Using the Integrated Mobile Mount

1. Locate the integrated mobile mount hidden within the center column.
2. Pull the mount out and unfold it.
3. Attach the mobile mount to the ball head in place of the camera plate.
4. Secure your smartphone within the mount.

Figure 4.3: Integrated mobile mount for smartphone use.

5. Betjening af stativet

5.1 Ball Head Adjustments

• The omnidirectional ball head is controlled by a single adjustment ring.
• Rotate the ring to loosen the ball head for precise positioning of your camera.
• Tighten the ring to lock the camera securely in your desired angle.

5.2 Justering af benvinkler

• Each leg can be independently adjusted to different angles for stability on uneven terrain or for creative shots.
• Press the leg angle adjustment button at the top of each leg to change its angle.

5.3 Shooting at Various Levels

• Eye Level: Extend all leg sections and the center column to achieve maximum height.
• Jordniveau: Adjust the leg angles to their widest spread and remove the center column for ultra-low shots.
• Omvendt opsætning: The center column can be inverted to position your camera between the legs for unique perspectives.

Figure 5.1: Tripod configured for low-angle shooting.

5.4 Forbedring af stabilitet

• Utilize the integrated hook at the bottom of the center column to hang a camera bag or other weight, increasing stability in windy conditions or with heavy gear.

6. Vedligeholdelse

• Rensning: Tør stativet af med en blød,amp cloth after use, especially if exposed to sand, salt water, or dirt. Avoid harsh chemicals.
• Smøring: Periodically check leg locks and ball head for smooth operation. If needed, apply a small amount of silicone-based lubricant.
• Fastgørelsesmidler: Use the provided hex wrenches to periodically check and tighten any loose screws or fasteners.
• Opbevaring: Store the tripod in its weatherproof soft case in a dry, cool place when not in use.

7. Fejlfinding

• Benene strækker sig ikke jævnt ud/tilbage: Ensure quick-release levers are fully open/closed. Clean any debris from leg sections.
• Ball head not holding position: Ensure the adjustment ring is fully tightened. Check for any debris preventing a secure lock.
• Stativstabilitet: Ensure all leg sections are fully extended and locked. Spread legs to appropriate angles. Use the integrated hook to add weight for increased stability.
• Camera not attaching securely: Verify the ARCA plate is correctly mounted to your camera and fully inserted into the ball head's quick-release receiver.

8. Specifikationer

9. Officielle produktvideoer

10. Garanti og support

Peak Design products are designed for a lifetime of use and are backed by a comprehensive warranty. For detailed warranty information, product registration, or technical support, please visit the official Peak Design webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til garantikrav.